Bedienungsanleitung ADT Security Services ATD-7477

Inhaltszusammenfassung zur Seite Nr. 1

Engine
Transverse Bar
w/ Support Arm
Operating Instructions & Parts Manual
Model Number Capacity
Atd-7477 700 lb.
Atd Tools Inc.
160 Enterprise Drive, Wentzville MO 63385
ATD7477-M0
Printed in China

Inhaltszusammenfassung zur Seite Nr. 2

Save these instructions. For your safety, read, understand and follow the information contained within. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and Safety information shall be conveyed in the operators native language before use of this product is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If an

Inhaltszusammenfassung zur Seite Nr. 3

ASEMBLY (refer Figure 2) OPERATION 1. Insert the wide leg (#13) into tube welded at the end of 1. Determine the location of the two engine support bolts boom (#1) and the narrow leg (#14) to boom exten- on your vehicle. Then place the Engine transverse bar sion (#2). directly over these two bolts. 2. Slide transfer adapter (#11) over the end of boom ex- 2. Adjust the boom extension (#2) to ensure that both tension (#2) with tube toward you. legs (#13 & 14) are sitting inside the fender of the 3.

Inhaltszusammenfassung zur Seite Nr. 4

MAINTENANCE Periodically inspect the Engine Transverse Bar. Ensure all parts move freely. To help prevent rust, wipe clean and/or blow dry after each use. If rust appears, sand affected area and cover with suitable utility paint. Store the Engine Transverse Bar in a clean, dry area. REPLACEMENT PARTS (Refer to Figure 2 on page 3) Not all components of the Engine Transverse Bar are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.