Inhaltszusammenfassung zur Seite Nr. 1
LC-13B2UB/LC-15B2UB/LC-20B2UB
MENU
POWER SLEEP
20B2UBCover 02.02.14
LC-13B2UB
LC-15B2UB
LC-20B2UB
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LIQUIDO
SHARP ELECTRONICS CORPORATION
TELEVISOR DE CRISTAL
Sharp Plaza, Mahwah, New Jersey 07430-2135
LÍQUIDO
SHARP CORPORATION
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
Printed in Japan
Imprimé au Japon
Printed on post-consumer recycled paper.
Impreso en Japón
Imprimé sur du papier recyclé.
Impresso
Inhaltszusammenfassung zur Seite Nr. 2
LC-13B2UB LC-15B2UB LC-20B2UB LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow- head symbol, within an equilat- eral triangle, is intended to alert CAUTION the user to the presence of uninsulated “dangerous voltage” RISK OF ELECTRIC SHOCK. within the product’s enclosure DO NOT OPEN. that may be of sufficient magnitude to constitute a risk o
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT INFORMATION WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. U.S.A. ONLY CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. “Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides guidelines
Inhaltszusammenfassung zur Seite Nr. 4
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp LCD Color TV product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precau- tions carefully before using this product. IMPORTANT SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improp
Inhaltszusammenfassung zur Seite Nr. 5
IMPORTANT SAFETY PRECAUTIONS (Continued) Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product
Inhaltszusammenfassung zur Seite Nr. 6
IMPORTANT SAFETY PRECAUTIONS (Continued) If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, Iocation of antenna-discharge unit, connect
Inhaltszusammenfassung zur Seite Nr. 7
CONTENTS Page DEAR SHARP CUSTOMER .............................................................................................................3 IMPORTANT SAFETY PRECAUTIONS .......................................................................................3-5 SUPPLIED ACCESSORIES ............................................................................................................. 7 PREPARATION...........................................................................................
Inhaltszusammenfassung zur Seite Nr. 8
MENU POWER SLEEP SUPPLIED ACCESSORIES Make sure the following accessories are provided with the product. Remote Control “AAA” Size (UM/SUM-4) Dry Battery (×2) RRMCG1664CESB UBATU0038CEZZ Antenna Cable (2m) AC Cord QCNWG0003CEPA QACCD3097CEPA AC Adapter Operation Manual Cable Clamp (×2) LC-13B2UB LC-15B2UB LC-20B2UB LIQUID CRYSTAL TELEVISION TÉLÉVISER ACL TELEVISOR CON PANTALLA DE CRISTAL LIQUIDO TELEVISOR DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D’EMPLOI MANUAL DE MANEJO MANUAL DE OPE
Inhaltszusammenfassung zur Seite Nr. 9
PREPARATION Using the Remote Control Use the remote control by pointing it towards the remote sensor window. Objects between the remote control and sensor window may prevent proper operation. Cautions regarding use of remote control Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity. Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.
Inhaltszusammenfassung zur Seite Nr. 10
PREPARATION (Continued) Power Connection To DC input terminal (DC 12V: LC-13B2UB/LC-15B2UB) (DC 13V: LC-20B2UB) Household power outlet Plug into AC outlet. AC adapter AC cord Note Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet. Always turn the main POWER switch of the LCD TV set to off when connecting the AC adapter. Always unplug the AC adapter from the product and power outlet when not using for a long period of time. Antenna Connec
Inhaltszusammenfassung zur Seite Nr. 11
PREPARATION (Continued) Antenna Connection (Continued) ANTENNAS • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems. F-type connector 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached t
Inhaltszusammenfassung zur Seite Nr. 12
POWER SLEEP FRONT AND REAR CONTROL OPTIONS Main unit (front view) Upper control panel VOL MENU TV/VIDEO MAIN POWER CH LC-20B2UB VOL (–)/(+) MENU MAIN POWER CH ( )/( ) TV/VIDEO LC-13B2UB VOL CH MENU TV/VIDEO MAIN POWER LC-15B2UB Speaker Speaker To change the vertical angle of the LCD TV set, tilt the screen up to 5 degrees forward or 10 degrees backward. The TV set can also be rotated 50 degrees horizontally. Please adjust the angle so that the TV set can be watched most comfortably. SLEEP indica
Inhaltszusammenfassung zur Seite Nr. 13
VIDEO AV-IN1 L AUDIO R S-VIDEO HEAD PHONE ANT. POWER INPUT DC12V FRONT AND REAR CONTROL OPTIONS (Continued) Main unit (rear view) VIDEO AUDIO (L) AV-IN2/OUT AUDIO (R) Y PB PR COMPONENT AUDIO (L) AUDIO (R) VIDEO AUDIO (L) AV-IN1 AUDIO (R) S-VIDEO HEADPHONE Antenna terminal POWER INPUT (DC 12V: LC-13B2UB/ LC-15B2UB) (DC13V: LC-20B2UB) 12 VIDEO AV-IN2/OUT L AUDIO R COMPONENT Y PB PR L AUDIO R VOL CHMENUTV/VIDEO MAIN POWER
Inhaltszusammenfassung zur Seite Nr. 14
FRONT AND REAR CONTROL OPTIONS (Continued) Removing the Back Cover Before connecting a connection cord into the rear terminal, remove the back cover. Push in the tab and pull out the back cover carefully. To mount the cover, insert the 2 hooks on the bottom of the cover into the cabinet and press on the upper part of the back cover until the tab locks in place with a click. Listening with Headphones Plug the headphone mini-plug into the HEADPHONE jack located on the rear of the TV set. O
Inhaltszusammenfassung zur Seite Nr. 15
REMOTE CONTROL POWER POWER DISPLAY 1 DISPLAY* SLEEP BRIGHT SLEEP BRIGHT MENU MENU/ ]/[/ (Cursor control) MUTE TV/VIDEO MUTE TV/VIDEO FLASHBACK VOL CH 2 VOL(+)/(–) FLASHBACK* CH ( )/( ) 1 2 3 4 5 6 Channel Select 7 8 9 3 MTS* MTS 0 100 1 * Displays the receiving channel for 10 seconds. 2 * Returns to the previous channel. 3 * Selects audio settings. 14
Inhaltszusammenfassung zur Seite Nr. 16
BASIC OPERATION This product is factory set to comply with the TV broadcasting system in the United States. For Brazil, Argentina and Uruguay, set the color system according to the country before using this product by following the table below. LC-13B2UB, LC-15B2UB The VIDEO INPUT mode is compatible with color systems worldwide and is automatically set. * The World Multi Auto System Factory setting of color system User setting is compatible with all color TV broadcasting Country systems indica
Inhaltszusammenfassung zur Seite Nr. 17
POWER SLEEP BASIC OPERATION (Continued) Turning on POWER 1 Press MAIN POWER, located on On-screen display MAIN POWER the upper side of the main unit, to 2 on. 2 The POWER indicator instantane- ously changes from red to green and the main unit is turned on. STEREO
Inhaltszusammenfassung zur Seite Nr. 18
BASIC OPERATION (Continued) Sound Volume 1 Press VOL (+) to increase the sound POWER volume. The segment of the indicator increases. DISPLAY VOLUME SLEEP BRIGHT 50 MENU 2 Press VOL (–) to decrease the sound MUTE TV/VIDEO volume. The segment of the indicator decreases. FLASHBACK VOLUME VOL CH MUTE 10 To mute the sound 1 2 3 VOL 4 5 6 1 Press MUTE to temporarily turn off (+)/(–) 7 8 9 the sound. MTS 0 100 The MUTE mark is displayed for MTS 4 seconds. 2 Press MUTE or VOL (+)/(–) to turn the sound
Inhaltszusammenfassung zur Seite Nr. 19
BASIC OPERATION (Continued) Changing the Channels Changing channels by using Channel Select on the remote control • This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2- or 3-digit number. To select a 1- or 2-digit channel POWER 0– number (e.g., Channel 5): DISPLAY Complete the following procedure SLEEP BRIGHT 5 within 4 seconds. MENU 1 Press the button. MUTE TV/VIDEO 2 Press the 5 button. FLASHBACK VOL CH Note When selecting a 1-digit channel num
Inhaltszusammenfassung zur Seite Nr. 20
SELECTING MENU ITEMS Selecting Menu Items • This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired menu item by following the steps below and then refer to the indicated page for details. (Page 20) 1 Press MENU to display the MENU POWER SLEEP TIMER RETURN screen. SLEEP TIMER [ ––– REMAIN] DISPLAY SLEEP BRIGHT 2 Press ]/[ to select the desired menu item. MENU 3 Press to enter. MUTE TV/VIDEO MENU/ FLASHBACK SELECT : ADJUST : EXIT: MENU 4 Press MENU
