Inhaltszusammenfassung zur Seite Nr. 1
OWNER'S MANUAL
TFTV-201
20.1" TFT LCD Monitor TV
Palsonic Corporation Pty Ltd
1 Joynton Avenue
WATERLOO NSW 201 7 AUSTRALIA
Tel 61 2 93137111 Fax 61 293137555
www.palsonic.com.au
Customer Service - 1300 657 888
Inhaltszusammenfassung zur Seite Nr. 2
Contents Safety Instructions ................................................................... 3 General safety precautions ..................................................... 4 Parts Description 5 Front Panel .......................................................................... 6 Rear Panel ........................................................................... 7~8 Remote Control Unit ............................................................ 9 MENU TREE .........................
Inhaltszusammenfassung zur Seite Nr. 3
Safety Instructions Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designation of the DC adapter corresponds to the local electrical supply. Never insert anything metallic into the cabinet openings of the Liquid Crystal Display (LCD) monitor: doing so may create the danger of electric shock. To avoid electric shock, never touch the inside of the LCD monitor. Only a qualified Technician should open the case of the LCD monitor. Never use your LCD monitor if the
Inhaltszusammenfassung zur Seite Nr. 4
General safety precautions This Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following: Do not place anything heavy, wet or magnetic on the monitor or the power cord. Never cover the ventilation openings with any material and never touch them with metallic or inflammable materials. Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature: 5-35°C Humidity:
Inhaltszusammenfassung zur Seite Nr. 5
Parts Description Front Panel 1. SPEAKER 2. POWER switches the set off (stand-by mode) and on. 3. MENU display the main on-screen menu. Exit from sub-menu. 4. SELECT select input signal or select submenu of the on-screen menus. 5. Volume UP, Volume DOWN adjust the volume. Also adjust the value of a menu option. 6. CH UP, CH DOWN change channels. Also used to highlight selections on the on-screen menus. Accessories DC power Power Cable 15-pin D-Sub User's Manual Frame Audio Remote Supply/Adapter
Inhaltszusammenfassung zur Seite Nr. 6
Parts Description Rear Panel 1. VIDEO OUTPUT 2. AUDIO OUTPUT connects to the audio input port of an additional device. 3. COMPONENT VIDEO INPUT Y, Cb, Cr (480i) video signals from DVD. 4. VIDEO 2 INPUT video signal from VCR or similar devices. 5. AUDIO 2 INPUT audio signals from VCR or similar device. 6. HEAD PHONE JACK 7. S-VIDEO IN S-Video signal from an S-VHS VCR or laser disc player. 8. VIDEO 1 INPUT video signals from VCR or similar device. 9. AUDIO 1 INPUT audio
Inhaltszusammenfassung zur Seite Nr. 7
Remote Control Unit 7
Inhaltszusammenfassung zur Seite Nr. 8
Inserting the Batteries in the Remote Controller You must insert or replace the batteries in the remote controller when you: Purchase the set. Find that the remote controller is no longer operating correctly. 1 Remove the cover of the remote controller by pressing the symbol and pulling the cover space in the direction of the arrow. 2 Insert 2 batteries (AAA size), Care about the polarities. 3 Replace the cover by pushing it in the direction of the arrow. ! You can use your remote controller wit
Inhaltszusammenfassung zur Seite Nr. 9
Menu Tree Main Menu PICTURE CONTRAST BRIGHTNESS SHARPNESS (TV/VIDEO mode) COLOR TEMP (PC mode) COLOR (TV/VIDEO mode) TINT (TV/VIDEO mode, NTSC System) SOUND TREBLE BASS BALANCE (PAL System) S.MODE (NTSC System) MTS GEOMETRY H-POSITION (PC mode) V-POSITION AUTO POSITION FUNCTION TRACKING AUTO TRACKING (PC mode) INFORMATION CLOCK PHASE TUNING (Not available) LANGUAGE (PAL System) FUNCTION TRACKING (Not available) (TV mode, PAL System) INFORMATION SPORT TUNING AUTO TUNING LANGUAGE MANUAL TUNING FI
Inhaltszusammenfassung zur Seite Nr. 10
Connecting a PC Turn off your computer and monitor. 1 Connect a PC D-Sub cable between your PC and 2 PC-VIDEO-IN of the monitor. And then fasten the screws of both sides of the cable. Connect a PC Audio Cable between the Sound 3 Output jack of the sound card on a PC and the PC-AUDIO-IN of the monitor. Connect a DC Power unit cable to the Power jack on 4 the rear of your monitor. And connect a power cable to the DC Power unit before connecting to a power outlet. Power on the computer before turni
Inhaltszusammenfassung zur Seite Nr. 11
Viewing a PC screen Initial set PC mode Power on your monitor by pressing the POWER button 1 on the main set or on the remote controller. Use the PC button on the remote controller to switch to 2 the PC mode. Then the PC screen is automatically set. When a CD-Title runs, the music is output from speakers. (You can use an external speaker via the Audio Output jack on the rear of the main set.) When the picture is unstable Press the MENU button and the PICTURE menu is 1 displayed. Use the VOL
Inhaltszusammenfassung zur Seite Nr. 12
Viewing a PC screen Adjusting the Picture Settings Your monitor has several settings which allow you to control picture quality: CONTRAST, BRIGHTNESS, COLOUR TEMPERATURE Press the MENU button. 1 Result : The PICTURE menu is displayed. Use the CH or CH buttons to select one of the 2 following options: CONTRAST BRIGHTNESS COLOUR TEMPERATURE Press the SEL button. 3 Press the VOL or VOL buttons to suit your 4 personal preference. CONTRAST: Adjust the brightness and dar
Inhaltszusammenfassung zur Seite Nr. 13
Viewing a PC screen Adjusting the Sound Settings The sound settings can be adjusted to suit your personal preference: TREBLE, BASS, BALANCE, S.MODE Press the MENU button. 1 Result: The PICTURE menu is displayed. 2 Use the VOL or VOL buttons to move the SOUND menu. Use the CH or CH buttons to select one of the 3 following options: TREBLE BASS BALANCE S.MODE Press the SEL button. 4 Press the VOL or VOL buttons to suit your 5 personal preference. S.MODE / MTS : To selec
Inhaltszusammenfassung zur Seite Nr. 14
Viewing a PC screen Adjusting the Geometry Settings The geometry settings can be adjusted to centre your viewing screen. 1 Press the MENU button. Result: The PICTURE menu is displayed. 2 Use the VOL , VOL buttons to move the GEOMETRY menu. 3 Use the CH or CH buttons to select one of the following options: H-POSITION V-POSITION AUTO POSITION 4 Press the SEL button. 5 Press the VOL or VOL buttons to adjust the position of screen. If the position of screen is horizontally
Inhaltszusammenfassung zur Seite Nr. 15
Viewing a PC screen PC Stable Adjustment When the screen is unstable in PC settings, or to make your PC stable by adjusting the Clock and Phase, set the PC in the following sequence: Press the MENU button. 1 Result : The PICTURE menu is displayed. Use the VOL , VOL buttons to move the 2 FUNCTION menu. Use the CH button move to TRACKING and then 3 press the SEL button. Result: The TRACKING menu is displayed. Use the CH or CH buttons to select one of the 4 following options: AU
Inhaltszusammenfassung zur Seite Nr. 16
Connecting to watch TV or VCR Connecting the Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of following sources: An outdoor aerial AIR An indoor aerial (not recommendable) A cable television network 1. In the first three cases, connect the aerial or network input cable to the 75 ohm coaxial socket on the bottom of the television. 2. Press the TV mode button on the remote controller. Cable Television Network Connecting the
Inhaltszusammenfassung zur Seite Nr. 17
Viewing a TV/VCR screen Adjusting the Picture Settings 1 Your TV have several settings which allow you to control picture quality: CONTRAST, BRIGHTNESS, SHARPNESS, COLOUR, TINT Press the MENU button. 1 Result: The PICTURE menu is displayed. Use the CH or CH buttons to select one of the 2 following options: CONTRAST BRIGHTNESS SHARPNESS COLOUR TINT (NTSC System) Press the SEL button. 3 Press the VOL or VOL buttons to suit your 4 personal preference. Press the MENU button repeated
Inhaltszusammenfassung zur Seite Nr. 18
Adjusting the Picture Settings 2 By pressing the P.STD button on the remote control, you can sequentially select any one of the four possible preferred analogue picture presets. Whenever this button is pressed, the mode will be changed as follows. CUSTOM STANDARD STRONG MOVIE SOFT CUSTOM Select this mode to view the adjusted picture you want. STANDARD Select this mode to view the factory - presetting standard picture. STRONG Select this mode to - view a powerful and clear picture. - watching in
Inhaltszusammenfassung zur Seite Nr. 19
Viewing a TV/VCR screen Adjusting the Sound Settings 1 The sound settings can be adjusted to suit your personal preference: TREBLE, BASS, BALANCE, S.MODE / MTS Press the MENU button. 1 Result: The PICTURE menu is displayed. Use the VOL ,VOL buttons to move the 2 SOUND menu. Use the CH or CH buttons to select one of the 3 following options: TREBLE BASS BALANCE S.MODE (PAL System) MTS (NTSC System) Press the SEL button. 4 Press the VOL or VOL buttons to suit your 5 personal
Inhaltszusammenfassung zur Seite Nr. 20
Adjusting the Sound Settings 2 By pressing the S.STD button on the remote control, You may get more best sound and change the sound of a suit with a video source. Whenever this button is pressed, the mode will be changed as follows. CUSTOM STANDARD MUSIC MOVIE SPEECH CUSTOM Select this mode to listen the adjusted sound you want. STANDARD Select this mode to listen the factory - presetting standard sound. MUSIC Select this mode to listen the music video or the live picture source. MOVIE Select t
