Bedienungsanleitung Edelbrock 90 V6 229

Inhaltszusammenfassung zur Seite Nr. 1

PERFORMER-PLUS
CAMSHAFT / LIFTERS / LUBE KIT
CATALOG # 2112
°
MODEL: 90 V6 200/229 c.i.d. only will not fit (4.3L) 262 c.i.d.
• Please study these instructions carefully before you remove your stock camshaft. If you have any questions or problems, do not hesitate to con-
tact our Technical Hotline at: 1-800-416-8628.
� These instructions are designed to give general installation guidelines. A complete step-by-step procedure manual would require many pages. If
you are a novice or just learning

Inhaltszusammenfassung zur Seite Nr. 2

DUE TO THE MANY POSSIBLE SETTINGS OVER THE YEARS, WE camshaft should be torqued carefully and a locking compound ADVISE CHECKING MOTORS, CHILTON, OR FACTORY SERVICE MANU- applied to threads of bolts. Before installing your new Performer-Plus ALS FOR CORRECT SPRING HEIGHT FOR YOUR VEHICLE. camshaft, check the gear drive on the distributor and oil pump for LIFTERS any signs of wear. If worn, be sure to replace with new or you may 1. New lifters must be used with a new camshaft. Use only the lifte

Inhaltszusammenfassung zur Seite Nr. 3

CAMSHAFT: Performer-Plus CAMSHAFT: Performer-Plus CATALOG #: 2112 CATALOG #: 2112 ENGINE: 200-229 c.i.d. Chevrolet 90° V6 ENGINE: 200-229 c.i.d. Chevrolet 90° V6 RPM RANGE: 1500-5500 RPM RANGE: 1500-5500 CAUTION: CAUTION: Use only stock or Edelbrock Sure Seat Valve Springs, #5813 or Use only stock or Edelbrock Sure Seat Valve Springs, #5813 or 5913 (for rotators). 5913 (for rotators). Use stock ratio rocker arms only. Use stock ratio rocker arms only. Duration at 0.006" Lift: Intake 270° Exhaust