Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
English Table of Contents Important Information 1 Important Safety Precautions 2 Introducing the OLEVIA TV 5 Accessories 7 TV Installation And Connection Guide Identifying Front Controls and Rear Panels 8 - Descriptions of Connector Types 10 - Turn the power on the TV 11 Installation 12 - Connecting to an Antenna or Video Equipment with Antenna Outlet 13 - Connecting to a Set-Top-Box with HDMI Cables 14 - Connecting to a Satellite Receiver or Cable Box with Component Connectors 15 -
Inhaltszusammenfassung zur Seite Nr. 4
English Important Information Caution Risk of electronic shock Do not open To reduce the risk of electronic shock, do not remove cover (or back). No user-serviceable parts inside. Refer service to qualified Repair Technician or Repair Center. Read the following context indicated by the following symbol to the left. It indicates important literature in operating the product. Read the following context indicated by the following symbol to the left. It indicates a potential high voltage hazard
Inhaltszusammenfassung zur Seite Nr. 5
English Important Safety Precautions Stand Cleaning Do not place the display unit on an unstable Remember to unplug the AC cord from the AC outlet before cleaning the display unit. place. The TV may fall resulting in serious Then spray small amount original WINDEX window personal injuries to nearby people as well as clearer (blue stuff), not Ammonia-added clearer, on damage to the display unit. cloth to clean the display. Remember to use only soft cotton cloth such as an old 100% cotton T-
Inhaltszusammenfassung zur Seite Nr. 6
English Important Safety Precautions Never insert objects or spill liquid Precautions when transporting the into the display unit display Never insert any object into the display unit through Carrying the display requires two or more people. openings or spill liquid on the display unit. High voltage flows in the display unit, and inserting an object can cause electric shock and/or short internal parts. Keep away from water and moisture Do not place the display in areas where moisture is pres
Inhaltszusammenfassung zur Seite Nr. 7
English Important Safety Precautions Replacement parts Reference Grounding component In case the display unit needs replacement parts, make sure that the service technician uses replacement 1 Electric service equipment parts specified by the manufacturer, or those with 2 Power service grounding electrode the same characteristics and performance as the system (NEC Art 250. Part H) original parts. Use of unauthorized parts can result 3 Ground clamps in fire, electric shock and/or other danger.
Inhaltszusammenfassung zur Seite Nr. 8
English Introducing the OLEVIA TV Welcome! Thank you for purchasing a OLEVIA LCD HDTV. This manual is to be used with the following model: OLEVIA 2 Series This manual is designed to help you through setting up and operating your LCD HDTV as quickly as possible. The model and serial numbers are on the back cover of your TV. Write these numbers in the space provided in this manual for your records. Please read all the safety and operating instructions carefully, and keep this manual for fut
Inhaltszusammenfassung zur Seite Nr. 9
English Introducing the Olevia TV OLEVIA LCD HDTV includes many features, you will enjoy throughout the usage of your TV. These highlighted features include: Fully Integrated HDTV (High Definition TV): HDTV delivers a stunning picture far beyond the quality of standard televisions. These programs offer crystal clear video with amazing detail played with enhanced audio quality of digital television programs. You can enjoy better sound and picture in movies, prime time TV shows, and other
Inhaltszusammenfassung zur Seite Nr. 10
English Accessories Supplied Accessories Power cord x 1 User manual x1 Remote control & batteries (AAA x 2) QSG x 1 Warranty Card x 1 These items are all you need to set up and operate the TV in its basic configuration. Note: Most components (VCRs, DVD players, etc.) come with the necessary cables to connect them. If you want to set up a complex system, you may need to buy extra cables, connectors, etc. Be sure to have these on hand before you start to connect your system. 07
Inhaltszusammenfassung zur Seite Nr. 11
English TV Installation and Connection Guide Identifying Front and Rear Panels Front Panel For 242 / 247 Models For 252 / 255 Models IR Sensor IR Sensor ENTER POWER POWER Turns display on/off. ENTER Press to enter to Sub-Menu, or select and confirm your setting. MENU Displays the On Screen Display(OSD) menu. In OSD menu, press it to return to the previous screen or to exit. CH / CH Adjusts Channel. In the OSD menu, both keys are used to navigate within menu. VOL+/VOL- Adjusts Volume. In th
Inhaltszusammenfassung zur Seite Nr. 12
English TV Installation and Connection Guide Identifying Front and Rear Panels Rear Panel 1 Power Connections AC In The power cord connects here. 2 Computer / TV Signal Connections RF Terminal To receive signals from VHF / UHF antennas or a cable system (For TV Models Only) Component 1/2 (5 RCA jacks) Used to connect A/V equipment with component video outputs, such as a DVD player, Digital Satellite Receiver, or compatible Video Game System. Pr/Cr R Pb/Cb L NOTE: The component inputs ha
Inhaltszusammenfassung zur Seite Nr. 13
English TV Installation and Connection Guide Descriptions of Connector Types You may find it necessary to use some of the following cable types during setup. 75-ohm Coaxial Cable For TV/cable connection S-Video Cable Used for transferring video signal, which is split into two signals, brightness and color. Through this connection, you can view a better picture than AV (Composite Video) connection. Used for transferring audio and video signal. Audio/Video Cable This connection is the most co
Inhaltszusammenfassung zur Seite Nr. 14
English TV Installation and Connection Guide Turn the power on the TV Please f ollow these steps to turn the power on to the TV. 1) Before connecting the Power cord, make sure all other connections are done first. 2) Connect the Power Cord from a Wall Outlet to the Power IN Port on the back of the TV as shown below. Back of TV Power Wall IN Port Outlet Power Cord A red or blue light on the front of the TV may turn on. If so, then skip step 3 and step 4. If the light is NOT on, do Step
Inhaltszusammenfassung zur Seite Nr. 15
English TV Installation and Connection Guide Installation In the following pages, you will find directions on how to install your tv and choice of video equipment. Connecting to an Antenna or Video Equipment with Antenna outlet Connecting to a Set-Top-Box with HDMI Cables (Preferred TV connection) Connecting to a Satellite Receiver or Cable Box with Component Connectors (Secondary Preferred after HDMI) Connecting to a DVD Player with A/V or S Video Cables Connecting to a DVD Player with Com
Inhaltszusammenfassung zur Seite Nr. 16
English TV Installation and Connection Guide Connecting to an Antenna or Video Equipment with Antenna outlet (For TV and DTV Source) Disconnect all power sources before making any connection. 1. Connect a 75-ohm coaxial cable (or choice of Antenna Cable) from your cable or antenna to the TV's Antenna jack (RF Terminal). For 242 / 247 / 252 / 255 TFHD Models Rear of TV (75-ohm coaxial cable) If connecting to Video Equipment with Antenna outlet 1. Connect a 75-ohm coaxial cable (or choice
Inhaltszusammenfassung zur Seite Nr. 17
English TV Installation and Connection Guide Connecting to a Set-Top-Box with HDMI Cables (Preferred TV connection) Disconnect all power sources before making any connection. 1. Connect a 75-ohm coaxial cable (or choice of Antenna Cable) from your cable or antenna to the Set-Top-Box's Antenna jack (RF Terminal). 2. Connect a HDMI cable from the Set-Top-Box's HDMI OUT jacks to the TV's HDMI IN jacks. For 242 / 247 / 252 / 255 TFHD Models Cable/ Satellite (75-ohm coaxial cable) 1 2 Set-T
Inhaltszusammenfassung zur Seite Nr. 18
English TV Installation and Connection Guide Connecting to a Satellite Receiver or Cable Box with Component Connectors (Secondary Preferred after HDMI) Disconnect all power sources before making any connections. Use this method of connection if your Satellite Receiver or Cable Box has component (Y, Pb, Pr) jacks. 1.Using a component video cable, connect the Satellite Receiver or Cable Boxes' Y, Pb and Pr jacks to the Y, Pb and Pr jacks on the TV. Colors on Component Video connectors:
Inhaltszusammenfassung zur Seite Nr. 19
English TV Installation and Connection Guide Connecting to a DVD Player with A/V or S Video Cables Disconnect all power sources before making any connections. Use this method of connection if your DVD player does not have component (Y, Pb, Pr) jacks. Note: If your DVD player has component video output connectors, for best picture quality, use the connection described for Connecting to a DVD Player with Component Connectors. (See page.17) 1.Using an A/V cable, connect the DVD player's Audio OUT
Inhaltszusammenfassung zur Seite Nr. 20
English TV Installation and Connection Guide Connecting to a DVD Player with Component Cables Disconnect all power sources before making any connections. Use this method of connection if your DVD Player has component (Y, Pb, Pr) jacks. 1.Using a component video cable, connect the DVD Player's Y, Pb and Pr jacks to the Y, Pb and Pr jacks on the TV. Colors on Component Video connectors: Y: Green Pb (also identified as Cb, CB or B-Y): Blue Pr (also identified as Cr, CR or R-Y): Red No
