Bedienungsanleitung Peerless Industries MIS374

Inhaltszusammenfassung zur Seite Nr. 1

Installation and Assembly:
20" Column Tilt Mount for 10" - 24" LCD Flat Panel
Screens Using ST 630
Model: MIS374
Max Load Capacity: 80 lb (36.3 kg)
3215 W. North Ave. • Melrose Park, IL 60160  (800) 729-0307 or (708) 865-8870  Fax: (708) 865-2941  www.peerlessmoun ts.com
ISSUED: 03-30-07 SHEET #: 124-9052-1

Inhaltszusammenfassung zur Seite Nr. 2

Note: Read entire instruction sheet before you start installation and assembly. WARNING  Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at 1-800-865-2112.  This product should only be installed by a qualified professional.  Make sure that the column will safely support the combined load

Inhaltszusammenfassung zur Seite Nr. 3

Installation to Solid Concrete Column WARNING  Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor.  Make sure that the column will safely support the combined load of the equipment and all attached hardware and components. Note: Two Alligator® anchors and two #14 x 2-1/2 concrete hex head wood screws from ST 630 fastener pack are 1 surface required to complete assembly. Make sure that column plate (A) is level, use it as a 1 template to mark four m

Inhaltszusammenfassung zur Seite Nr. 4

Installation of ST 630 Tilt Assembly Note: Tilt assembly from ST 630 is required for assembly Attach tilt assembly to column plate (A) using two 1/4-20 x 1/2 phillips screws (D), two split washers (F) and two flat 2 washers (E). TILT ASSEMBLY A E F D Refer to Attaching Adapter Plate to Flat Panel Screen section of ST 630 instruction manual to complete assembly. ISSUED: 03-30-07 SHEET #: 124-9052-1 4 of 4 © 2007, Peerless Industries, Inc. All rights reserved. All other brand and product names ar