Bedienungsanleitung Field Controls SWGII-6

Inhaltszusammenfassung zur Seite Nr. 1

REPAIR MOTOR KIT
Model: SWG-4HD, SWGII-4HD, SWG-5
SWGII-5, SWG-6, SWGII-6
BEFORE WORKING ON POWER VENTER,
SHUT OFF ELECTRICAL POWER TO CONTROL BOX


















This kit includes a replacement motor assembly for the SWG and SWGII series sidewall power venter
models listed above.






ITEMS INCLUDED:
Replacement Motor and Blower Wheel on Mounting Bracket
Mounting Fasteners
1/8" Hex wrench
Tube of high temperature silicone sealant
Instruction Sheet

Inhaltszusammenfassung zur Seite Nr. 2

IDENTIFY WHICH MODEL POWER VENTER YOU HAVE CAUTION: Avoid applying excess pressure on the blower wheel when handling. This will cause an imbalance of the blower wheel which will result in excessive vibration and premature motor failure. REMOVAL 1. Remove motor cover. (See Figure 1) 2. Remove the electrical box cover and disconnect the conduit and wires. (See Figure 2) It is not necessary to disconnect the wires from the Control Kit. 3. Remove the nuts securing the motor assembly, and p