Inhaltszusammenfassung zur Seite Nr. 1
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comment contacter Samsung dans le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service
Consommateurs Samsung.
Country Customer Care Center Web Site Address
Samsung Electronics America, Inc. 105 Challenger Road
U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us
Ridgefield Park, NJ 07660-05
Inhaltszusammenfassung zur Seite Nr. 2
Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on none
Inhaltszusammenfassung zur Seite Nr. 3
User Instructions Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 24 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image. Altitude The PDP can only operate normally at heights under 6500ft. Heat on the top of the P
Inhaltszusammenfassung zur Seite Nr. 4
Contents Connecting and Preparing Your TV Picture Control ■ List of Features ..........................................................................5 ■ Changing the Picture Settings .................................................22 ■ Checking Parts ..........................................................................5 Sound Control ■ Assembling the Cables ..............................................................5 ■ Viewing the Control Panel ........................................
Inhaltszusammenfassung zur Seite Nr. 5
Connecting and Preparing Your TV List of Features • Adjustable picture settings that can be stored in the TV’s memory. • Automatic timer to turn the TV on and off. • A special sleep timer. • V-Chip function. • Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top Box) needed. • SRS TruSurround HD provides a virtual surround system. Checking Parts Please make sure the following item
Inhaltszusammenfassung zur Seite Nr. 6
Viewing the Control Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. N The product color and shape may vary depending on the model. N If you touch the front panel button, the each button will be operated. 1 SOURCE E Toggles between all the available input sources (TV, AV, Component1, Conponent2, HDMI1, HDMI2/DVI, HDMI3). E In the on-screen menu, use this button as y
Inhaltszusammenfassung zur Seite Nr. 7
Viewing the Connection Panel Use the connection panel jacks to connect A/V components that will be connected continuously, such as Blu-Ray DVD Players or a VCR. N The product color and shape may vary depending on the model. TV Rear Panel 1 POWER IN 6 ANT IN Connects the supplied power cord. Uses a 75Ω Coaxial connector for an Air/Cable Network. 2 SERVICE 7 DIGITAL AUDIO OUT (OPTICAL) Used for service only. Connects to a Digital Audio component. 3 AUDIO OUT 8 COMPONENT IN 1, / AV IN 1 C
Inhaltszusammenfassung zur Seite Nr. 8
Remote Control You can use the remote control up to a distance of about feet from the TV. N The product color and shape may vary depending on the model. N The performance of the remote control may be affected by bright light. 1 POWER $ Use these buttons in the DMA, Anynet+ Turns the TV on and off. modes. ( : This remote can be used to control recording on Samsung recorders 2 NUMERIC BUTTONS with the Anynet+ feature) Press to change the channel. % TV 3 Selects the TV mode directly. Pres
Inhaltszusammenfassung zur Seite Nr. 9
Connections Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “ Antennaswith300ΩFlatT win Leads” below. Ifyourantennahasoneleadthatlookslikethis,see“Antennaswith75ΩR ound Leads.” If you have two antennas, see “Separate VHF and UHF Antennas.” ❑ Antennas with300ΩFlatT winLeads Ifyouareusinganoff-airantenna(suchasaroofantennaorrabbitears)tha thas300Ω twin flat leads, follow the directions below. 1. Plac
Inhaltszusammenfassung zur Seite Nr. 10
❑ Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.) 1. Find and disconnect the cable that is connected to the ANT IN terminal on your ANT IN cable box. N This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”. . Connect th
Inhaltszusammenfassung zur Seite Nr. 11
Connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture. 1. Connect an HDMI Cable between the HDMI IN (1, 2(DVI), or 3) jack on the TV and the HDMI jack on the DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box). TV Rear Panel DVD/Blu-Ray Player or Cable Box / Satellite receiver 1 HDMI Cable (Not
Inhaltszusammenfassung zur Seite Nr. 12
Connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD/Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) to your TV. 1. Connect Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD / Blu-Ray Player or Cable Box / Satellite receiver(Set-Top Box). . Connect Audio Cables between the COMPONENT IN (1 or
Inhaltszusammenfassung zur Seite Nr. 13
❑ Using an HDMI Cable 1. Connect an HDMI Cable between the HDMI IN (1, 2(DVI), or 3) jack on the TV and the HDMI jack on the camcorder. TV Rear Panel Camcorder 1 HDMI Cable (Not supplied) N Each Camcorder has a different back panel configuration. Connecting a VCR ❑ Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable s
Inhaltszusammenfassung zur Seite Nr. 14
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System(Home theater/Receiver) to your TV. 1. Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jacks on the TV and the Digital Audio Input (OPTICAL) jacks on the Digital Audio System. When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack : Decrease the volume of the TV, and adjust the volume level with the system’s volume control. TV Rear Panel Dig
Inhaltszusammenfassung zur Seite Nr. 15
Connecting a PC ❑ Using an HDMI/DVI Cable 1. Connect an HDMI/DVI cable between the HDMI IN 2(DVI) jack on the TV and the PC output jack on your computer. . Connect a 3.5 mm Stereo plug to 2RCA cable between the DVI AUDIO IN [R-AUDIO-L] jack on the TV and the Audio Out jack of the sound card on your computer. TV Rear Panel PC .5 mm Stereo plug to RCA Cable (Not supplied) 1 HDMI/DVI Cable (Not supplied) N Each PC has a different back panel configuration. N When connecting a PC, match the c
Inhaltszusammenfassung zur Seite Nr. 16
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. N It may take a while for your TV to power on. Changing Channels ❑ Using the Channel Buttons Press the CH or CH button to change channels. N When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels t
Inhaltszusammenfassung zur Seite Nr. 17
Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily. The Tools menu changes depending on which external input mode you are viewing. 1. Press the TOOLS button. The Tools menu will appear. E . Press the ▲/▼ button to select a menu, then press the ENTER button. E . Press the ▲/▼/◄/►/ ENTER buttons to display, change, or use the selected items. For a more detailed description of each function, refer to the corresp
Inhaltszusammenfassung zur Seite Nr. 18
Picture Picture Picture Viewing the Menus Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions. 1. Press the MENU button. The main menu is displayed on the screen. Its left side has the following icons: Picture, Sound, Channel , Setup, Input, Application, Support. . Press the ▲ or ▼ button to select one of the icons. Press the ◄ or ► button to access the icon’s sub-menu. . Press the ▲ or ▼ button to move to items
Inhaltszusammenfassung zur Seite Nr. 19
Setup Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently. N The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running. N The Screen Saver is activated if there is no operating signal for longer than 15 minutes. 1. Press the POWER button on the remote control. Plug & Play The message Menu Language, Store Demo, Channels, and Time will be set. is displayed. Menu Language,
Inhaltszusammenfassung zur Seite Nr. 20
Channel Channel Control Storing Channels ❑ Antenna→ Air/Cable Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system). ► Antenna : Air T Press the TOOLS button to display Tools menu. You can also switch the antenna by selecting Tools → Switch to Cable (or Air) Auto Program Clear Scrambled Channel ❑ Auto Program Channel List • Air: Air antenna signal. Fine Tune • Cable: Cable
