Inhaltszusammenfassung zur Seite Nr. 1
OWNER'S MANUAL
43CM CORDLESS REMOTE LCD TV/MONITOR
MODEL: TFTV435WS
N111
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Inhaltszusammenfassung zur Seite Nr. 2
Congratulation on your purchase of this LCD TV We recommend that you read this manual thoroughly before use to fully enjoy the many functions and excellent features of this unit. Keep this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may differ from the actual model. Contents Index Important Safety Cautions ..................... 1 Selecting channel .................................. 20 Identification of controls ...........
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Cautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Water and moisture - Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. Do not use immediately after moving from a low temperature to high temperature environment, as this causes condensation
Inhaltszusammenfassung zur Seite Nr. 4
Important Safety Cautions When relocating the product placed on a trolley, it must be moved with the utmost care. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley. The power cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product. Power supply cords should be routed so that they are not likely to be walked on or snagged by items placed upon or against them
Inhaltszusammenfassung zur Seite Nr. 5
Important Safety Cautions Important Information Regarding use of Video Games, Computer, captions or other fixed images displays The extended use of a fixed image program material can cause permanent "Shadow Image" on the LCD panel. The background image is viewable on normal programs in the form of stationary fixed images. This type of irreversible LCD panel deterioration can be limited by observing the following steps: * Reduce the Brightness and Contrast settings to a minimum viewing level. * D
Inhaltszusammenfassung zur Seite Nr. 6
Identification of controls 1. SOURCE The Power Indicator light will glow To access the SOURCE select menu yellow when the set is turned on, 2. MENU and glows red when the set is in Press this button to access the MENU main page. the standby mode. 3. CH +/- Change the TV channel. In OSD Menu, press these buttons to choose the OSD items. 4. VOL +/- Increase or decrease the sound volume level. In OSD Menu, press these buttons to adjust the value or setting of each item. 5. POWER ( ) Press this b
Inhaltszusammenfassung zur Seite Nr. 7
Identification of controls (continued) 1. VGA input / PC- Audio in. Connect to the VGA/audio output jacks on your PC. 2. Component input (Y, Pb, Pr, Audio L, R) Connect to the Y/Pb/Pr (or Y/Cb/Cr) and audio output jacks of a Set-Top Box or DVD player. 3. Headphone 3.5mm jack 4. AV outputs (Video, Audio L, R) Connect to the VCR input jacks to record programs. 5. AV inputs (Video, Audio L, R) Receive video/audio signals from external sources such as VCR or DVD player. 6. S-Video input Receive
Inhaltszusammenfassung zur Seite Nr. 8
Remote Control POWER Power on/standby Mute CH Volume up/down selector; Channel up/down selector. VOL VOL In the menu operation, In menu operations, used - + adjust the selected item CH to select item. MENU EXIT Access the menu Exit the menu C.SYS ZOOM CLK SLP Colour system select Setting sleep timer Zoom mode selection Clock setting AUTO.ADJ P.M DSP Auto correct picture Previous channel Select picture mode between Display the current state Bright, Nature, Soft & User 1 2 3 4 5 6 Direct channel
Inhaltszusammenfassung zur Seite Nr. 9
Preparing the Remote Control Please install the batteries before using the remote control. If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control. 1 Open the battery cover. 2. Insert two size-AAA batteries 3 Replace the cover and slide in reverse until the lock snaps. (Slide the cover while (Place the batteries with their pressing down.) terminals corresponding to the (+) and (-) indications in the battery) compartment.) Effective range of the re
Inhaltszusammenfassung zur Seite Nr. 10
Install the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable Installation viewing. Antenna connection Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area. RF Note: It is recommended that the 75-ohm coaxial cable
Inhaltszusammenfassung zur Seite Nr. 11
Installation (continued) Power connection Household power outlet Plug into AC outlet AC cord 1. Connecting the female plug to the AC socket on the unit. 2. Connecting the male plug to the wall outlet as illustrated. Note: This product should only be operated with the type source marked on the label on the unit. Always unplug the power cord when the LCD TV is not in use for an extended period of time. The illustration of power cord and power outlet is only for your reference and may vary dependi
Inhaltszusammenfassung zur Seite Nr. 12
Installation (continued) Elevation adjustment You can adjust the angle of the LCD TV as follows 0 0 The elevation can be adjusted from -5 to +10 average. 10
Inhaltszusammenfassung zur Seite Nr. 13
Installation (continued) 1. Carefully check the terminals for position and type before making any connections. 2. Loose connectors will result in image or colour problems. Make sure that all connectors are securely inserted into their terminals. 3. When connecting an external device, turn off the power to the main unit first tot prevent any possible damage. Connecting the Video/Audio equipment You can connect the unit to a DVD or VCR to enjoy playback with high quality picture and sound. Ple
Inhaltszusammenfassung zur Seite Nr. 14
Installation (continued) The PC input signal connection Connect the VGA (D-sub) input interface on the TV to the output of PC equipment through Min D-sub 15 pin cable as illustrated. For the audio connection, use an audio cord that matches the audio output terminal on the computer. If you select PC signal, please set the input signal source of LCD TV to RGB mode. Audio cable VGA cable (Not supplied) 12
Inhaltszusammenfassung zur Seite Nr. 15
Installation (continued) AV OUT connection How to connect: Connect the video/audio output terminals on the TV set to the signal input terminals of the VCR equipment or the video/audio input terminals on other TV set through a video/audio cable. Connect the audio output terminals on the TV set to the Audio amplifier through audio cable. How to record the TV program: 1. Connect cables as shown above. 2. Turn on the LCD TV and select source. 3. Turn on the VCR and insert the tape. 4. Select the vid
Inhaltszusammenfassung zur Seite Nr. 16
Installation (continued) YPbPr input connection Please connect the YPbPr input terminals on the TV set for better picture quality. And connect the audio outputs with the corresponding audio input terminals on the TV set. If you select YPbPr signal, please set the input signal source of the LCD TV to YPbPr mode. Notes: The Y, Pb, Pr outputs on your DVD player are sometimes labelled Y, Cb, Cr. If so, connect the cables to like colours. 14
Inhaltszusammenfassung zur Seite Nr. 17
Basic Operations Turning on 1 Connect the power correctly, then the red indicator lights up and the unit is in STANDBY mode. POWER 2 Press the POWER ( ) button on the remote control or on the unit to turn on the TV set. The indicator will turn to yellow. CH VOL VOL Turning off - + CH 1 With the power on, press the POWER ( ) button to turn off the EXIT MENU TV and the TV is in STANDBY mode, the indicator will turn to red. C.SYS ZOOM CLK SLP 2 If you want to turn off the power completely, un
Inhaltszusammenfassung zur Seite Nr. 18
Press MENU button to display menu screen. 1 Press VOL+/- to select the menu. 2 Press CH to access the menu. 3 Main On-Screen-Display (OSD) Press CH to select the item. 4 Press VOL+/- to adjust the item. 5 introduction Press EXIT button repeatedly to exit the menu. 6 TV/AV/S-VIDEO MODE YPbPr / RGB MODE Picture Setting Menu Picture Setting Menu brightness 50 brightness 50 contrast 50 contrast 60 color 16 color temp 5000K 7300K 9300K user sharpness 32 customer temp setting tint 0 Sy
Inhaltszusammenfassung zur Seite Nr. 19
Operations Channel Setting There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu. POWER Auto Search 1 Access Channel Setting menu. CH channel number 9 skip off on VOL VOL manual search - + auto search CH 2 Press CH button fine tune EXIT MENU repeatedly to highlight auto channel edit search item. C.SYS ZOOM CLK SLP 3 Press VOL+/- to start Auto VHFH Se
Inhaltszusammenfassung zur Seite Nr. 20
Operations Channel Setting To skip unnecessary channel After presetting the channels, you can skip unnecessary channels so that only the channels you want to watch are POWER selected when you press the CH to change channels. Select the channel number which you want to skip using the 1 CH keypad. VOL VOL - + 2 Access the Channel Setting menu. CH EXIT MENU 3 Press CH to select skip C.SYS ZOOM CLK SLP item. channel number 9 skip off on 4 Press VOL+/- to select on. manual
