Inhaltszusammenfassung zur Seite Nr. 1
32
L32W961
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENT DIGITAL TELEVISION TRANSITION NOTICE ....................................... 1 FOR YOUR SAFETY ........................................................................................ 2 PRECAUTIONS AND REMINDERS ........................................................... 3 IMPORTANT SAFETY INSTRUCTIONS ...................................................4 PACKAGE CONTENTS.................................................................................5 PREPARATION................
Inhaltszusammenfassung zur Seite Nr. 3
DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 12, 2009. Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive over the air digital programming, but should continue to work as before for other purposes (e.g., for watching low-power TV stations still
Inhaltszusammenfassung zur Seite Nr. 4
FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) This equipment has been tested and found to comply with the limits for a Class B digital NOTE: device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener
Inhaltszusammenfassung zur Seite Nr. 5
PRECAUTIONS AND REMINDERS Place unit on even surfaces. Unplug immediately if other Do not cover or block foreign materials are put any vents and openings. inside TV box or if the TV Inadequate ventilation may shorten the life of fell down. the display unit and cause overheating. Unplug immediately if is Prohibit/Avoid opening TV Avoid direct sunlight, dusty, malfunction like no picture, cabinet. high humidity and smoky no video/audio,smoke and areas. bad odor from TV. Don't throw any o
Inhaltszusammenfassung zur Seite Nr. 6
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Inhaltszusammenfassung zur Seite Nr. 7
digital-to-analog converter boxes. CONSUMER ALERT – This television receiver has only an analog broadcast tuner and will require a converter box after June 12,2009,to receive over-the-air broadcasts with an antenna because of the Nation's transition to digital broadcasting. Analog-only TVs should continue to work as before with cable and satellite TV services, gaming consoles, VCRs, DVD players, and similar products, For more information, call the Federal Communications Commission at 1-88
Inhaltszusammenfassung zur Seite Nr. 8
PREPARATION IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. ATTACHING THE BASE IMPORTANT: The Base of the HDTV must be assembled prior to usage. 1. Place TV unit face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the HDTV. 2. Carefully align and insert the Base to the stand. 3. Insert the screws to the botto
Inhaltszusammenfassung zur Seite Nr. 9
Please make sure to connect the power plug 3. Remote control: to the wall outlet socket after connecting the Remove the cover of the battery TV to the power cord! compartment. Insert the 2 batteries supplied (Type AAA 1.5V). 1. Install the base stand; place the TV on a solid surface. Min 1m Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. 4. Power: To prevent any unsafe situations, no naked Insert the power
Inhaltszusammenfassung zur Seite Nr. 10
PERIPHERAL CONNECTION GUIDE AC POWER 3 1. HDMI – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. 2. PC IN – Connect the video and audio cables from a computer here. 3. AV IN (AV/S-VIDEO) – Connect the primary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from th
Inhaltszusammenfassung zur Seite Nr. 11
1 2 3 4 5 6 7 OPERATING INSTRUCTIONS TO USE THE FRONT PANEL CONTROL 1 VOL + VOL +: Press to increase the sound volume level. 2. VOL - VOL - : Press to decrease the sound volume level. 3. CH CH +: Press to select the next higher Program number. 4. CH CH - : Press to select the next lower Program number. 5. MENU Menu key: Press to open or exit the OSD (on-screen display) menu. 6. INPUT Source key: Press to select the input source. Power key: Press to turn on / off (standby) the TV set. (Press to
Inhaltszusammenfassung zur Seite Nr. 12
TO USE THE REMOTE CONTROL CC POWER Press repeatedly to change the Press to turn ON/OFF (standby) the TV. (Note: 1.TV is never closed caption type as CC Off/ completely powered off unless CC On/CC On With Mute. physically unplugged. 2. Press WIDE to turn on TV after the power Press to choose the display SOURCE MUTE on status, LED had changed aspect as: Auto, Normal, Zoom, to the Blue color and stopped Wide, or Cinema mode. flashing.) MTS/SAP SOURCE Press to activate the NTSC TV Press re
Inhaltszusammenfassung zur Seite Nr. 13
VIEWING MODELS ILLUSTRATIONS Normal Mode The original content would be at the center of the screen. 16:9 Content 4:3 Content Wide Mode The original content in this mode has to fill the entire screen of the display. 16:9 Content 4:3 Content ZOOM Mode For those wide format images which are originally programmed into 4:3 frames with black bars around, this mode would stretch the image in both width and height for full display with active data. Same image in ZOOM mode CINEMA Mode This mode is app
Inhaltszusammenfassung zur Seite Nr. 14
CONNECTING EQUIPMENT Using the Antenna or Cable for your VCR Coaxial (RF) Using Your Antenna or Digital Cable for DTV. 1. Turn off the HDTV and VCR. 2. Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of your VCR to the ANTENNA/CABLE 1. Turn off the HDTV. DIGITAL/ANALOG connector at the rear of the HDTV. 2. Connect the coaxial (RF) connector from your antenna or digital cable (out-of- 3. Turn on the HDTV and VCR. the-wall, not from the Cable Box) to the 4. S
Inhaltszusammenfassung zur Seite Nr. 15
Connecting your HDTV Set-Top Box For HDTV Set-Top Boxes with DVI (Best) 1. Turn off the HDTV and HDTV Set-Top Box. 2. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI Input at the rear of the HDTV. 3. Turn on the HDTV and HDTV Set-Top Box. 4. Select HDMI using the SOURCE button on 1. Turn off the HDTV and HDTV Set-Top the remote, side of the HDTV, or directly Box. by pressing the HDMI/PC button on the Remote Control. 2. Connect a HD
Inhaltszusammenfassung zur Seite Nr. 16
Using Component Video Connecting Your Basic Set-Top Box Connecting your HDTV Set-Top Box Using Composite Video (Better): 1. Turn off the HDTV and Set-Top Box. 1. Turn off the HDTV and HDTV Set-Top 2. Using an AV Cable, connect the Video Box. (yellow color) connector on your Set-Top 2. Connect the Pr (red color) connector Box to the corresponding Video (yellow on your HDTV Set-Top Box to the color) connector in the AV group at the corresponding Pr (red color) connector in rear of the
Inhaltszusammenfassung zur Seite Nr. 17
Using Coax (RF) Connecting Your DVD Player Using HDMI DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the LCD HDTV for optimal results. Connecting your DVD Player (Best) 1. Turn off the HDTV and Set-Top Box. 2. Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your Set Top Box and the other end to the TV input at the rear of the HDTV. 3. Turn on the HDTV and Set-Top Box. 1. Turn off the
Inhaltszusammenfassung zur Seite Nr. 18
Using Component Video Using S-Video (AV) Connecting your DVD Player (Better) Connecting your DVD Player (Good): 1. Turn off the HDTV and DVD player. 1. Turn off the HDTV and DVD player. 2. Connect the Pr (red color) connector on 2. Connect the S-Video jack on the rear of your DVD player to the corresponding Pr your DVD player to the S-Video jack in the (red color) connector in the Component AV group on the rear of the HDTV. at the rear of the HDTV. 3. Connect an audio cable (white and
Inhaltszusammenfassung zur Seite Nr. 19
Using Composite (AV) Video Connecting Y our VCR or Video Camera Connecting your DVD Player (Good) 1. Turn off the HDTV and VCR or Video 1. Turn off the HDTV and DVD player. Camera. 2. Connect the Video (yellow color) 2. Connect the S-Video jack on the rear of connector on your DVD player to the your VCR or Video Camera to the S-Video Video (yellow color) connector in the AV jack in the AV group on the rear of the group. HDTV. 3. Connect the R (red color) and L (white 3. Connect an
Inhaltszusammenfassung zur Seite Nr. 20
Connecting to a PC 1. Turn off the HDTV and PC. 2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your PC and the other end to the VGA input at the rear of the HDTV. 3. Connect the Audio Out on your computer to the AUDIO input at the rear of the HDTV. 4. Turn on the HDTV and PC. 5. Select VGA using the SOURCE button on the remote, side of the HDTV or directly by pressing the HDMI/PC button on the Remote. NOTE For the best picture quality when connecting a computer thro
