Inhaltszusammenfassung zur Seite Nr. 1
TH-32LHD7
Operating Instructions
LCD Display
DISPLAY
TH-32LHD7UY
Model No.
The illustration shown is an image.
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual
for future reference.
English
TQBC0977
T TH H- -3 32L 2LH HD D7 7
Inhaltszusammenfassung zur Seite Nr. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualifi ed service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a triangle is intended to is in tend ed to tell the user tell the user that important that parts inside the product operating and servicing are a risk of electric shock instructions are in the papers to per sons
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat. 9) Do not defeat the safety purpose o
Inhaltszusammenfassung zur Seite Nr. 4
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt as well, and record the model number and serial number of your set in the space provided on the rear cover of these instructions. Table of Contents Important Safety Instructions .
Inhaltszusammenfassung zur Seite Nr. 5
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha
Inhaltszusammenfassung zur Seite Nr. 6
Safety Precautions CAUTION This LCD Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) • Speaker ................................................................... TY-SP32L7W-K • Pedestal .................................................................. TY-ST32L7-
Inhaltszusammenfassung zur Seite Nr. 7
Safety Precautions WARNING Setup Do not place the LCD Display on sloped or unstable surfaces. • The LCD Display may fall off or tip over. Do not place any objects on top of the LCD Display. • If water spills onto the LCD Display or foreign objects get inside it, a short-circuit may occur which could result in fi re or electric shock. If any foreign objects get inside the LCD Display, please consult an Authorized Service Center. Do not cover the ventilation holes. • Doing so may cause the LCD D
Inhaltszusammenfassung zur Seite Nr. 8
Accessories Accessories Supplied Check that you have the Accessories and items shown Operating Remote Control Batteries for the Warranty Instruction book Transmitter Remote Control EUR646535 Transmitter (AA Battery × 2) INPUT SURROUND VOL NR PICTURE SOUND SET UP MULTI ZOOM PIP SWAP SELECT MOVE PICTURE POS. /SIZE ASPECT PC OFF TIMER DISPLAY Ferrite core Ferrite core Fixing bands × 2 AC cord (Small size) × 2 (Large size) × 2 Remote Control Batteries Requires two AA batteries. 1. Turn the transm
Inhaltszusammenfassung zur Seite Nr. 9
Connections When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation. Speakers (Optional accessories) 1 2 1 R AUDIO L VIDEO IN VIDEO OUT R AUDIO L VD HD PR/CR/R PB/CB/B Y/G IN S VIDEO IN AV COMPONENT/RGB IN AUDIO SLOT 1 SLOT 2 PC IN SERIAL SPEAKERS Terminals (L) SPEAKERS 2 AC cord connection (see page 13) Terminals (R) – AC cord fi xing 1. Open the clamper. 2. Insert the AC cord 3. Slide
Inhaltszusammenfassung zur Seite Nr. 10
Connections PC Input Terminals connection COMPUTER AUDIO PC IN TH-32LHD7 Conversion adapter (if necessary) D-sub 15p RGB PC cable Less than Ferrite core Less than 15 (Small size) 15 3” / 3” / 16 16 (supplied) (10 cm) (10 cm) Audio Stereo plug Connect a cable which matches the audio output terminal on the computer. Installing the ferrite core (Small size) 1 2 3 Open Press the cable Pull back the tabs through and close (in two places) Notes: • Computer signals which can be input are those with a
Inhaltszusammenfassung zur Seite Nr. 11
Connections SERIAL Terminals connection The SERIAL terminal is used when the LCD Display is controlled by a computer. COMPUTER 6 7 8 9 14 2 3 5 Ferrite core RS-232C (large size) SERIAL Straight cable (supplied) Pin layout for RS-232C Installing the ferrite core (Large size) 15 Less than 3” / 16 D-sub 9p Open (10 cm) Notes: • Use the RS-232C cable to connect the computer to the LCD Display. • The computer shown is for example purposes only. • Additional equipment and cables shown are not suppli
Inhaltszusammenfassung zur Seite Nr. 12
Connections AV & COMPONENT connection COMPONENT VIDEO OUT RR Example of input signal source PB Y, PB, PR, RCA-BNC OUT DVD adapter plug Y L Digital TV-SET-TOP-BOX AUDIO (DTV-STB) R OUT R AUDIO IN L S VIDEO IN VIDEO IN AV VIDEO OUT R AUDIO L VD COMPONENT/RGB IN HD PR/CR/R PB/CB/B Y/G AUDIO SLOT 1 SLOT 2 PC IN SERIAL RL VIDEO OUT VD HD PR/CR/R PB/CB/B Y/G AUDIO VIDEO IN R AUDIO L IN S VIDEO IN AV COMPONENT/RGB IN PC IN SLOT1 SLOT2 Example of input signal source MONITOR S VIDEO VCR V
Inhaltszusammenfassung zur Seite Nr. 13
Power ON / OFF Connecting the AC cord plug to the LCD Display. Fix the AC cord plug securely to the LCD Display with the clamper. (see page 9) R AUDIO IN L S VIDEO IN VIDEO IN AV VIDEO OUT R AUDIO L VD COMPONENT/RGB IN HD PR/CR/R PB/CB/B Y/G AUDIO SLOT 1 SLOT 2 PC IN SERIAL Connecting the plug to the Wall Outlet Press the Power switch on the LCD Display to turn the set on: Power-On. TH-32LHD7 INPUT MENU -/ VOL +/ ENTER/ Power Indicator: Green Power Indicator Example: The screen below is
Inhaltszusammenfassung zur Seite Nr. 14
Basic Controls C.A.T.S. sensor C.A.T.S. (Contrast Automatic Tracking System) C.A.T.S. automatically senses the ambient light conditions and adjusts the brightness and gradation accordingly, to optimise contrast. (Effective when PICTURE MENU is set to AUTO.) Remote control sensor Volume Adjustment Volume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down TH-32LHD7 (see page 16) Enter / Aspect button INPUT MENU -/ VOL +/ EN
Inhaltszusammenfassung zur Seite Nr. 15
Basic Controls Standby (ON / OFF) button The LCD Display must fi rst be plugged into the wall outlet and turned on at the power switch (see page 13). Press this button to turn the LCD Display On, from Stanby mode. Press it again to turn the LCD Display Off to Stanby mode. SURROUND button ON OFF The surround setting switches on and off each time the SURROUND button is pressed. The benefi ts of surround sound are enormous. You can be completely enveloped in sound; just as if you were at a concer
Inhaltszusammenfassung zur Seite Nr. 16
On-Screen Menu Displays The MENU button on the unit can also be To PICTURE adjust menu 1 Press to select . pressed. (see page 22) PICTURE 1/2 INPUT MENU -/ VOL +/ ENTER/ NORMALIZE NORMAL PICTURE MENU STANDARD BACK LIGHT 20 [ from the unit ] 25 PICTURE Each time the MENU button is pressed, the 0 BRIGHTNESS menu screen will switch. COLOR 0 TINT 0 Normal Viewing PICTURE SETUP SHARPNESS 3 INPUT MENU -/ VOL +/ ENTER/ SOUND PICTURE POS. /SIZE PICTURE 2/2 2 1 NORMAL COLOR TEMP 1 Press to select. COL
Inhaltszusammenfassung zur Seite Nr. 17
On-Screen Menu Displays [ from the unit ] 2 Press to access R each adjust screen. INPUT MENU -/ VOL +/ ENTER/ Press the R button to return to previous menu. Press to return to next menu screen. To SIGNAL screen for VIDEO To SIGNAL screen for (S VIDEO) (see page 29, 30) COMPONENT (see page 30) [ ] [ ] SIGNAL VIDEO SIGNAL COMPONENT 3D Y/C FILTER (NTSC) ON 3 : 2 PULLDOWN OFF COLOR SYSTEM AUTO VIDEO NR OFF 3 : 2 PULLDOWN OFF Panasonic AUTO (4 : 3) NORMAL VIDEO NR OFF To SIGNAL screen for RGB
Inhaltszusammenfassung zur Seite Nr. 18
Initial selections Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. INPUT INPUT SURROUND Press to select the input signal to be played back from VOL the equipment which has been connected to the LCD NR Display. Input signals will change as follows: INPUT1 INPUT2 PC IN PICTURE SOUND SET UP MULTI ZOOM SWAP SELECT MOVE PIP Notes: TH-32LHD7 • Selecting is also possible by pressing the INPUT button on the unit. INPUT MENU -/ VOL +/ ENTE
Inhaltszusammenfassung zur Seite Nr. 19
ASPECT Controls The LCD Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. ASPECT INPUT Press repeatedly to move through the aspect options: SURROUND NORMAL ZOOM FULL VOL [from the unit] Panasonic AUTO JUST NR The aspect mode changes each time the ENTER button INPUT MENU -/ VOL +/ ENTER/ is pressed. PICTURE SOUND SET UP [During MULTI PIP Operations] NORMAL FULL MULTI ZOOM • Picture and Picture, Picture in Picture : PIP SWAP SEL
Inhaltszusammenfassung zur Seite Nr. 20
Adjusting PICTURE POSITION / SIZE PICTURE POS. /SIZE 1 INPUT Press to display the PICTURE POS. /SIZE menu. SURROUND Press to select H-POS / H-SIZE / V-POS / V-SIZE / VOL 2 CLOCK PHASE. N R PICTURE SOUND SET UP MULTI ZOOM PIP SWAP SELECT MOVE Press to adjust POS. / SIZE. PICTURE 3 POS. /SIZE ASPECT PC OFF TIMER During “VIDEO (S VIDEO)”, “COMPONENT” and “DVI” input signal. R PICTURE POS. /SIZE 4 Press to exit from adjust mode. NORMALIZE NORMAL H-POS Notes: H-SIZE • Adjustment details are memorize
