Bedienungsanleitung Edelbrock Performer 70011

Inhaltszusammenfassung zur Seite Nr. 1

Jet Map Information for Performer Nitrous Plates


(For use in kits 70011 and 70012)


Edelbrock engineering has conducted dyno testing with the Performer system to provide jetting maps
for three different jetting levels. These jet combinations are supplied with this system kit to enable
you to vary your engine’s power output. On a typical mildly modified 350 cubic-inch engine, you can
expect the following approximate power gains for each of the three jetting levels:

Square-Flange

Inhaltszusammenfassung zur Seite Nr. 2

§ Fuel Quality Because nitrous oxide is an oxidizer, fuel selection is critical. Both octane and fuel consistency affect fuel burn rate. The oxidizer quality of nitrous oxide will accelerate the burn rate, so we recommend a high quality of gasoline. We also recommend you use the same grade of gasoline every time you use your nitrous oxide system. This will maintain the same fuel burn rate every time. § Engine System Upgrades With all performance modifications, complementary system