Inhaltszusammenfassung zur Seite Nr. 1
MODEL T10035/T10036
STEEL/ALUMINUM JACKS
INSTRUCTION SHEET
T10035 Specifications
Maximum Lifting Capacity ....................3,000 lbs.
1 1
Lifting Range .......................................3 ⁄2"–15 ⁄2"
To reduce the risk of death, serious personal
Weight .......................................................35 lbs.
injury or property damage when using these
jacks:
• DO NOT overload this jack beyond its
T10036 Specifications
rated capacity. Overloading may result
Maximum Lifting Capa
Inhaltszusammenfassung zur Seite Nr. 2
Maintenance Bleeding the Air Keep the hydraulic ram clean and free of any dust, If the jack becomes spongy or will not rise when dirt, or foreign debris. Abrasive material stuck to pumped, then air bubbles may be in the hydraulic the ram can damage the hydraulic seal when the system. These air bubbles must be bled from the ram is retracted back into the jack. Regularly wipe hydraulic fluid before the jack can be safely oper- the hydraulic ram clean with a lightly oiled rag. ated. The jack wil
Inhaltszusammenfassung zur Seite Nr. 3
T10035 Main Parts Breakdown �� �� �� �� �� � � � � � � � � �� �� �� �� �� �� �� � �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� 3 T10035/T10036 Steel/Aluminum Jacks
Inhaltszusammenfassung zur Seite Nr. 4
T10036 Main Parts Breakdown �� �� � �� �� � � �� � �� �� � �� �� �� �� � � �� �� �� �� �� � �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� The machine label warns about hazards and ways to prevent injury. The owner of the jack MUST maintain the original location and readability of the label. If the label is removed or becomes unreadable, contact Grizzly at (800) 523-4777 or www.grizzly.com to order a new label. 4 T10035/T10036 Steel/Aluminum Ja
Inhaltszusammenfassung zur Seite Nr. 5
T10035 Main Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PT10035001 RUBBER PAD 23 PW04M FLAT WASHER 10MM 2 PT10035002 SADDLE AXIS 24 PT10035024 SCREW BUSHING 3 PT10035003 SADDLE 25 PT10035025 LINKAGE SCREW 4 PT10035004 LIFTING ARM 26 PT10035026 STRENGTHEN ROD 5 PT10035005 LIFT ARM AXIS 27 PR18M EXT RETAINING RING 17MM 6 PT10035006 LINKAGE (LONG) 28 PT10035028 HANDLE YOKE AXIS PIN 7 PR03M EXT RETAINING RING 12MM 29 PT10035029 PRESS WHEEL SHAFT 8 PT10035008 FRONT WHEEL AXIS 30 PT1003
Inhaltszusammenfassung zur Seite Nr. 6
T10035 Hydraulic Pump Parts Breakdown ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� REF PART # DESCRIPTION REF PART # DESCRIPTION 101 PT10035101 BASE 123 PW26MM FLAT WASHER 22MM 102 PT10035102 STEEL BALL 6 124 PT10035124 CYLINDER 103 PORP006 O-RING 5.8 X 1.9 P6 125 PORP022-4 O-RING 22.1 X 3.5 P22.4 104 PT10035104 COLLAR 126 PT10035126 CUP PACKING 105 PT10035105 COLLAR PIECE 127 PT10035127 VALVE 106 PT10
Inhaltszusammenfassung zur Seite Nr. 7
T10036 Hydraulic Pump Parts Breakdown ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� REF PART # DESCRIPTION REF PART # DESCRIPTION 101 PT10036101 BLOCK LINKAGE 119 PT10036119 BALL PLUNGER 102 PT10036102 COTTER PIN 120 PT10036120 ADJUSTABLE SPRING 103 PT10036103 TOP NUT 121 PORP007 O-RING 6.8 X 1.9 P7 104 PORP029-5 O-RING 29.2 X 3.5 P29.5 122 PT10036122 SPECIAL SCREW 105 PT100
Inhaltszusammenfassung zur Seite Nr. 8
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ������ ���� �������� ������ ���� ��������� � ���� ������� � ��� ���� ��������� ������� � � ������� �������� � � ������� �������� ������� ��� ����� � � ����������������������� �������� � � � � ����� ������ � ���� � ���� ����� ������ �������
