Inhaltszusammenfassung zur Seite Nr. 1
MODEL
LC-32AX3X
LC-37AX3X
LCD COLOUR TELEVISION
OPERATION MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
LC-32AX3X LC-37AX3X LCD COLOUR TELEVISION OPERATION MANUAL Contents Contents …………………………………………………… 1 AV mode selection …………………………………… 25 Trademarks ………………………………………………… 2 OPC (Optical Picture Control) setting ……………… 25 Dear SHARP customer …………………………………… 3 Picture adjustments …………………………………… 26 Important Safety Precautions ………………………… 3 Advanced ……………………………………………… 27 Supplied accessories …………………………………… 5 Colour temperature ……………………………… 27 Preparation ………………………………………………… 6 Black ……………………………………………… 27
Inhaltszusammenfassung zur Seite Nr. 3
Contents Useful adjustment settings ……………………………… 30 Password setting for child lock (for TV input mode) ……………………………… 30 Input Label …………………………………………… 31 Image position ………………………………………… 31 Wide Screen Signalling (WSS) ……………………… 32 Picture aspect ratio …………………………………… 32 WIDE mode …………………………………………… 33 Rotate …………………………………………………… 34 Language setting for on-screen display …………… 34 Audio Only ……………………………………………… 35 DNR (Digital Noise Reduction) ……………………… 35 HDMI Setup …………………………………………… 35 Input Select
Inhaltszusammenfassung zur Seite Nr. 4
Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble- free operation of your product, please read the Important Safety Precautions carefully before using this product. Important Safety Precautions Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. Howev
Inhaltszusammenfassung zur Seite Nr. 5
Important Safety Precautions • Cleaning—Unplug the AC cord • The LCD panel used in this from the AC outlet before cleaning product is made of glass. the product. Use a damp cloth to Therefore, it can break when the clean the product. Do not use product is struck forcefully or with liquid cleaners or aerosol a sharp object. If the LCD panel is cleaners. broken, be careful not to be injured by broken glass. • Water and moisture—Do not use the product near water, such as • Heat sources—Keep the pro
Inhaltszusammenfassung zur Seite Nr. 6
Supplied accessories Make sure the following accessories are provided with the product. Remote control unit “AAA” size battery (g2) AC cord Page 13 Page 6 Page 7 Cable clamp Safety restraints Screw Clamps Screws for Restraining for band clamps band Page 7 Page 8 Operation manual NOTE • Always use the AC cord supplied with the TV. • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. • The examples used t
Inhaltszusammenfassung zur Seite Nr. 7
Preparation Inserting the batteries Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries. 1 Open the battery cover. 2 Insert two supplied “AAA” size 3 Close the battery cover. batteries. • Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment. CAUTION Improper use of batteries can res
Inhaltszusammenfassung zur Seite Nr. 8
Preparation Setting the TV Notes on installing the TV • Avoid direct sunlight and place the TV in a well-ventilated location. • Place the TV in a level location. Removing the terminal cover 1 TV (rear view) Press down the hooks to remove the cover toward you. 2 Connecting the AC cord, antenna, and external equipment to the TV AC cord See pages 9 and 41–43 for connecting antennas and external equipment, such as VCR and DVD player. 3 Bundling the cables and closing the terminal cover Insert the ca
Inhaltszusammenfassung zur Seite Nr. 9
Preparation Protection against overturning There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip-resistant measurement for your safety. View from the top Anchoring the TV to the wall or a pillar Hook (commercially available) 1 Fix the product with the 2 clamps Wall (supplied), using the screws (supplied). Tie (commercially available) 2 Fix the TV to the wall using extra strong ties (commercially available). Clamps (supplied) Screw
Inhaltszusammenfassung zur Seite Nr. 10
Preparation Simple operations for watching a TV programme Basic connection Connecting to an antenna To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial cable. Standard DIN45325 plug (IEC169-2) 75-ohm coaxial cable (round cable) Antenna cable (commercially available) To antenna Room antenna terminal terminal (75-ohm type) Connecting to the power outlet Rear view NOTE • Always turn off the power of the TV wh
Inhaltszusammenfassung zur Seite Nr. 11
Preparation Setting the TV on the wall • You can mount the TV on the wall, using the optional AN-37AG2 bracket for LC-32AX3X/LC-37AX3X. • For details, refer to the instructions supplied with the optional bracket. CAUTION • Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or in
Inhaltszusammenfassung zur Seite Nr. 12
Part names TV (Front) Channel up (r)/down (s) buttons TV/VIDEO button Volume up (+)/down (–) buttons POWER (On/Off) button Remote control sensor OPC sensor OPC indicator* POWER indicator SLEEP timer indicator *OPC: Optical Picture Control (See page 25.) 11 LC-AX3X(E)-a 11 05.11.24, 8:03 AM
Inhaltszusammenfassung zur Seite Nr. 13
Part names TV (Rear) SYSTEM RESET** RESET* INPUT 4 (HDMI) terminals INPUT 1 terminals INPUT 2 terminals INPUT 3 terminals AC INPUT terminal AV OUTPUT terminals Antenna input terminal Headphone jack * Press RESET if the TV cannot return to its original state after performing various operations. This will reset the TV as shown below. • “AV MODE” resets to “USER”. • Still image mode deactivates. • TV channel resets to channel 1. • Teletext mode resets to normal. • Sound volume is initialised. • “Au
Inhaltszusammenfassung zur Seite Nr. 14
Part names Remote control unit 1 m (TELETEXT) Select the TELETEXT mode. (all TV image, all TEXT image, TV/TEXT image) (See pages 39 and 40.) 2 3 (Freeze/Hold) 1 10 Freeze a motion picture on the screen. (See page 17.) TELETEXT mode: Stop updating Teletext pages automatically. Press 3 again to release the hold mode. (See page 39.) 3 POWER (STANDBY/ON) 2 11 To switch the power on and off. (See page 14.) 4 [ (SUBTITLE for TELETEXT) To turn the subtitles on and off. (See page 40.) 12 5 EXIT Turn off
Inhaltszusammenfassung zur Seite Nr. 15
Watching TV Turning on the power Press POWER on the TV. • POWER indicator (Green): The TV is on. (After a few seconds, an image appears with sound.) • After turning the power “ON” by pressing POWER on the TV, you can turn POWER button the power ON/OFF by pressing POWER on the remote control. POWER indicator POWER button Turning off the power Press POWER on the remote control. • The TV enters standby mode and the image on the screen disappears. • The POWER indicator on the TV changes from green t
Inhaltszusammenfassung zur Seite Nr. 16
Watching TV Channel display Simple button operations for Channel display changes approximately after 3 changing channels seconds as shown below. You can change channels in several ways. Using CHr/son the remote control unit SAT.1 • Press CHr to increase the channel number. 12 • Press CHs to decrease the channel number. PAL B/G (Example) SAT.1 12 MONO NOTE • CHr/s on the TV operates the same as r/s on the remote control unit. Using Flashback (A) on the remote control unit Using 0 – 9 on the r
Inhaltszusammenfassung zur Seite Nr. 17
Watching TV In the TV mode of A2 TV broadcasts Using MPX on the remote control When receiving a stereo signal unit Each time you press MPX, the mode switches between STEREO and MONO. Stereo mode BBC2 99 STEREO BBC2 In the NICAM TV broadcasts 99 When receiving a stereo signal MONO Each time you press MPX, the mode switches between NICAM STEREO and MONO. When receiving a bilingual signal Stereo mode Each time you press MPX, the mode switches among BBC2 CH A, CH B and CH AB. 99 Bilingual mode NICAM
Inhaltszusammenfassung zur Seite Nr. 18
Watching TV Simple button operation for changing NOTE volume/sound • Within 30 minutes after pressing e, press one of the buttons below to cancel the mute. —VOLf f f f f/VOLe e e e e —e • Mute will be cancelled after 30 minutes. However, the TV will not suddenly output loud sound as the volume level will be set to 0 automatically. Increase the volume level by pressing VOLk. 2 Press e again within 30 minutes to cancel the mute. • Before 30 minutes, the volume level returns to the previous setting
Inhaltszusammenfassung zur Seite Nr. 19
Basic adjustment settings Menu operation buttons On-Screen Display Use the following buttons on the remote control to Example operate the menu. ... MENU [Option Colour System] Option Audio Only DNR [Off] Input Select [VIDEO] 1 Quick Shoot [On] Colour System [AUTO] 2 Demo 3 4 1 Item displayed in yellow • This indicates the item currently selected. • Press ENTER to go to the adjustment screen for this item. 2 Item in brackets • This indicates the current setting for the item. 3 Item displayed
Inhaltszusammenfassung zur Seite Nr. 20
Basic adjustment settings Menu items List of menu items to help you with operations Picture Setup AV Mode ......................................... Page 25 Auto Installation ............................ Page 20 OPC ................................................ Page 25 Programme Setup .................. Pages 20-24 Backlight ........................................ Page 26 Child Lock ...................................... Page 30 Contrast ......................................... Page 26 Input
