Inhaltszusammenfassung zur Seite Nr. 1
OWNER'S MANUAL
68CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 6850PF
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4166
Standards Australia
APP No: N15899
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Inhaltszusammenfassung zur Seite Nr. 2
Contents Congratulations on your purchase of this Palsonic colour television. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this equipment. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents Important Safety Cautions .......................................................................
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Cautions Safety Cautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose the TV set to rain or excessive moisture. Avoid using the set in very warm or damp places and never use it in a bathroom. When cleaning dust off the picture tube disconnect the power first. You can wipe lightly with a piece of dry, clean and soft cloth. Avoid exposing the s
Inhaltszusammenfassung zur Seite Nr. 4
This TV set can operate on a power of ~240V, 50Hz. You must not use a power supply of any other type. Do not cover the ventilating hole in the cabinet Keep a space of more than 10cm from the walls to the TV set to ensure adequate ventilation. If the power cord or the plug is damaged contact a qualified service department for service. When the TV set is to be left unattended for a long period of time, turn off the power supply and remove the plug from the wall outlet. Don't try to push anything i
Inhaltszusammenfassung zur Seite Nr. 5
Identification of Controls Front View Power Switch Indicator Remote Sensor TV/AV MENU CH- CH+ VOL- VOL+ TV/AV CHANNEL DOWN VOLUME DOWN MENU CHANNEL UP VOLUME UP Back View S-Video input AV2 input Antenna input AV outputs DVD inputs AV1 inputs 4
Inhaltszusammenfassung zur Seite Nr. 6
Remote Control Power on/Standby Direct channel select Switch between current channel and last viewed channel Program sort and select Enter/exit game Select AV or TV To display current TO mute the sound channel information To display picture menu To display sound menu To display menu main page Channel select or Adjust volume or adjust menu menu item select in menu item in menu operation operation Scanning programs Picture mode select Sleep timer Sound mode select To turn on/off woofer Surround so
Inhaltszusammenfassung zur Seite Nr. 7
Installation INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Antenna installation Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used. The exact type and position of the antenna will depend upon your particular area. TV REAR RF Notes: It is recommended that the 75-ohm
Inhaltszusammenfassung zur Seite Nr. 8
Installing batteries Effective range of the Remote Open the battery cover. Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. Replace the battery cover. Notes: When there is an obstacle between the TV Notes: and the transmitter, the transmitter may not The battery life should be about one year operate. under normal life. Do not try to recharge When direct sunlight, and incandescent lamp, batteries not intended to be recharged.
Inhaltszusammenfassung zur Seite Nr. 9
Connections To connect AV input terminals You can connect video equipments such as a VTR and video camera to this TV and enjoy the high quality picture and sound. If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input terminal (special S-VIDEO type) of the unit. If not, connect it to the VIDEO terminal (RCA ). The S-VIDEO and AV2 use the same group of audio input terminals, and the S-VIDEO input terminal has priority over the AV2 VIDEO terminal. To use equipment c
Inhaltszusammenfassung zur Seite Nr. 10
To connect DVD input terminals The figure below shows how to connect the DVD input terminals of the TV set to the DVD Player, Laser Disk Player, etc :Direction of the signal TV SET REAR W :White (audio L/MONO) DVD Player, R :Red (audio R, CR) Laser Disk Player etc. G :Green (Y) B :Blue (CB) Signals Y C C L/MONO R B R Notes: 1. Both the CR terminal and the audio R terminal are red for easy identification. Make sure they are correctly connected. 2. DVD and AV1 use the same group of audio inpu
Inhaltszusammenfassung zur Seite Nr. 11
Turning On/Off Turing On Insert the Power cord into the wall outlet, press the 1 Power Switch, the unit goes to STANDBY mode. Power on 2 Press the CH+/- on the unit, or press any one of the /Standby button, CH+/- or 0-9 buttons on the remote control to turn it on. Notes: If there is no TV input signal, then a blueback appears. After 10 minutes, the set auto goes to STANDBY. Turing Off 1 Press the Power Switch on the TV set if you want to cut off the power completely. 2 If you want to turn o
Inhaltszusammenfassung zur Seite Nr. 12
Tuning In Menu Operations Press the MENU to access the menu main page. Press the MENU repeatedly to select a sub-menu page. Use CH+/- to select menu item or VOL+/- to adjust the value of menu item. Press DSP or wait for approx. 10 seconds without any operation to exit menu. Channel Preset The unit provides two ways for you to preset channels: Auto Search and Manual Search. 1 Access the PRESET menu page. Press the MENU repeatedly to display the PRESET menu page. PROGRAM 001 SKIP OFF BAND V-L FI
Inhaltszusammenfassung zur Seite Nr. 13
Tuning In 3 Manual Search If auto search can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual Search. 3.1 From the PRESET menu, press PROGRAM 001 SKIP OFF CH+/- to select PROGRAM item BAND V-L FINE TUNE and use VOL+/- to select a MANUAL SEARCH AUTO SEARCH program number. CH.SWAP - - - CH TYPE NEWS SEL. SET Direct Channel Note: You can also use 0-9 button to input the channel select number directly
Inhaltszusammenfassung zur Seite Nr. 14
4 To skip an unnecessary channel After presetting the channels, you may skip unnecessary channels so that only the channels you want to watch are selected with CH+/- button. 4.1 From PRESET menu select an unwanted channel number, for PROGRAM 010 SKIP ON example, channel 10. (Please refer BAND V-L FINE TUNE MANUAL SEARCH to step 3.1) AUTO SEARCH CH.SWAP - - - 4.2 Press CH+/- to select SKIP CH TYPE NEWS item. Press VOL+/- to set ON. Now SEL. SET channel 10 will be skipped when you browse channels
Inhaltszusammenfassung zur Seite Nr. 15
Tuning In 6 The setting system If the picture's colour is abnormal, 9 AUTO press the C-SYS button to select a B/G proper colour system. Every press of this button, the colour system changes as follows: AUTO PAL N3.58 N4.43 Note: You may also use the SYSTEM menu page to set the colour system. In this model, you needn't adjust the sound system. Direct Channel select 7 Channel Swap Setting program You may use this function to edit the program order. type according to your preference. From the PRESE
Inhaltszusammenfassung zur Seite Nr. 16
Channel Selection 1. Using number buttons Select one-digit channel number 8 Press 0-9 buttons Select two-digit channel number -- 8- 85 Press 0-9 Press --/--- Press 0-9 buttons buttons Direct channel select Previous Select three-digit channel number channel Program type select 1-- 12- 128 Press --/--- Press 0-9 Press 0-9 Repeatedly buttons buttons Note: Channel up If you select a two-digit or three-digit channel the period of two-press should be within 2 seconds. 2. Using CH+/- buttons Channel do
Inhaltszusammenfassung zur Seite Nr. 17
Picture and Sound Adjustment 1 Picture adjustment Press P.M button to quickly select picture mode as COLORFUL, MILD, STANDARD, NATURE and CUSTOM. You may follow these steps to adjust picture according to your preference. Press PIC button repeatedly to select a desired item you want to COLORFUL adjust, then press VOL+ or VOL- MILD to adjust it. STANDARD Press NATURE Item VOL- VOL+ CUSTOM BRIGHTNESS Darker Lighter Stronger CONTRAST Weaker COLOR Paler Deeper BRIGHTNESS 51 To display CONTRAST 100 Sh
Inhaltszusammenfassung zur Seite Nr. 18
Mode Sound quality SPEECH Suitable for listening to news/dialogue. MUSIC Like a music hall filled with a rich warm sound. MOVIE Like a movie theatre filled with a dynamic sound STANDA Standard sound CUSTOM The sound quality you set. If you want to adjust sound to your desired status, press SND button BALANCE 00 TREBLE +25 repeatedly to select a item you BASS +25 SURROUND STEREO want to adjust and press VOL+/- SUD MOD CUSTOM to adjust. Your adjustments will be ............................... memo
Inhaltszusammenfassung zur Seite Nr. 19
Clock Setting Clock Setting Press MENU repeatedly to display CLOCK menu page Note: Before you perform any timer settings, you need to set current time firstly. If you fail to set current time, your timer settings is invalid. TIME -- : -- 1 Setting current time OFF-TIME -- : -- ON-TIME -- : -- From the CLOCK menu page, press CH-TIME -- : -- PROGRAM - - - CH+/- to select TIME item. You need to set hour and minute: use VOL- to set hour from 0-23; use VOL+ to set SEL. SET minute from 00-59. TIME 8 :
Inhaltszusammenfassung zur Seite Nr. 20
System Setting System setting Press MENU repeatedly to display SYSTEM menu page. 1 Setting black background From the SYSTEM menu page, press CH+/- to select BLACK BACK item. COL.SYS AUTO SIF.SYS B/G Press VOL+/- to select ON or OFF. BLACK BACK ON ZOOM NORMAL If ON is selected, the screen is black and the unit goes to screen saving mode when no signal is received (in SEL. SET TV mode only). 2 ZOOM mode From the SYSTEM menu page, press CH+/- to select ZOOM item. Press COL.SYS AUTO SIF.SYS B/G VOL+
