Inhaltszusammenfassung zur Seite Nr. 1
ORET_ __.oo_oo._,No o_.. oN
55" 1080p/120Hz LCD Television
LC55 VFZ61
AIR (TV)/CABLE MODE SELECTION
The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory.
If you want to use an antenna for the built-in TV tuner, this menu option must be set to the
"Air" mode. Please refer to page 11 of the owner's manual for the details of this menu.
Inhaltszusammenfassung zur Seite Nr. 2
Contents Caution 1 2 Safety Information Unit and Accessories 3 Product Feature 3 4 Product Introduction Connections 5 Remote Control 6-7 Basic Operation 8 OSD Menu 9-15 1. Video menu 9-10 2. Audio menu 10 3. TV menu 11 12 4. Setup menu 5. Parental menu 13-15 Simple Troubleshooting 16 Technical Specifications 17 INSTRUCTION FOR WALL MOUNT 18 VIORE Limited Warranty 20
Inhaltszusammenfassung zur Seite Nr. 3
Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Correct
Inhaltszusammenfassung zur Seite Nr. 4
Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety ° The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor. ° To prevent overload, don't share the same mains supply socket with too many other items of equipment. - Do not place any connecting wires where they may be stepped on or tripped over.
Inhaltszusammenfassung zur Seite Nr. 5
Unit and Accessories TV set User's Manual Remote control AC Power Cable Product Feature • Integrated ATSC TV tuner for HDTV broadcast reception • Three HDMI input for true digital connections • VGA port for connection to PC 3
Inhaltszusammenfassung zur Seite Nr. 6
Product Introduction Front View H ? \ I E III III ml Power Indicator Cq)ontrol window Remote (Keep clear) 1). (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby)LED Indicator: Press Power Button to turn on and off. Indicator on(Red) Standby mode Power on mode Indicator on(Green) The effective receiving range for the signal is 5-8 metres from the front of the remote control window, and 300 to the left or right side and 200 above or below the remote control wind
Inhaltszusammenfassung zur Seite Nr. 7
Connections ® ®®®®®®®® qiiiiEiiiiiiiiiii _qiiili!ii!iii •••_ qiii!ili iiili ilii •i¸_ ® _f_:_,_,_ ....... P® ®®0®®®®® _t Coax,_ I [m Y Pb Pr LIN RIN el Video LIN RIN 21 Headphone out AC POWER IN SWITCH S_° _IY Pb P_ LIN R'N Ji IIVMe° ___ LIN __R'NIIIPc'_ __ ,--i _ vGj, 1). Service: USB port for service 2). HDMII/2/3: Connect them to the video output terminal of the external device 3). VGA: For PC display Connect it to the D-Sub 15 pins analog output connector of the PC 4). S-VIDEO: Connect it to
Inhaltszusammenfassung zur Seite Nr. 8
Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. 6
Inhaltszusammenfassung zur Seite Nr. 9
Remote Control Installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery compartment. Don't mix different types or used batteries with new ones. 3. Close the cover. ,_ Batteries shall not be exposed to excessive heat such as sunshine or fire. - The remote control should be operated within 30 feet(7m) and 30 o to the left and right of the IR receive at the front of the LCD
Inhaltszusammenfassung zur Seite Nr. 10
Basic Operation Power on/off 1. Connect to the power supply with the power code. 2. -To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select Press INPUT button on the TV set or remote control to display input source menu, and use CH+/- button on the TV set or A/V button on remote control to select the input source, press OK button on the remote control to enter. Note: Before you select the input sou
Inhaltszusammenfassung zur Seite Nr. 11
OSD Menu 1. Video menu Note: The item Color, Sharpness and DNR will not display in VGA mode; The item Tint will display only in NTSC mode; The item VGA will display only in VGA mode. Picture Mode: Select your desired picture mode. You may select the picture mode directly by pressing the PICTURE button on the remote control. Brightness: Adjust image black level. Contrast: Adjust image contrast. Color: Adjust image color.(Invalid in VGA mode) Sharpness: Adjust the sharpness.(Invalid in VGA mode) N
Inhaltszusammenfassung zur Seite Nr. 12
OSD Menu Auto adjust: Setup the parameter of the screen automatically. H/V Position: Adjust the transverse/vertical position of the screen. Phase: Adjust the phase of the ADC sampling clock relative to the sync signal, until a stable image is obtained. Clock: Adjust the pixel clock frequency, until the image size is maximized for the screen. DNR: If the broadcast signal received is weak, you can select the DNR option to reduce the video noise level between Off, Low, Mid and High.(Invalid in VGA
Inhaltszusammenfassung zur Seite Nr. 13
OSD Menu 3. TV menu (in TV mode) Description Tuner Mode: Select Cable or Air as the tune mode. Channel Scan: Press > to start channel auto scan, This process will find all available Analog and Digital channels and store them. Note: When the TV is auto tunning, you could press MENU button to stop auto tunning and return to preview menu. Channel Skip Use A / V button to select the channel you want to skip, and press OK button to sign on th right, and the channel will be skipped when you view the c
Inhaltszusammenfassung zur Seite Nr. 14
OSD Menu 4. Setup menu OSD Language: Select OSD language. OSD Transparency: Change the OSD transparency. Time Setu Time zone: Select the time zone. Time: Setup time for the TV in the Time menu. Sleep Timer: Setup the sleep timer(Auto shut down the TV). Time Display Mode: Change the time display mode. Caption Analog Closed Caption: Setup the Closed Caption for analog channels. Digital Closed Caption: Setup the Closed Caption for digital channels. Digital Caption Style: Setup the digital caption s
Inhaltszusammenfassung zur Seite Nr. 15
OSD Menu 5. Parental menu Note: you shoud enter the passward (default passward:O000) to enter the the Parental menu Program Block Rating Enable: Turn on/off the Progam Block function. U.S. TV Ratings: Use A / V/< / > button to select, and press OK button to sign (blocked). U.S. Movie Ratings: Use A / V button to select, and press OK button to sign (blocked). 13
Inhaltszusammenfassung zur Seite Nr. 16
OSD Menu Canadian English Ratings: Use A / V button to select, and press OK button to sign (blocked). Canadian French Ratings: Use A / V button to select, and press OK button to sign (blocked). Open V-Chip: Use A / V button to select, and press OK button to set the open V-Chip setinggs Change Password: Change the password in the submenu for parental control. Clear All: Press OK button to clear all settings. 14
Inhaltszusammenfassung zur Seite Nr. 17
OSD Menu Parental Control Press Enter to enter the sub-menu and then uses the 0-9 to enter the correct password : 0,0,0,0. If used, this optional feature can "block" undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or "block" the programming that can appear on the TV. Parental control allows the user the capability of defining which program rating they consider accept-able, to the younger or more sensitive vie
Inhaltszusammenfassung zur Seite Nr. 18
Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance. No power - Check all connections to the TV. - Press either the power button or the Standby button on the Remote control. No picture or sound - Ensure that the TV is plugged in and the power i
Inhaltszusammenfassung zur Seite Nr. 19
Technical Specifications 55" (measured diagonally) TFT LCD LCD Panel Panel Size Brightness 500cd/m 2 10000:1 Dynamic Contrast Ratio BROADCAST SIGNAL SYSTEM NTSC=M + ATSC ANTENNA INPUT IMPEDANCE 750 SOUND OUTPUT 8Wx2 Max. Resolution 1920x1080 VIDEO 2 S-VIDEO 1 2 YPbPr Input Connector 4 AUDIO (L/R) PC/AUDIO 1 HDMI 3 RF 1 SPDIF 1 Output Connector HEADPHONE 1 Power Source 100-240V _-_, 50/60HZ 350W Power Consumption * Product specifications and appearance are subject to change without notice. 17
Inhaltszusammenfassung zur Seite Nr. 20
INSTRUCTION FOR WALL MOUNT The wall mount kit (not included) with your purchase allows you to mount your VIORE TV on the wall. For detailed information on installing the wall mount, refer to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation. VIORE is not responsible for any damage to the product or injury to yourself or others resulting from the wall-mounting. VESA Dimensions for Wa
