Inhaltszusammenfassung zur Seite Nr. 1
LC-60E88UN OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN
LC-60E88UN
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
SHARP CORPORATION
Printed in Mexico
Imprimé au Mexique
Impreso en México
TINS-E580WJZZ
10P03-MX-NM
IMPORTANT : Please read this operation manual before starting operating the equipment.
IMPORTANT : Veuillez lire ce mode
Inhaltszusammenfassung zur Seite Nr. 2
Dimensional Drawings Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) 21 24 /32 (626) 5 45 5 / 4 / 16 64 5 56 / (1438) (135) (119) 8 17 52 /32 (1334) 9 17 / (446) 16 3 15 /4 (400) AN-52AG4 45 41 4 /64 2 /64 (119) (67) 21 7 /64 (186) 3 29 15 /4 (400) 37 /64 (951) 15 9 3 /32 2 /32 11 35 / (893) (88) (58) 64 5 29 /8 (752) 41 20 /64 (524)
Inhaltszusammenfassung zur Seite Nr. 3
LC-60E88UN LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The Serial No.: numbers are located at the rear of the TV. IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol, within an equilateral triangle, CAUTION is intended to alert the user
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT INFORMATION WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connection
Inhaltszusammenfassung zur Seite Nr. 5
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safet
Inhaltszusammenfassung zur Seite Nr. 6
IMPORTANT SAFETY INSTRUCTIONS EXAMPLE OF ANTENNA GROUNDING AS PER � Outdoor Antenna Grounding — If an outside antenna is NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against ANTENNA voltage surges and built-up static charges. LEAD IN WIRE Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the GROUND mast and supporting s
Inhaltszusammenfassung zur Seite Nr. 7
IMPORTANT SAFETY INSTRUCTIONS Caring for the Liquid Crystal panel � Turn off the main power and unplug the AC cord from the wall outlet before handling. � Gently wipe the surface of the display panel with a soft cloth (cotton, fl annel, etc.). To protect the display panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/ dry sheet type cloth, etc.). This may damage the surface of the display panel. � Wiping with a hard cloth or using strong force may scratch the surface of th
Inhaltszusammenfassung zur Seite Nr. 8
Contents IMPORTANT INFORMATION ..................... 1 AUDIO ..................................... 18 POWER SAVING ........................... 19 Trademarks ....................................... 2 Closed Captions and Digital Closed Captions ... 19 DEAR SHARP CUSTOMER ....................... 3 VIEW MODE ............................... 20 IMPORTANT SAFETY INSTRUCTIONS ........ 3-5 On-Screen Display Menu Supplied Accessories ............................ 6 On-Screen Display Menu Operation ........
Inhaltszusammenfassung zur Seite Nr. 9
QUICK REFERENCE QUICK INSTALLATION TIPS Using the Remote Control Unit Use the remote control unit by pointing it towards the 1 Attach your antenna to the back of the television. remote control sensor on the TV. Objects between the (See page 8.) remote control unit and the remote control sensor may Connect the AC plug for the television into the AC 2 prevent proper operation. outlet. 17´ (5 m) 30º Remote control sensor 30º 30º AC outlet � Place the TV close to the AC outlet, and keep the po
Inhaltszusammenfassung zur Seite Nr. 10
Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. F-type connector 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially 75-ohm coaxial cable (round)
Inhaltszusammenfassung zur Seite Nr. 11
Part Names TV (Front) Remote control sensor OPC sensor* (See page 23.) OPC indicator (See page 23.) POWER indicator (See page 16.) * OPC: Optical Picture Control TV (Rear/Side) *2 AC INPUT terminal POWER button *3 MENU button INPUT button *1 INPUT 7 terminal Channel (HDMI) buttons INPUT 8 terminal (CH / ) (HDMI) DIGITAL AUDIO OUTPUT terminal Volume AUDIO OUTPUT buttons terminals (VOL / ) kl Antenna/Cable in *1 INPUT 5 terminal (HDMI) INPUT 1 terminals INPUT 3 terminals INPUT 2 terminals R
Inhaltszusammenfassung zur Seite Nr. 12
Part Names 1 TV POWER: Switch the TV power on or enter standby. (See page Remote Control Unit 16.) 2 DISPLAY: Display the channel information. 117 3 SOURCE POWER: Turns the power of the external equipment on and off. 4 External equipment operational buttons: Operate the external equipment. 5 0–9: Set the channel. (See page 17.) 6 • (DOT): (See pages 17 and 34.) 2 7 INPUT: Select a TV input source. (TV, INPUT 1, INPUT 2, INPUT 18 3 3, INPUT 4, INPUT 5, INPUT 6, INPUT 7, INPUT 8) (See pages 11
Inhaltszusammenfassung zur Seite Nr. 13
Introduction to Connections Experiencing HD Images An HDTV without an HD source is just an ordinary TV. To enjoy HD images on the TV, you should get HD programming from the following: � Over-the-air broadcasting via HD quality antenna � HD cable/satellite subscription � HD compatible external equipment � For information on updating to HD programming, ask your cable/satellite service provider. Types of Connection Image quality differs depending on the terminal used. To enjoy clearer images, check
Inhaltszusammenfassung zur Seite Nr. 14
Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 11 and 17.) For connecting the TV to external equipment, use commercially available cables. CAUTION � To protect equipment, always turn off the TV before connecting any external equipment. � Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making c
Inhaltszusammenfassung zur Seite Nr. 15
Connecting to External Equipment When using Component cable (INPUT 1 or 2): ■ � Blu-ray disc player � DVD player Rear of the TV � HD cable/satellite set-top box Audio cable COMPONENT OUT AUDIO-L (White) AUDIO-R (Red) Y (Green) Component video cable PB (Blue) PR (Red) � To enjoy 1080p display capability, connect your external equipment using an HDMI-certifi ed cable or a component cable and set the equipment to 1080p output. � See page 12 for connecting a Blu-ray disc player, DVD player or an
Inhaltszusammenfassung zur Seite Nr. 16
Connecting to External Equipment Connecting an Audio Amplifi er ■ When using optical fi ber cable: It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 32 for details.) PCM audio outputs from the terminal. Rear of the TV Optical fi ber cable OPTICAL DIGITAL AUDIO INPUT � Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/
Inhaltszusammenfassung zur Seite Nr. 17
Connecting to External Equipment Connecting a PC Refer to page 41 for a list of PC signals compatible with the TV. ■ When using HDMI cable (INPUT 5, 6, 7 or 8): Side panel Rear of the TV HDMI-certifi ed cable HDMI OUT � Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable to the INPUT 6 (HDMI) terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO terminal and set "PC Audio Select" to "Input 6 (HDMI)". (See page 41.)
Inhaltszusammenfassung zur Seite Nr. 18
Watching TV Turning On/Off the Power Press POWER on the TV, or TV POWER on the remote control unit to turn the power on. � POWER indicator (Green): The TV is on. POWER � The Initial Installation starts when the TV powers on for the fi rst time. If the TV has been turned on before, the Initial Installation will not be invoked. For changing the settings of the Initial Installation, perform "EZ setup" on the Setup menu on page 26. Press POWER on the TV, or TV POWER on the remote control unit a
Inhaltszusammenfassung zur Seite Nr. 19
Direct Button Operation Sleep Timer Allows you to set a time when the TV automatically switches to standby. Press SLEEP. � The remaining time displays when the sleep timer has been set. � Each time you press SLEEP, the remaining time switches as shown below. Off 30 60 90 120 � When set, the time automatically starts counting down. � If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting. � When it is 5 minutes before the time expires
Inhaltszusammenfassung zur Seite Nr. 20
Direct Button Operation AV MODE AUDIO AV MODE gives you several viewing options to choose MTS/SAP stereo mode ■ from to best match the surrounding environment of the The TV has a feature that allows reception of sound TV, which can vary due to factors like room brightness, other than the main audio for the program. This feature type of program watched or the type of image input is called Multi-channel Television Sound (MTS). The TV from external equipment. with MTS can receive mono sound, st
