Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A CAUTION RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. RISK OF ELECTRIC SHOCK DO NOT OPEN! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SER- MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS VICE PERSONNEL. UNIT. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOC
Inhaltszusammenfassung zur Seite Nr. 3
PC RESOLUTION CHART FCC INFORMATION __________ This equipment has been tested and found to comply with the lim- its for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi- cations
Inhaltszusammenfassung zur Seite Nr. 4
CONTENTS Please read before IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . 2 operating your HDTV! FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 TRADEMARKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 PC RESOLUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 PROTECTING THE LCD SCREEN CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 SPECIFICATIONS . . . . . .
Inhaltszusammenfassung zur Seite Nr. 5
STAND ASSEMBLY ___________ GETTING STARTED NOTE: Skip these steps if you are wall mounting the TV. BATTERY INSTALLATION Place HDTV face down on a padded or cushioned Install two (2) “AA” batteries in the remote control. 1 flat surface to protect the screen and finish. (Not included) Carefully insert the stand base to the bottom of the To ensure safe operation, please observe 2 HDTV and secure the base by inserting 4 screws as the following precautions: indicated in the diagram below. NOTE: Stand
Inhaltszusammenfassung zur Seite Nr. 6
GETTING STARTED HDTV INPUT/OUTPUT REFERENCE HDTV BACK PANEL 1 USB Input 1 View pictures or video files stored in a USB flash drive. 2 ETHERNET port 2 Hook up your HDTV to the internet with the use of an appro- priate ethernet cable and a correct internet setup. NOTE: Please refer to the Internet Ready HDTV Guide for the proper connection methods. 3 HDMI (INPUT1, INPUT2, & INPUT3) 3 An all digital Audio/Video interface that can accept uncom- pressed video signals up to 1080p for the very best pi
Inhaltszusammenfassung zur Seite Nr. 7
GETTING STARTED AUDIO / VIDEO CONNECTIONS USB input jack is used to connect a USBmass storage device (not included) to display digital images or video files on your HDTV. USB FLASH HDMI (DVI) INPUT1 can be used to DRIVE hookup a DVI device with the use of an appropriate DVI to HDMI cable or adapter. (AUDIO DVI jack needs to be hooked up to SATELLITE RECEIVER the DVI device as well.) (or similar device) NOTE: HDMI INPUT1 may also be used to hookup any digital device with an HDMI output, without
Inhaltszusammenfassung zur Seite Nr. 8
REMOTE CONTROL OPERATION Selects the video source to view. Turns your HDTV On or Off. Pressing it twice restores your HDTV to its factory settings. All user customized Switch viewing mode between 2D and 3D. settings will be cleared. Cycles through the available aspect Cycles through the available Caption ratios. The different settings either modes (when available.) stretch, zoom, or fill the image on your screen. Bars may appear on top and bot- tom of your screen (or on left and right Select cha
Inhaltszusammenfassung zur Seite Nr. 9
ON-SCREEN MENU OPERATION GETTING STARTED INPUTS ___________________________ INITIAL CHANNEL SEARCH Display the On Screen menu and use the CURSOR keys to select Inputs. Press ENTER. Before proceeding, please make sure to hook up Inputs allows the direct selection of any AV input and your antenna or cable connection and all AV the removal of unused inputs from the AV input loop. equipment correctly to your HDTV. Use the CURSOR keys to select the desired AV input 1. PLUG IN AC POWER CORD and
Inhaltszusammenfassung zur Seite Nr. 10
ON-SCREEN MENU OPERATION No Signal Shut-Off SETUP (CONTINUED) __________________ When No Signal Shut-off feature is set to ON, it will allow the HDTV to automatically turn off when no Clock timer video and/or audio signals are being received. This feature allows you to set a Current Time for your NOTES: By factory default, this feature is set to ON. HDTV and enable a Switch On Time for the HDTV to TV will automatically turn off if no AV signals turn on at a specific time of day. are received in
Inhaltszusammenfassung zur Seite Nr. 11
ON-SCREEN MENU OPERATION CHANNEL _________________________ For V-Chip (Movie) ratings select Movie and press ENTER, and then select the desired MPAA rating limit. Display the On Screen menu and use the CURSOR Press the EXIT key to close the V-Chip menu. keys to select Channel. Press ENTER. Channel Search Auto – Search the detected mode, Cable or Air. Cable – Search for analog and unscrambled (ClearQAM) digital cable channels. Air (Antenna) – Search for analog and digital off-air channels. Di
Inhaltszusammenfassung zur Seite Nr. 12
ON-SCREEN MENU OPERATION PICTURE _________________________ ADDITIONAL PICTURE OPTIONS: Display the On Screen menu and use the CURSOR Select Picture Options to access power consumption keys to select Picture. Press ENTER. reduction features such as ECO and Light Sensor, as well as horizontal and vertical stretch parameters. You may choose a Picture Mode between Standard, Vivid, Theater, and Stadium which have predetermined ECO (ENERGY SAVER) picture parameter values, or choose the Custom optio
Inhaltszusammenfassung zur Seite Nr. 13
UNDERSTANDING PIX-SIZE ON-SCREEN MENU OPERATION NOTE: Images on left are for a 4:3 transmission while SOUND __________________________ images on right are for a 16:9 transmission. Display the On Screen menu and use the CURSOR Pix1Shows a standard definition 4:3 image in its keys to select Sound. Press ENTER. original format, a 16:9 wide image is slightly You may choose a Sound Mode between Standard, Vivid, compressed horizontally. Theater, and Clear Voice which have predetermined audio param
Inhaltszusammenfassung zur Seite Nr. 14
ON-SCREEN MENU OPERATION 3D MODE ADJUSTMENTS 3D _______________________________ Display the On Screen menu and use the CURSOR keys to select 3D. Press ENTER. Your Sanyo HDTV can display 3D images from a 3D transmission or source, as well as from a 2D source, Use the following adjustments to fine tune your 3D thanks to its 2D-3D technology watching experience: NOTE: A 3D transmission (or source) may also be dis- Left / Right Swap – Enable Swap if an unusual sense of played in 2D. depth is perc
Inhaltszusammenfassung zur Seite Nr. 15
MEDIA APPS_______________________ Enjoy viewing pictures and video files on your HDTV with the use of a USB mass storage device hooked up to the HDTV’s USB input. ACCESSING THE MEDIA APPS Display the On Screen menu and use the CURSOR keys to select Media Apps. Press ENTER. NOTE:When a USB flash drive is connected to the HDTV, the Photo option is automatically selected. USING THE PHOTO VIEWER FEATURE USING THE MOVIE VIEWER FEATURE Select the Photo option and press ENTER. Select the Movie optio
Inhaltszusammenfassung zur Seite Nr. 16
PC INPUT Use your HDTV as a computer monitor by hooking up PC Setting your PC or Laptop to the TV with the use of an appropri- Auto Adjustment – Automatically adjusts display posi- ate monitor cable (not included.) tion, dot clock and phase. Before connecting any cables, disconnect the AC Dot Clock – Adjust the Dot frequency to match your power cords of both the HDTV and PC from the computer’s Dot frequency. AC outlets. Phase – Adjust this parameter when the picture appears Power on the HDTV and
Inhaltszusammenfassung zur Seite Nr. 17
NOTES Need help? www.sanyoctv.com 1-800-877-5032 17
Inhaltszusammenfassung zur Seite Nr. 18
ONE-YEAR LIMITED PARTS AND LABOR WARRANTY THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES. WARRANTY APPLICATION FOR ONE YEAR from the date of original retail purchase Sanyo Manufacturing Corporation
Inhaltszusammenfassung zur Seite Nr. 19
This product incorporates the following software: When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are 1. the software developed independently by or for designed to make sure that you have the freedom to dis- Sanyo Electric Co.,Ltd., tribute copies of free software (and charge for this ser- 2. the software owned by third party and licensed to vice if you wish), that you receive source code or can get Sanyo Electric Co.,Ltd., it if you want it, t
Inhaltszusammenfassung zur Seite Nr. 20
GNU GENERAL PUBLIC LICENSE else, saying that you provide a warranty) and that users may redistribute the program under these TERMS AND CONDITIONS FOR COPYING, conditions, and telling the user how to view a copy DISTRIBUTION AND MODIFICATION of this License. (Exception: if the Program itself is interactive but does not normally print such an 0. This License applies to any program or other work announcement, your work based on the Program which contains a notice placed by the copyright holder is
