Inhaltszusammenfassung zur Seite Nr. 1
Owner’s Instructions
HPN5039/HPN6339
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
TEL : 1-800-SAMSUNG (1-800-726-7864)
www.samsungusa.com
BN68-00476A-00
Inhaltszusammenfassung zur Seite Nr. 2
Warning! Important Safety Instructions Thank You for Choosing Samsung Thank you for choosing Samsung! Your new Samsung product represents the latest in television technology. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
Inhaltszusammenfassung zur Seite Nr. 3
FCC Information • Protect the power cord. Power supply cords should be routed so that they won’t be walked on or pinched User Instructions Warning by objects placed on or against them. Pay particular attention to cords at plugs, convenience recepta- The Federal Communications Commission Radio User must use shielded signal interface cables to cles, and the point where they exit from the unit. Frequency Interference Statement includes the fol- maintain FCC compliance for the product. lowing warnin
Inhaltszusammenfassung zur Seite Nr. 4
Important Warranty Information Table of Contents Regarding Television Format Viewing Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily General Information Channel Control designed to view wide screen format full-motion video.The images displayed on them should primarily be Your New Plasma Display Panel ....................10 Fine Tuning Channels ..................................62 in the wide screen 16:9 ratio format,or expanded to fill the scre
Inhaltszusammenfassung zur Seite Nr. 5
PLASMA DISPLA Y P ANEL General Information Your New Plasma Display Panel ....................................................10 Remote Control Buttons ................................................................12 Wall Installation Instructions ..........................................................14
Inhaltszusammenfassung zur Seite Nr. 6
Your New Plasma Display Panel Front Panel Rear Panel HPN5039 ŒService jack ØComponent Video/Audio Input jacks For service only. (Y/Pb/Pr/Audio L/Audio R) Connect to the audio and component output ´DVI Input jacks jacks of a DVD player or Set-Top Box. Receives the digital video/audio signals from a set top box or PC. ∏External Speaker Out jacks Connect external speakers. ˇPC(RGB) Input jacks(15pin) HPN6339 Connect to the video/audio output jacks ”Antenna jack on your PC. Connect to antenna. ¨S
Inhaltszusammenfassung zur Seite Nr. 7
Remote Control Buttons ¸SURROUND button Press the hear the Dolby surround effect. ˛ MTS button Press to choose stereo, mono or Separate Audio Pro- Remote Control gram (SAP broadcast). ◊AUTO PROG. button The TV automatically cycles through all of the avail- ŒPOWER button able channels and stores them in memory. Turns the PDP on and off. ±ADD/DEL button ´ASPECT button Press to add or delete channels in the TV’s memory. Press to change the screen size. ≠DNIe button ˇNumber buttons Activates DNIe (
Inhaltszusammenfassung zur Seite Nr. 8
Wall Installation Instructions Installation Notes Fixing the PDP panel to the wall attachment panel bracket Remove the screws on the rear of the PDP panel. Do not install the PDP in any location other than a vertical wall. 1 1 To protect the performance of the PDP and prevent problems, avoid the following HPN5039 HPN6339 places. 2 • Do not install next to smoke and fire detectors. • Do not install in an area subjected to vibration. • Do not install in an area subjected to high voltage. • Do n
Inhaltszusammenfassung zur Seite Nr. 9
How to Adjust Mounting Angle Put the 4 pegs on the PDP in the grooves of the wall mount bracket and pull down on the PDP (Œ) to secure it to the wall mount bracket. (´) Tighten the screws as shown Notice Notice : Please secure the mounting bracket on the wall surface after setting its angle at 0° 4 (ˇ) so that the PDP cannot be separated from wall mount bracket. Factory default HPN5039 HPN5039 HPN6339 PDP panel Wall Wall attachment panel bracket The wall mount bracket is delivered separately.P
Inhaltszusammenfassung zur Seite Nr. 10
PLASMA DISPLA Y P ANEL Connections Connecting VHF and UHF Antennas ..............................................20 Connecting Cable TV....................................................................20 Connecting Speakers....................................................................22 Connecting a VCR........................................................................24 Connecting a Camcorder ..............................................................25 Connecting a DVD Player..
Inhaltszusammenfassung zur Seite Nr. 11
Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial If your antenna looks like this: it has 75-ohm round leads. cables (which you can buy from your Samsung dealer or any electronics store). Find and disconnect the cable that is con- Plug the antenna lead into the VHF/UHF terminal nected to the ANTENNA IN terminal of
Inhaltszusammenfassung zur Seite Nr. 12
Connecting Speakers External speakers are sold seperately. Check with your dealer. HPN5039 Connecting PDP and Speakers Speaker Audio Cable Speaker Audio Cable HPN5039 Fix the bracket onto the guide pole located on the rear of speaker and fasten the screws. 1 After removing the four screws on the rear of PDP. 2 As shown in figure, insert the loop on a speaker into the groove on the PDP. 3 Clamp the speaker and the PDP together and fasten the screws. 4 Powered Subwoofer (Option) External speaker
Inhaltszusammenfassung zur Seite Nr. 13
Connecting a VCR Connecting a Camcorder Connecting a VCR to the Video or S-Video/Audio jack Viewing camcorder tapes PDP VCR Camcorder PDP Power Plug Audio Cable Power Plug Ferrite Cores(HPN5039) S-Video Cable Video Cable Video Cable Audio Cable Ferrite Cores(HPN5039) How to Connect Connect the Video/Audio cables between the AUDIO(L/R)/VIDEO jacks on the PDP and AUDIO/VIDEO OUT jacks on the VCR. (Note: For better video, you can use an S-Video cable.) How to Connect Videotape Playback: 1. Turn on
Inhaltszusammenfassung zur Seite Nr. 14
Connecting a DVD Player (480i, 480p) Connecting a DTV Receiver This PDP displays the optimum picture in 720p mode. (480p, 720p, 1080i) This PDP displays the optimum picture in 720p mode. Playing DVD Watching DTV PDP DVD Player PDP DTV Receiver Power Plug Power Plug Video Cable Video Cable or Audio Cable Audio Cable DVI Cable Ferrite Cores(HPN5039) Use the DVI-D connection cable. (sold separately) How to Connect How to Connect Connect a Video Cable between the Y, Pb, Pr (COMPONENT1, 2) input jac
Inhaltszusammenfassung zur Seite Nr. 15
PLASMA DISPLA Y P ANEL Operation Turning the PDP On and Off ..........................................................30 Memorizing the Channels..............................................................32 Setting Up Your Remote Control ....................................................37
Inhaltszusammenfassung zur Seite Nr. 16
Turning the PDP On and Off Displaying Status Information Turning the PDP On and Off Press the INFO button on the remote control. The PDP will Ant 6 Press the Power button on the remote control. display the Picture mode, Sound mode, MTS, Signal and The PDP will be turned on and you will be ready to use it’s Caption. features. Press the INFO button on the remote control again. Picture : Custom Sound : Custom You can also use the POWER( ) button on the front of the The PDP will display the Clock.
Inhaltszusammenfassung zur Seite Nr. 17
Memorizing the Channels Your PDP can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual). Storing Channels in Memory (Auto
Inhaltszusammenfassung zur Seite Nr. 18
Adding and Erasing Channels (Manual Method) To View Memorized Channel (PIP Mode) Use the number buttons to directly select the channel that Press the MENU button. Press the UP or DOWN Channel Ant 4 will be added or erased. button to select “Channel”, then press the ENTER 1 1 Ant/ CATV Ant button. Auto Program Fine Tune 0 Ex) Channel “4” LNA Off Ch. Scan Move Select Menu Press the ADD/DEL button: Press the UP or DOWN button to select “Ch Scan”, Channel Repeatedly pre
Inhaltszusammenfassung zur Seite Nr. 19
Setting Up Your Remote Control This PDP's remote control can operate almost any VCR, cable box or DVD. After it has been set up properly, your remote control can operate in four different modes :TV, VCR, Cable or DVD. Changing Channels Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. Using the Channel Buttons Note : The remote control may not be compatible with all DVD Players, VCRs, Cable boxe
Inhaltszusammenfassung zur Seite Nr. 20
Remote Control Codes VCR Codes PLASMA DISPLA Y P ANEL Cable Box Codes Picture Control Customizing the Picture ................................................................40 Using Automatic Picture Settings ....................................................41 Selecting the Color Tone................................................................42 DNIe (Digital Natural Image engine) ............................................43 Viewing the Picture-in-Picture...............................
