Inhaltszusammenfassung zur Seite Nr. 1
LFD DISPLAY
User Manual
UD46C-B
The color and the appearance may differ depending on the
product, and the specifications are subject to change without
prior notice to improve the performance.
BN46-00331A-01
Inhaltszusammenfassung zur Seite Nr. 2
Table of contents Installing the Wall Mount Kit 27 Connecting to an Audio System 52 Before Using the Product Wall Mount Kit Specifications (VESA) 28 Connecting the network box (Sold separately) 53 Copyright 5 Remote Control 29 MagicInfo 53 Safety Precautions 6 Cable Connection 29 Symbols 6 Connection 32 Control Codes 33 Cleaning 6 Input Storage 7 Electricity and Safety 7 Source List 56 Installation 8 Operation 10 Connecting and Using a Source PIP 57 Precautions when handling the panel 13 Device
Inhaltszusammenfassung zur Seite Nr. 3
Table of contents Color Temp. 66 Film Mode 75 Menu Transparency 84 Image Lock 66 PIP Picture 76 Safety Lock 84 Change PIN 84 Auto Adjustment 67 Dynamic Contrast 76 Lock 84 Signal Balance 67 Lamp Control 77 Energy Saving 85 Signal Balance 67 Picture Reset 77 Signal Control 67 Video Wall 85 Video Wall 85 Size 68 Format 86 Horizontal 86 HDMI Black Level 68 Sound Vertical 87 PIP Picture 69 Screen Position 87 Mode 78 Dynamic Contrast 69 Safety Screen 88 Custom 79 Pixel Shift 88 Lamp Control 70 Auto V
Inhaltszusammenfassung zur Seite Nr. 4
Table of contents OSD Display 96 Schedule Management 132 Correct Disposal 157 Software Upgrade 97 Troubleshooting Guide 134 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 157 Setup Reset 98 Correct disposal of batteries in this product 157 Optimum Picture Quality 158 Reset All 98 Prevention of Afterimage Burn-in 159 Troubleshooting Guide License 161 Requirements Before Contacting Samsung Customer Service Center 136 Using MDC Terminology 162 Testing the Product 136 C
Inhaltszusammenfassung zur Seite Nr. 5
Chapter 01 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. ⓒ 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association. Ow
Inhaltszusammenfassung zur Seite Nr. 6
Cleaning Safety Precautions ― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ― Take the following steps when cleaning. Caution ― The following images are for reference only. Real-life situations may differ from what is shown in the images. RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) Power off the product and computer. 1 THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SER
Inhaltszusammenfassung zur Seite Nr. 7
Connect the power plug to a grounded power socket (type 1 insulated Storage devices only). • An electric shock or injury may result. High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ! ― Contact Customer Service Center if the inside of the product needs cleaning (service fee will be Do not bend or pull the power cord with force. Be careful not to leave the charged). power cord under a heavy object. • Damage to the cord may result in
Inhaltszusammenfassung zur Seite Nr. 8
Caution Installation Do not disconnect the power cord while the product is being used. Warning • The product may become damaged by an electric shock. DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • A fire may result. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • A fire or electric shock may result. Have a technician install the wall-mount hanger. ! • I
Inhaltszusammenfassung zur Seite Nr. 9
Do not install the product on an unstable or vibrating surface (insecure shelf, Caution sloped surface, etc.) • The product may fall and become damaged and/or cause an injury. Do not drop the product while moving. • Using the product in an area with excess vibration may damage the • Product failure or personal injury may result. product or cause a fire. ! Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. Do not set down the product
Inhaltszusammenfassung zur Seite Nr. 10
Do not leave heavy objects or items that children like (toys, sweets, etc.) on Operation top of the product. • The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury. Warning There is a high voltage inside the product. Never disassemble, repair or During a lightning or thunderstorm, power off the product and remove the modify the product yourself. power cable. • A fire or electric shock may result. • A fire or electric shock may r
Inhaltszusammenfassung zur Seite Nr. 11
Do not use or keep combustible spray or an inflammable substance near Caution the product. • An explosion or fire may result. Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! • Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. Ensure the vents are not blocked by tablecloths or curtains. ! • An increased internal temperature may cause
Inhaltszusammenfassung zur Seite Nr. 12
Rest your eyes for more than 5 minutes for every 1 hour of product use. Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that • Eye fatigue will be relieved. children or infants cannot reach. • If children have had the battery in their mouths, consult your doctor ! immediately. Do not touch the screen when the product has been turned on for an When replacing the battery, insert it with the right polarity (
Inhaltszusammenfassung zur Seite Nr. 13
Precautions when handling the panel Do not stand the product as shown in the image. • The panel is fragile and can get damaged. Lay the product down to handle it as shown in the image. • the packaging can be used. ! Ensure you use the handles on the back when moving the product. ! Do not hold or grasp any area of the product within 15mm from the front. 13
Inhaltszusammenfassung zur Seite Nr. 14
Chapter 02 Preparations Using the grooves in the box, lift and remove the top of the box. 2 Checking the Contents Removing the Packaging ― The following images are for reference only. Real-life situations may differ from what is shown in the images. Remove the black locking device at the bottom of the box. 1 1 2 3 Check the components and remove the styrofoam and plastic bag. 3 ― The appearance of actual components may differ from the image shown. Store the box in a dry area so that it ca
Inhaltszusammenfassung zur Seite Nr. 15
Checking the Components Components - Contact the vendor where you purchased the product if any ― Components may differ in different locations. components are missing. - The appearance of the components and items sold separately may differ from the image shown. - A stand is not provided with the product. To install a stand, you can purchase one Quick setup guide Warranty card User manual MagicInfo Lite Edition Software separately. CD (Not available in some locations) Batteries (P.2
Inhaltszusammenfassung zur Seite Nr. 16
Items sold separately - The following items can be purchased at your nearest retailer. Wall-mount Kit Stand RS232C-Stereo cable (P.98) DVI cable (P.42) HDMI-DVI cable (P.42) HDMI cable (P.43) Video cable (P.46) Stereo cable Component cable (P.47) RCA stereo cable (P.49) RCA cable (P.46) AV/Component Adapter (P.46) AUDIO Adapter (P.46) LAN cable (P.99) Network Box (P.50) DP-DVI cable 16
Inhaltszusammenfassung zur Seite Nr. 17
Name Description Parts Remote Control Sensor Aim the remote control towards this spot on the LCD Display. ― Keep the area between the remote sensor and remote control obstacle- free. External sensor KIT Light sensor Automatically detects the intensity of ambient light around a selected display and ― The External sensor KIT has a remote-control sensor, a brightness sensor and adjusts the screen brightness. function keys. If mounting the display onto a wall, you can move the External sensor K
Inhaltszusammenfassung zur Seite Nr. 18
Attaching the External sensor KIT to the sid ― This External sensor KIT can be attached to any part of the display using the double-sided tape provided with the sensor. ― The External sensor KIT can also be attached to a wall near the display. ― Do not attach the External sensor KIT to the display if the display does not have plastic or metal sides. The display can be damaged. 18
Inhaltszusammenfassung zur Seite Nr. 19
Port Description Reverse Side Supplies power to the external sensor board or receives the light sensor signal. ― CONTROL IN The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. IR OUT Receives the remote control signal via the external sensor board and outputs the signal via LOOP OUT. CONTROL IN RJ45 MDC Connects to MDC using a LAN cable. RS232C IN Connects to MDC using an RS232C cable. IR OUT RJ45 MDC RS232C OUT Re
Inhaltszusammenfassung zur Seite Nr. 20
Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: Fix the cable of your anti-theft locking device to a heavy object such as a desk. 1 Put one end of the cable through the loop on the other end. 2 Insert the locking device into the anti-theft lock slot a
