Inhaltszusammenfassung zur Seite Nr. 1
EN
User Manual
TYPE Nr. BDH4251V/00
Inhaltszusammenfassung zur Seite Nr. 2
User Manual BDH4251V/00 EN Safety Precautions DISPOSAL OF USED ELECTRICAL & ELECTRONIC EQUIPMENT The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic pr
Inhaltszusammenfassung zur Seite Nr. 3
User Manual BDH4251V/00 During Use Do not open the cover (or back) because high voltage is Never push any kind of objects into this product through present within the Monitor enclosure. openings at the back of Monitor. It may cause electric shock. It may cause fire or electric shock. The apparatus shall not be exposed to Do not allow children to play or hang Do not place a candle or lighted dripping or splashing and that no objects on the Monitor. cigarette on the Monitor. filled with liquids, suc
Inhaltszusammenfassung zur Seite Nr. 4
User Manual BDH4251V/00 EN Safety Precautions Power When moving your Monitor, remove the Do not touch the power plug with wet Always obey all power plug, and cables, and be sure to hands when plugging or unplugging it move it by using two people.. into the wall socket. safety messages. Failure to follow this instruction can result in It can result in a risk of electric shock. • All the safety and electric shock or personal injury. operating instructions should be read before the product is oper
Inhaltszusammenfassung zur Seite Nr. 5
User Manual BDH4251V/00 During Use Do not wipe the Monitor using a cloth Do not place heavy objects or heat The plasma display panel consists damped with chemicals (benzene, of fine cells. Although the panels are sources on the power cord. thinners, etc.). produced with more than 99.9 percent active cells, there may be The Monitor appearance may be marred. It may damage the power cord, causing fire some cells that do not produce light (Unplug the power plug and wipe with soft or electric shock. o
Inhaltszusammenfassung zur Seite Nr. 6
User Manual BDH4251V/00 EN Checking Accessories Note Check to be sure that the following items Supplied Accessories are packed with your Plasma panel. Remote Control 1 UNIT Batteries 1 UNIT Ferrite Core 1 UNIT M5 Screws(30mm) 4 UNITS VGA Cable 1 UNIT AC Power Cable 2 UNITS (UK, Continental) Stand Unit 6 P.MODE PICTURE FMT AV S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE SWAP RECALL MENU VOL VOL TIMER STILL MUTE R-48F01
Inhaltszusammenfassung zur Seite Nr. 7
User Manual BDH4251V/00 Assembling the plasma display stand . . Slide the stand under the plasma display Open and take out the stand from the like the picture below. box and remove wrapper. . Use the enclosed 4 M5 screws to secure the assembled stand. M5 Screws (Picture of a properly installed stand and display) 7 I P A PA A A HDMI PC AU INP DIOUT PC ? COMPONENT NPUT AV1 AV 2 O O DU T T GIC TUL T L IUD I O I UDIO INPUT COMPONENT INPUT AV1 AV2 HDMI PC AUDIO PC ? O OP U T TIP CU AT L DA IG UID
Inhaltszusammenfassung zur Seite Nr. 8
User Manual BDH4251V/00 EN CONTENTS PREPARATION 2 • Safety Precautions 6 • Checking Accessories 7 • Assembling the plasma display stand 10 • Panel Controls 11 • Remote Control CONNECTION 13 • Watching Digital Broadcasts 15 • Watching Cable Broadcasts 17 • Watching Satellite Broadcasts 19 • Watching a DVD Image 21 • Watching a VCR Image 23 • Watching a Camcorder/Game Console Image 25 • Connecting PC(15Pin D-Sub) 27 • Connecting HDMI 29 • Connect with the Dolby Digital AMP. APPLICATION 31 • Sele
Inhaltszusammenfassung zur Seite Nr. 9
User Manual BDH4251V/00 EN Panel Controls Front Panel, Rear Panel Items having the same name on the plasma display and the remote control would function in * exactly the same way. Front Power Stand by Red : Stand by Green : ON Power control sensor 9
Inhaltszusammenfassung zur Seite Nr. 10
User Manual BDH4251V/00 Rear INPUT COMPONENT INPUT AV1 AV2 HDMI PC AUDIO PC ? OPTICAL OUTPUT DIGITAL AUDIO AUDIO MENU MOVE HDMI INPUT MENU MOVE PC AUDIO INPUT PC INPUT (15 pin D-sub) PC OUTPUT (15 pin D-sub) DIGITAL INPUT AV1 AV2 COMPONENT AUDIO PC OUT INPUT HDMI PC AUDIO PC OPTICAL VIDEO AUDIO AUDIO SERVICE External Speaker Power SCART, A/V INPUT/OUTPUT. COMPONENT A/V jacks 10
Inhaltszusammenfassung zur Seite Nr. 11
User Manual BDH4251V/00 Remote Control Note • Use two “AAA” batteries. • Be sure to use replacement batteries of the The number in ( ) indicates the page in which * same type as the original ones. the function of each button is explained in detail. • The life of a battery depends on how much it has been used. 35 PICTURE FMT button Power button 13 Adjusts the size of the screen While the AC power cord is connected, (Normal, 16:9, etc.) turn the display ON (Green light) or OFF (red light stand-by
Inhaltszusammenfassung zur Seite Nr. 12
User Manual BDH4251V/00 Installing the batteries in your remote control 1 Open the battery compartment on the back of the remote control. 2 Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly. 3 Replace the cover. When using remote control Be sure not to allow the remote control to • drop or to become wet. Keep it away from hot or moist locations. • 12
Inhaltszusammenfassung zur Seite Nr. 13
User Manual BDH4251V/00 EN Watching Digital Broadcasts Connect a Digital Broadcasting Receiver to the PDP Watching Digital • Prepare A/V cables. 1 Broadcasts • Connect the cables from the digital TV Receiver output terminal to the PDP(Component ) input terminal. • To watch digital • When connecting the cables, be sure to match the cable colours. broadcasts: - Purchase a separate Digital Broadcasting Receiver(SET-TOP BOX) - Connect the PDP to a Digital Broadcasting Receiver as shown right. HDMI P
Inhaltszusammenfassung zur Seite Nr. 14
User Manual BDH4251V/00 Input Select 3 • Select [Component] by pressing the "AV" button of the remote control or using the button of the PDP unit. AV • When you press the “AV”button, you will see the OSD as shown. you can move using “ “and select desire input mode with “ “ button. AV 1 Picture AV 2 AV 3 Sound Component PC HDMI Screen Feature Input Move Select MENU Exit Select the Desired Channel and Function • Select the desired channel and function 4 by using the remote
Inhaltszusammenfassung zur Seite Nr. 15
User Manual BDH4251V/00 EN Watching Cable Broadcasts Connect a Cable Broadcasting Receiver to the PDP. Watching Cable • Prepare the A/V cable. 1 Broadcasts • Connect the receiver(Output) to PDP(Video Input) as shown below. • To watch cable broadcasts, subscribe to your local cable TV broadcasting, and then connect a cable Broadcasting Receiver to the PDP INPUT COMPONENT INPUT AV1 AV2 HDMI PC AUDIO PC ? OPTICAL OUTPUT DIGITAL AUDIO as shown right. AUDIO MENU MOVE P.MODE PICTURE FMT AV S.MODE S.
Inhaltszusammenfassung zur Seite Nr. 16
User Manual BDH4251V/00 Input Select • Select [AV 1(Scart), AV 2(Scart) or AV3(S-Video)] 3 AV by pressing the [AV] button of the remote control or the in keypad of the PDP unit. • When you press the “AV”button, you will see the OSD as shown. you can move using “ “and select desire input mode with “ “ button. AV 1 Picture AV 2 AV 3 Component Sound PC HDMI Screen Feature Input MENU Exit Move Select Select the Desired Program and Function • Select the desired program and fu
Inhaltszusammenfassung zur Seite Nr. 17
User Manual BDH4251V/00 EN Watching Satellite Broadcasts Connect a Satellite Broadcasting Receiver to the PDP. Watching Satellite • Prepare the A/V cable. 1 Broadcasts • Connect the receiver(Output) to PDP(Video Input) as shown below. • When connecting to an external AV source, be sure to match the colours. • To watch satellite broadcasting, subscribe to Digital Satellite Broadcasting, then connect the satellite Broadcasting Receiver to the PDP as shown right. INPUT COMPONENT INPUT AV1 AV2 HDMI
Inhaltszusammenfassung zur Seite Nr. 18
User Manual BDH4251V/00 Input Select • Select [AV 1(Scart), AV 2(Scart) or AV3(S- 3 AV Video)] by pressing the [AV] button of the remote control or the in keypad of the PDP unit. • When you press the “AV”button, you will see the OSD as shown. you can move using “ “and select desire input mode with “ “ button. AV 1 Picture AV 2 AV 3 Sound Component PC HDMI Screen Feature Input Move Select MENU Exit Select the Desired Program and Function • Select the desired program and f
Inhaltszusammenfassung zur Seite Nr. 19
User Manual BDH4251V/00 EN Watching a DVD Image Connect a DVD Player to the PDP. Watching a DVD • Prepare the AV cable. 1 Image • Connect the DVD(Output) to the PDP(Component or Video Input) as shown below. • When connecting to an external AV source, be sure to match the colours. • Component Input is set to 480i/576i and 480p/576p mode. • Connect the cable from the DVD Video output (Y, Pb/Cb, Pr/Cr) to the Component Input at the back of PDP, and INPUT COMPONENT INPUT AV1 AV2 HDMI PC AUDIO PC ?
Inhaltszusammenfassung zur Seite Nr. 20
User Manual BDH4251V/00 Input Select • Select [Component, AV1(Scart), AV2(Scart) or AV3(S-Video)] 3 AV by pressing the [AV] button of the remote control or the in keypad of the PDP unit. • When you press the “AV”button, you will see the OSD as shown. you can move using “ “and select desire input mode with “ “ button. AV 1 Picture AV 2 AV 3 Sound Component PC HDMI Screen Feature Input MENU Move Select Exit Select the Desired Title and Function • Select the desired title and
