Inhaltszusammenfassung zur Seite Nr. 1
GB
LCD TELEVISION
INSTRUCTION MANUAL
DLT-32G1
DLT-37G1
DLT-42G1
Inhaltszusammenfassung zur Seite Nr. 2
Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. T he lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi- cient magnitude to constitute the risk of an electric shock. T he exclamation p
Inhaltszusammenfassung zur Seite Nr. 3
Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain them safely for future reference. Follow all operations and instructions accordingly. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning Unplug the TV fr
Inhaltszusammenfassung zur Seite Nr. 4
Important Safeguards 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, ex- treme care should be taken from touching such power lines or circuits as contact with them might be fatal. 13. Overloading Do not overload wall outlets and extension leads as this can result in a risk of fire or electric shock.
Inhaltszusammenfassung zur Seite Nr. 5
Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. Ignoring or disregarding the contents of this section and im- proper operation of the product may result in the person’s WARNING death or serious injury. In case of an accident, please unplug the unit from the outlet immediately. To reduce the risk of electric Do not put any objec
Inhaltszusammenfassung zur Seite Nr. 6
Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. Ignoring or disregarding the contents of this section and improper operation of the product may result in the per- CAUTION son’s death or serious injury. Please keep the user’s manual in a safe place for future reference. Do not view the TV too close- Refer servicing to qualified
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents Installation and Maintenance Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Video Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Camcorder & Video Game Connection . . . . . . . . . . . . . . . . 13 DVD Player Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 14 STB (Set Top Box) Connection . . . . .
Inhaltszusammenfassung zur Seite Nr. 8
Supplied Accessories Make sure that the following accessories are provided with the product. AC lead Instruction manual Cover Bottom (except DLT-42G1 model) - When you install on a wall mounting you can fit cover bottom as shown in upper picture. Remote control Batteries Cable holder A The method of wire arrangement 1. Assemble the cable holder enclosed on the back of TV. (PICTURE1) (ASSEMBLY METHOD: After you push the (peg part of cable holder) „A” in the hole, rotate the cable holder c
Inhaltszusammenfassung zur Seite Nr. 9
Antenna Connection Indoor Antenna Connection Not recommended unless very close to the transmitter Not recommended unless very close to the transmitter. 1. Connect the feeder cable of the antenna to the combining adapter. WHEN THE IMAGE IS NOT CLEAR : Unclear screen image and bad reception may be a cause of a wrong antenna connection. Be sure to check its direction and site when installing. combining adapter 2. Connect the combining adapter to the antenna input at the left side of the TV set.
Inhaltszusammenfassung zur Seite Nr. 10
Antenna Connection CTV Antenna Connection Such community TV Antenna installation may be found in most of communial apartments. When a coaxial cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right. Antenna socket on the wall Antenna socket at the left side of the TV set ANT/CABLE 10
Inhaltszusammenfassung zur Seite Nr. 11
Antenna Connection Outdoor Antenna Connection An outdoor Antenna connection-such as VHF and/or UHF-may be necessary for installation in private houses. Single Antenna Connection VHF Antenna Left side of the tv set UHF Antenna ANT/CABLE UP-GRADE PORT Separate Antenna Connection. VHF Antenna In case of coaxial cable In case of feeder cable ANT/CABLE UHF Antenna ANTENA combining Adapter (Separate purchase) 11
Inhaltszusammenfassung zur Seite Nr. 12
Video Connection Connecting with an External Source You may connect an S-Video input to enjoy clearer and brighter picture images. You can make the connection with the AV3 input. S-Video Note : If S-video and the RCA phono jacks are connected at the same time, the TV set will only detect the S-Vid- eo mode. • If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is recom- mended for better picture quality. Connecting with SCART VIDEO 1. Prepare the scar
Inhaltszusammenfassung zur Seite Nr. 13
Camcorder & Video Game Connection Watching a Camcorder Recording on TV or playing a Video Game 1. Prepare the S-video and RCA connector. 2. These connectors connect to S-video or AV 3 as shown in the picture below. 3. Turn on the TV set and camcorder/video game. 4. Select AV3/S-video mode, using the ”AV”button of the Remote controller or “ ” button of the TV set. Side of the tv set Camcorder Video game Note : If the S-video and RCA jack are connected at the same time, the TV set only detects th
Inhaltszusammenfassung zur Seite Nr. 14
DVD Player connection When connecting with a component cable or Euro SCART cable INPUT HDMI 1 HDMI 2 OPTICAL COMPONENT DIGITAL Pr Pb Y AUDIO PC INPUT R - AUDIO - L PC AUDIO Back of the tv set DVD Note : • You can use a scart cable but some DVD’s have a component output for a better picture. • When you connect with a component video, output from your DVD player to the TV please check that the col- our of the cables between the DVD and TV set. Matches the sockets on both appliance. When con
Inhaltszusammenfassung zur Seite Nr. 15
STB(Set Top Box) Connection When connecting with a HDMI cable Back of the tv set INPUT HDMI 1 HDMI 2 OPTICAL COMPONENT DIGITAL Pr Pb Y AUDIO PC INPUT R - AUDIO - L PC AUDIO Set Top Box When connecting with a component cable Back of the tv set INPUT HDMI 1 HDMI 2 OPTICAL COMPONENT DIGITAL Pr Pb Y AUDIO PC INPUT PC AUDIO R - AUDIO - L Set Top Box 15
Inhaltszusammenfassung zur Seite Nr. 16
PC Connection When connecting with PC(D-Sub) cable. 1. First adjust resolution of the PC. (Refer to table in page 17.) 2. Then disconnect your monitor from your PC and connect between PC and TV set using the D-sub and Audio ca- ble as shown in the picture below. 3. Turn on the PC and TV set. 4. Select PC mode by pressing the “MULTIMEDIA” button on the remote control or ” ” button of the TV set. INPUT HDMI 1 HDMI 2 OPTICAL COMPONENT DIGITAL Pr Pb Y AUDIO PC INPUT PC AUDIO R - AUDIO - L Back
Inhaltszusammenfassung zur Seite Nr. 17
PC Connection PC CONNECTION NOTES: 1) The resolution of the TV set is best at 1360(6) x 768(WXGA). 2) If there is a [Vertical Frequency] setting menu in the [Display] Menu of the PC, adjust the frequency to 60Hz. 3) If the PC resolution is too high, it may be hard to detect signals. Select a suitable resolution. 4) HDMI input port receives only digital Signal. 5) Depending on the graphic card when you plug & unplug the HDMI connection the screen may not display cor- rectly. Restart the compute
Inhaltszusammenfassung zur Seite Nr. 18
Cable TV Broadcasting Connection External Input Connection Source Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver. You may make the connection to either the Component input or SCART input AV1 or AV2. Input Cable TV CATV Receiver Broadcasting Station Back of the tv set INPUT HDMI 1 HDMI 2 OPTICAL COMPONENT DIGITAL Pr Pb Y AUDIO PC INPUT PC AUDIO R - AUDIO - L Antenna Input Connection Watching cable televis
Inhaltszusammenfassung zur Seite Nr. 19
Connect with the Dolby Digital AMP. If you connect the optical output to a Dolby digital AMP, you can listen to better quality sound. (Only DVB-T Mode) Back of the tv set INPUT HDMI 1 HDMI 2 OPTICAL COMPONENT DIGITAL Pr Pb Y AUDIO PC INPUT R - AUDIO - L PC AUDIO Optical output I N P U T Dolby Digital AMP L Woofer Centre R Surround L Surround R 19
Inhaltszusammenfassung zur Seite Nr. 20
Name of Each Part Front / Side Panel The buttons on the TV set have the same functions as those of the remote control. Control Key Buttons. TV/VIDEO Button : Each time you press this button, the TV will cycle through: TV / AV1 / AV2 / AV3(S-Video) / COMP / PC / HDMI1 / HDMI2. MENU Button : Use this button to enter and exit the MENU. VOL Buttons : Use these buttons to change your TV’s volume or to move the cursor in the menu. PR Buttons : Use these buttons to change channels on your TV or
