Inhaltszusammenfassung zur Seite Nr. 1
OWNER'S MANUAL
107CM CORDLESS REMOTE PLASMA TELEVISION & MONITOR
MODEL: PDP4290HD
N111
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Important Safety Precautions ........................................................................................................... 1 Important Notice ................................................................................................................................. 3 Preparations ....................................................................................................................................... 4 Identification of Controls ................
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Precautions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the se
Inhaltszusammenfassung zur Seite Nr. 4
Important Safety Precautions (Continued) 15. Stand --- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use only the mounting ha
Inhaltszusammenfassung zur Seite Nr. 5
Important Notice Do not use in hot and cold rooms (locations) About Temperature When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the screen to malfunction
Inhaltszusammenfassung zur Seite Nr. 6
Preparations Using the Remote Control Use the remote control by pointing it towards the remote sensor window of the set. Objects between the remote control and sensor window may prevent proper operation. Cautions regarding use of remote control Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity. Do not install or place the remote control under direct sunlight. The heat may cause deformation of the un
Inhaltszusammenfassung zur Seite Nr. 7
Preparations (Continued) Antenna Connection INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used. The exact type and position of the antenna will depend upon your particular area. TV REAR 75-ohm coaxial cable (round cable)
Inhaltszusammenfassung zur Seite Nr. 8
Identification of Controls Main Unit (front view) POWER SWITCH 1 2 3 4 5 6 1. INDICATOR 2. POWER Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY. Press this button to access the MENU main page. 3. MENU 4. VOLUME Press the VOL or VOL button to directly increase or decrease the sound volume level. In menu operations, these buttons serve as right/left buttons. 5. CHANNEL Press these two buttons to directly change th
Inhaltszusammenfassung zur Seite Nr. 9
Identification of Controls (Continued) Main Unit (rear view) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 Speaker output jacks 2 RS-232 terminal: For service only. The user should not use this terminal. 3 S/PDIF digital audio output (optical): Connects to the digital audio input of a digital audio component. 4 HDMI input: HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between this TV and any HDMI-equipped audio/video component, such as a set-top box
Inhaltszusammenfassung zur Seite Nr. 10
Identification of Controls (Continued) Remote Control Unit 1 POWER : Switches the TV power on or Standby 2 TV/Radio: Switches between TV and Radio mode. (DTV only). 3 EPG: Displays the Electronic Program Guide. (DTV only) 4 FAV +/-: Selects the favourite channel. 5 FAV.LIST: Displays the favourite channel list. 6 0-9 number buttons: Press to enter channel numbers or input password. 7 ZOOM: Selects the screen size. (For analog program only) 8 MENU: Displays the main menu screen. 9
Inhaltszusammenfassung zur Seite Nr. 11
Connections Cautions before connecting Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be different depending on your model. Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their terminals. Refer to the operating manual of the external device as well. When connecting an external device, turn the power off to avoid any issues. Connecting digital optic
Inhaltszusammenfassung zur Seite Nr. 12
Connections (Continued) Connecting a Camcorder Cables are often colour-coded to connectors. Connect red to red, white to white, etc. How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder. To playback Camcorder 1. Turn on your TV, then press SOURCE button. The SOURCE menu opens. 2. Press or to select AV 2, then press OK to confirm. 3. Turn on your camcorder and set it to output mode. (For details, refer to your camcorder user manual
Inhaltszusammenfassung zur Seite Nr. 13
Connections (Continued) Connecting a Component Video TV REAR Device with component video Cables are often colour-coded to connectors. Connect red to red, white to white, etc. To connect a device using component video: Connect the Component Video cable between the Y, Cb/Pb, Cr/Pr input jacks on the unit and Y, Cb/Pb, Cr/Pr output jacks on the device. Connect the Audio cable between the AUDIO input jacks on the unit and AUDIO output jacks on the device. To play component video from an external d
Inhaltszusammenfassung zur Seite Nr. 14
Connections (Continued) Connecting a VCR (for Recording) VCR for Recording TV REAR Cables are often colour-coded to connectors. Connect red to red, white to white, etc. AV cable How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR. To record program 1. Turn on your TV, select a program you wish to record. 2. Turn on your VCR, insert a videotape for recording. 3. Press the Record button to begin recording. Only analog TV programs, AV1 and AV 2
Inhaltszusammenfassung zur Seite Nr. 15
Basic Operations Turning On/Off the Power Turning On Insert the power cord into the wall outlet. Press the Power Switch on the unit, then press the POWER button on the unit or on the remote control. The unit will be turned on and you will be ready to use its features. Turning Off With the power on, press the POWER button on the unit or on the remote control to turn off the unit, and put the unit in standby mode. To cut off the power completely, press the Power Switch. Main Menu Overview
Inhaltszusammenfassung zur Seite Nr. 16
Basic Operation (Continued) Selecting the Input Signal Source Source 1. TV Press SOURCE button. 1 2. AV1 3. AV2 4. S-Video 2 Press or to select the input source. 5. YPbPr1 You can quickly go to first item (TV) and last item (HDMI) by pressing or button. 6. YPbPr2 Options include: 7. D-Sub TV - Watch the TV signal. 8. HDMI AV1 - Watch the signal from the AV1 input terminals. AV2 - Watch the signal from the AV2 input terminals. OK Select S-Video - Watch the signal from the S-VIDEO
Inhaltszusammenfassung zur Seite Nr. 17
Memorizing the Channels Your TV can memorize and store all of the available programs (including TV and Radio programs). After the available programs are memorized, use Channel up/down button to scan through the available stations T Auto Searching for Programs Auto Install Manual Install You can complete an auto search to search for all programs (including radio and Channel List Favorite List TV stations) available to your television. The television then stores them in Manual Adjust memory on the
Inhaltszusammenfassung zur Seite Nr. 18
Memorizing the Channels (Continued) Labelling Channel T If a channel is not already labelled, you can label the channel so you know what Auto Install channel you are watching. Manual Install Channel List 1 Favorite List Navigate to SETUP menu and press or to select Manual Adjust, Manual Adjust and then press OK to access the sub-menu. 2 Highlight Program, press or to select a program which you want to label. ABC 3 Press or to select Label, and then press YELLOW button to o
Inhaltszusammenfassung zur Seite Nr. 19
Memorising the Channels (Continued) Favourite Channel Setup Channels List - TV You can make use of channel list to set up your favourite channels. 1. TV 2 2. TV 3 In the channel list, press or to select your favourite program, press RED 1 7. 7 Digital button and a favourite symbol appears alongside the selected channel. 8. TV 7 70. 7 HD Digital 71. 7 Digital 1 2 Repeat the above steps to set more favourite channels. 72. 7 Digital 2 73. 7 Digital 3 22. TV 9 29 TV 10 3 Now a favourite cha
Inhaltszusammenfassung zur Seite Nr. 20
Channel and Program Selection Please note: your new TV is capable of receiving both radio and TV broadcasts. And for TV reception, your new TV is capable of receiving both traditional analog channels and digital channels. When watching digital TV program and you want to listen to radio program, simply press TV/Radio button to switch. To return to TV program, press TV/Radio button again. (When watching analog TV program, the TV/Radio button does not work.) The TV allows channel and program select
