Bedienungsanleitung Edelbrock 641550

Inhaltszusammenfassung zur Seite Nr. 1

FORD 5.0L EFI FIREWALL FORWARD RUSSELL
PLUMBING KIT
Catalog #641550
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new complete fuel system kit. If you have any questions, please call
our Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday - Friday, Pacific Standard Time or e-mail us at
Edelbrock@Edelbrock.com.
KIT CONTENTS TOOLS & SUPPLIES RECOMMENDED
❑ 1 Fuel Pressure Regulator Kit #1728
❑ Basic hand tools
❑ 3 3/8” NPT x -6 AN male adap

Inhaltszusammenfassung zur Seite Nr. 2

BEFORE BEGINNING Someone who has a basic knowledge of automobile repair and modification and is familiar with and comfortable with working on their vehicle can accomplish the mechanical installation of this kit using common tools and procedures. However, this kit is designed to allow you to custom fit the fuel lines and components to your application, and will require that you cut hoses to fit and drill holes for fuel pressure regulator mounting, junction blocks, etc. If you do not feel comforta

Inhaltszusammenfassung zur Seite Nr. 3

Fuel pressure regulator install 2. Determine the hose path and length required for the fuel hose leading from the EFI supply fitting to the fuel inlet 1. Find a safe and clean location in the engine compartment fitting located on the passenger side fuel rail. Build and for the placement of the fuel regulator and its mounting install the hose assembly. bracket (supplied). In most applications, the best 3. Determine the hose path and length required for the fuel placement for the regulator is on t

Inhaltszusammenfassung zur Seite Nr. 4

Edelbrock Corporation, 2700 California St., Torrance, CA 90503 Tech Line: 800-416-8628 E-Mail: Edelbrock@Edelbrock.com ©2007 Edelbrock Corporation Catalog #641550 Page 4 of 4 Brochure No. 63-641550 Rev. 10/07 - AJ/mc