Inhaltszusammenfassung zur Seite Nr. 1
26HFL5561L/27
26HFL5561V/27
32HFL5561D/27
32HFL5561L/27
32HFL5561V/27
32HFL4441D/27
32HFL4461F/27
37HFL4481F/27
37HFL5581D/27
37HFL5581L/27
37HFL5581V/27
42HFL5581L/27
42HFL5581V/27
52HFL5581L/27
52HFL5581V/27
EN User manual
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Enable or disable the remote control 16 Contents Enable standalone mode (Decryption control) 16 Configure the control options 16 1 Notice 3 OSS declaration 3 13 Configure different settings 17 Configure the SmartFeatures 17 2 Important 4 Configure the V-chip and closed caption settings 19 Product information 4 Safety 4 14 Clone data (TV Setup Data) 20 Screen care and sterilization 4 Download clone data from a USB device 20 Environmental care 4 Download clone data
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. C. The appliance has been exposed to rain; or 2. Keep these instructions. D. The appliance does not appear to operate normally or exhibits a 3. Heed all warnings. marked change in performance; or 4. Follow all instructions. E. The appliance has been dropped, or the enclosure damaged. 5. Do not use this apparatus near water. 17. Tilt/Stability - All televisions must comply with recommended 6.
Inhaltszusammenfassung zur Seite Nr. 5
1 Notice © 2010 Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are u
Inhaltszusammenfassung zur Seite Nr. 6
• Risk of injury to children!Follow these precautions to prevent 2 Important the TV from toppling over and causing injury to children: • Never place the TV on a surface covered by a cloth or other Registering your model with Philips makes you eligible for all of the valuable material that can be pulled away. benefits listed below, so don’t miss out. • Ensure that no part of the TV hangs over the edge of the Complete and return your Product Registration Card at once, or register surface.
Inhaltszusammenfassung zur Seite Nr. 7
3 Your TV Congratulations on your purchase, and welcome to Philips! This set contains a lamp with mercury; please dispose of according to all Side controls and indicators local, state and federal laws. Philips pays a lot of attention to produce environment-friendly products in green focal areas. Your new TV contains materials which can be recycled and reused. At the end of its life, specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize
Inhaltszusammenfassung zur Seite Nr. 8
Selects a channel or setting. The guest remote control (optional) m FORMAT Selects a picture format. 1 n A/CH Toggles between the current channel and the last viewed channel. 21 2 o VOL +/- 3 20 Increases or decreases volume. p MENU 4 19 Toggles the main menu on or off. 5 18 q SMART SOUND 6 Launches the sound menu. 17 7 r (STOP)* Stops playback. 16 8 s (PAUSE)* Pauses play. 9 t CC Displays closed captions settings. 10 u SOURCE 15 Selects connected devices. 11 * This remote control is a unified D
Inhaltszusammenfassung zur Seite Nr. 9
h CH +/- The Philips Hospitality setup remote control Switches to the next or previous channel. (not included in box) i Mutes or restores volume. j Miscellaneous buttons (Only E and A/V buttons are used.) E confirms an entry or selection. A/V displays the source list. POWER k VOL +/- RECALL 17 1 Increases or decreases volume. 16 l M TEXT SMART SLEEP CC Accesses the Philips Hospitality setup menu. 15 2 GUEST m RESET DCM 3 Not used. 1 2 3 14 SETUP n GUEST/ DCM/ SETUP 4 5 6 GUEST - Functions as a
Inhaltszusammenfassung zur Seite Nr. 10
4 SmartInstall Software 5 TV setup: access setup menu Philips TV can be completely configure quickly and easily using Philips SmartInstall software, available free of charge from your sales representative or from our website www.philips.com/hospitality. We recommend SETUP recommend this method for the quickest setup. ENGLISH LANGUAGE COMMUNICATION > CHANNEL INSTALL > AUTO INSTALL TV > CABLE TUNING YES USE CHANNEL TABLE YES RING2 CURRENT RING DIGITAL SETUP > CONFIGURATION > > SMARTCLO
Inhaltszusammenfassung zur Seite Nr. 11
Access the Philips Hospitality setup menu with Philips setup 6 Select a language remote control 1 Enter the Philips Hospitality setup menu. 2 Press to select a language. POWER » The setup and guest menus will now be displayed in the selected RECALL language. TEXT SMART SLEEP Note CC • You can choose English, Español or Français as your preferred language. GUEST DCM 1 2 3 SETUP 4 5 6 SETUP 7 8 9 GUIDE RESET CH 0 M A/CH M _ + + + 1 Switch on the TV and select a TV channel. 2 Set the s
Inhaltszusammenfassung zur Seite Nr. 12
In this way, each TV responds to only one RC that is set to the same color 7 Select mode of communication as the TV itself. This prevents interference from each other’s remote control when you watch multiple TVs in a room. 1 Enter the Philips Hospitality setup menu. 2 Press to select COMMUNICATION. Note 3 Press to select one of the following options : • Multi RC supports a maximum of four TVs in one room and requires the • COMMUNICATION: To select the communication protocol use of s
Inhaltszusammenfassung zur Seite Nr. 13
8 Automatically install channels 9 Configure the channels What the guest or the user actually access are program numbers. The TV 1 Enter the Philips Hospitality setup menu. has program numbers 1 - 250 available. Any channel, or external input, 2 Press to select CABLE TUNING. analog or digital can be mapped to any program number, giving the hotel 3 Press to select one of the following: complete flexibility of channel mapping. For example, local channels could • YES: To receive TV
Inhaltszusammenfassung zur Seite Nr. 14
Select a source of input CHANNEL INSTALL 1 Enter the Philips Hospitality setup menu. 2 Press to select CHANNEL INSTALL > INPUT. CHANNEL TV 2 3 Press to select a source of input. INPUT TUNER CHANNEL LOGO > Note DIGITAL YES DIGITAL CH SCROLL > • External inputs can also be assigned to a program number. RF CHANNEL NUMBER 2 MPEG PROGRAM NUMBER 8 > Select a logo for a channel RINGS ( ) LABEL > 1 Enter the Philips Hospitality setup menu. MUTE NONE 2 Press to select CHANNEL INSTALL > C
Inhaltszusammenfassung zur Seite Nr. 15
10 View signal strength or configure RINGS content ratings, closed caption (1X)(2 )(3 )(4 ) CHANNEL RINGS and emergency alerts YES HIGH DEFINITION NO SPORTS 1 Enter the Philips Hospitality setup menu. YES NEWS 2 Press to select DIGITAL SETUP. YES KIDS » Digital setup menu is displayed on your screen. You can configure YES the content ratings, closed caption and emergency alert settings. MOVIES SIGNAL STRENGTH displays the signal strength of the selected YES NETWORK channel in
Inhaltszusammenfassung zur Seite Nr. 16
Enable or disable emergency alert 11 Configure the switch-on settings 1 Enter the Philips Hospitality setup menu. 1 Enter the Philips Hospitality setup menu. 2 Press to select DIGITAL SETUP > EMERGENCY ALERT. 2 Press to select CONFIGURATION > SWITCH ON / OSD. 3 Press to select one of the following options: • ALWAYS: To enable emergency alerts at all times. • SKIP LOW PRIORITY: To skip the emergency alerts of low priority. SWITCH ON / OSD • SKIP MEDIUM LOW PRIORITY: To skip the em
Inhaltszusammenfassung zur Seite Nr. 17
Preset the picture format Configure the picture and sound settings 1 Enter the Philips Hospitality setup menu. 1 Enter the Philips Hospitality setup menu. 2 Press to select CONFIGURATION > SWITCH ON / OSD > 2 Press to select CONFIGURATION > PICTURE / SOUND. SWITCH ON PIC FMT. 3 Press to select one of the available picture formats: » The selected picture format is used to display pictures when the TV is turned on. PICTURE / SOUND 45 BRIGHTNESS COLOR 38 Select the switch-on channel
Inhaltszusammenfassung zur Seite Nr. 18
Enable standalone mode (Decryption control) 12 Configure the security settings The premium HD content received by a satellite or cable is encrypted, 1 Enter the Philips Hospitality setup menu. using a digital rights management system (DRM) called Pro:Idiom®, to avoid 2 Press to select CONFIGURATION > SECURITY. piracy. The technology is embedded in the TV and prevents guests from pirating the content. To decrypt the content, follow the following steps: 1 Enter the Philips Hospitality set
Inhaltszusammenfassung zur Seite Nr. 19
3 Press to select one of the following options: 13 Configure different settings • ESP (Energy saving programmability): Set a time from 1 - 99 hours to enable ESP. If the TV does not receive any command 1 Enter the Philips Hospitality setup menu. for this time period, it enters the standby mode to save energy. 2 Press to select CONFIGURATION. Select OFF to disable ESP. • DIGIT TIMEOUT: Set a time between 1 - 9.9 seconds. When you press a key on your RC, the TV will wait for the speci
Inhaltszusammenfassung zur Seite Nr. 20
3 Press to select one of the following options: 3 Press to select one of the following options: • SMARTPOWER: To enable or disable the power saving mode. • SOURCE: Select RF as the source for software download. Select HIGH for maximum power savings. • DIRECTION: Select DOWNLOAD to download the software • LOW POWER STANDBY: To use minimum power when the from the RF channel. TV is in standby mode. • CABLE TUNING: Select YES to use channels 1 - 135 for • SMARTCP: Select YES to enabl
