Inhaltszusammenfassung zur Seite Nr. 1
1ST PRINTING MAY ‘04 www .sauservice.com
®
A Game of Skill
Owner’s Manual
SEGA AMUSEMENTS USA, INC.
MANUAL NO. 999-2035
GAME CODE: GSM
Inhaltszusammenfassung zur Seite Nr. 2
VISIT OUR WEBSITE!
Inhaltszusammenfassung zur Seite Nr. 3
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety: To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the opera- tion of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. Be sure to keep this manual nearby the product or else- where conv
Inhaltszusammenfassung zur Seite Nr. 4
Specification changes (removal of equipment, conversion and addition) not designated by SEGA are not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazardous to operate the product by removing parts and or modifying the circuits. Should doors, lids and protective parts be damaged or lost, refrain from operating the product, and contact where the product was purchased from or the office herein stated. SEGA shall not be hel
Inhaltszusammenfassung zur Seite Nr. 5
TABLE OF CONTENTS BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS INTRODUCTION OF THE OWNER’S MANUAL 1. HANDLING PRECAUTIONS .......................................................................................... 1 2. PRECAUTIONS CONCERNING INSTALLATION LOCATION ................................... 3 - 4 3. OPERATION ..................................................................................................................... 5 - 6 4. ASSEMBLING
Inhaltszusammenfassung zur Seite Nr. 6
SPECIFICATIONS Installation Space : 25.5 inches width X 48 inches deep Height : 79 inches Width : 25.5 inches Length : 24 inches Weight : 200 lbs Power, maximum current : 600 W 5 A (AC 120V 60 Hz AREA) Monitor : NO MONITOR USED FOR THIS GAME INTRODUCTION OF THE OWNERS MANUAL This Owner's Manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of electronic assemblies, electrome- chanicals, servicing control, spare p
Inhaltszusammenfassung zur Seite Nr. 7
DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN Non-technical personnel who do not have technical knowledge and expertise should refrain from performing such work that this manual requires the location's main- tenance man or a serviceman to carry out, or work which is not explained in this WARNING! manual. Failing to comply with this instruction can cause a severe accident such as electric shock. Ensure that parts replacement, servicing & inspections, and troubleshooting are performed
Inhaltszusammenfassung zur Seite Nr. 8
IMPORTANT MERCHANDISING TIPS FOR BEST RESULTS, ARRANGE PREMIUM PLUSH TOYS, HIGH PERCEIVED VALUE TOYS AND PRIZES AT- TRACTIVELY WITHIN THE PRIZE DISPLAY BIN. PRIZES SHOULD BE ARRANGED WITHIN THE DISPLAY BIN TO OFFER THE PLAYER AN ENTICING AND DI- VERSE SELECTION OF PRIZES AVAILABLE. ALWAYS BLEND A VARIETY OF PRIZE CAPSULES IN YOUR GAME TO APPEAL TO A BROAD RANGE OF MALE AND FEMALE PLAYERS. A GAME THAT DIS- PLAYS PRIMARILY TEDDY BEAR PLUSH FOR EX- AMPLE, MAY ONLY APPEAL TO A SPECIFIC PLAYER
Inhaltszusammenfassung zur Seite Nr. 9
1. HANDLING PRECAUTIONS When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine. ● Before performing work, be sure to turn power off. Performing the work without turning power off can cause an electric shock or short circui
Inhaltszusammenfassung zur Seite Nr. 10
● For the IC board circuit inspections, only the logic tester is allowed. The use of a STOP multiple-purpose tester is not permitted, so be careful in this regard. ● Static electricity from your body may damage some electronics devices on the IC IMPORTANT! board. Before handling the IC board, touch a grounded metallic surface so that the static electricity can be discharged. ● Some parts are the ones designed and manufactured not specifically for this game machine. The manufacturers may disco
Inhaltszusammenfassung zur Seite Nr. 11
2. PRECAUTIONS CONCERNING INSTALLATION LOCATION This product is an indoor game machine. Do not install it outside. Even indoors, avoid installing in places mentioned below so as not to cause a fire, electric shock, injury and WARNING! or malfunctioning. ● Places subject to rain or water leakage, or places subject to high humidity in the proximity of an indoor swimming pool and or shower, etc. ● Places subject to direct sunlight, or places subject to high temperatures in the prox- imity of h
Inhaltszusammenfassung zur Seite Nr. 12
48 in. Vent approx. 8 in. Operation Area ● For the operation of this machine, secure a minimum area of 25.5 in. (W) × 48 in. (D). In order to prevent injury resulting from the falling down accident during game play, be sure to secure the minimum area for operation. WARNING! ● Be sure to provide sufficient space so as to allow this product's ventilation fan to function efficiently. To avoid machine malfunctioning and a fire, do not place any obstacles near the ventilation opening. ● SEGA shall
Inhaltszusammenfassung zur Seite Nr. 13
3. OPERATION PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players. In order to avoid accidents, check the following before starting the operation: ● To ensure maximum safety for the players and the customers, ensure that where the product is operated has sufficient lighting to allow any warnings to be read. Op- WARNING! eration under insufficient lighting can cause
Inhaltszusammenfassung zur Seite Nr. 14
● Immediately stop such violent acts as hitting and kicking the product. Such violent acts can cause parts damage or falling down, resulting in injury due to fragments and falling down. CAUTION! ● Do not put any heavy item on this product. Placing any heavy item on the product can cause a falling down accident or parts damage. ● Do not climb on the product. Climbing on the product can cause falling down ac- WARNING! cidents. To check the top portion of the product, use a step. ● To avoid
Inhaltszusammenfassung zur Seite Nr. 15
4. ASSEMBLING AND INSTALLATION ● Perform assembly work by following the procedure herein stated. Failing to comply with the instructions can cause electric shock hazard. ● Perform assembling as per this manual. Since this is a complex machine, erroneous WARNING! assembling can cause an electric shock, machine damage and or not functioning as per specified performance. ● When assembling, be sure to use more then one person. Depending on the assembly work, there are some cases in which work
Inhaltszusammenfassung zur Seite Nr. 16
48 in. Vent approx. 8 in. 25.5 in. FIG. 6. 2 e Provide ventilation space for the ventilation opening. Allow more than 28 in. of space for customer traffic. www .seuservice.com 8
Inhaltszusammenfassung zur Seite Nr. 17
POWER SUPPLY, AND EARTH CONNECTION ● Be sure to independently use the power supply socket outlet equipped with an Earth Leakage Breaker. Using a power supply without an Earth Leakage Breaker can WARNING! cause a fire when electric leakage occurs. ● Ensure that the "accurately grounded indoor earth terminal" and the earth wire cable are available (except in the case where a power cord plug with earth is used). This product is equipped with the earth terminal. Connect the earth terminal and
Inhaltszusammenfassung zur Seite Nr. 18
5. PRECAUTIONS WHEN MOVING THE MACHINE ● When moving the machine, be sure to unplug the power plug. Moving the machine with the plug as is inserted can damage the power cord and cause fire and electric WARNING! shock hazards. ● When moving the machine on the floor, pay careful attention so that adjusters do not tread power cords and earth wires. Damaging the power cords can cause electric shock and short circuit hazards. ● Do not push the cabinet from the left/right when attempting to move
Inhaltszusammenfassung zur Seite Nr. 19
6. NAME OF PARTS Playfield Plex Player Score Moving Handle Play Field Shooter Mech. Display Bin Coin Door Optional Bill Acceptor Door Service Door Cashbox Power Inlet Prize Outlet Wheels TABLE 4 Dimensions and Weights Width x Length x Height Weight CABINET 29.25 in x 24 in x 79 in 200 LBS When assembled 29.25 in x 24 in x 90 in 200 LBS 11 www .seuservice.com
Inhaltszusammenfassung zur Seite Nr. 20
7. GAME DESCRIPTION The following explanations apply to the case the product is functioning satisfactorily. Should there be any moves different from the following contents, some sort of faults may have occurred. Immediately look into the cause of the fault and eliminate the cause thereof to ensure satisfactory operation. When the power is connected, the fluorescent lamps light up, and the game enters a test mode. In this mode the game runs the Auger up and down to locate a “Large” Prize an
