Inhaltszusammenfassung zur Seite Nr. 1
TM
LCD4000
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Important Information .......................................................................................................................... 1 Safety Precautions, Maintenance, & Recommended Use ................................................................. 2 Contents .................................................................................................................................................... 3 Attaching LCD Options ..................................
Inhaltszusammenfassung zur Seite Nr. 3
Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE
Inhaltszusammenfassung zur Seite Nr. 4
Safety Precautions, Maintenance & Recommended Use Safety Precautions and Maintenance Recommended Use FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN CAUTION SETTING UP AND USING THE LCD4000 LCD COLOR MONITOR: CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR • DO NOT OPEN THE MONITOR. There are no user serviceable CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK parts inside and opening or removing covers may expose you to THE FOLLOWING WHEN YOU POSITION THE MONITOR: dangerous shock haza
Inhaltszusammenfassung zur Seite Nr. 5
Contents Your new LCD4000™ monitor box* should contain the following: • LCD monitor • Power Cord (3m) • Ferrite Core x 2 • Video Signal Cable – SC-B113 (4m) • Stand for the Independence x 2 • User’s Manual • Screw (M5 x 40) x 4 • Wireless Remote Control and AA Batteries • Clamper x 2 • Screw (M4 x 10) x 2 • CD-ROM Screw (M5 x 40) for stand x 4 Stand for the Independence x 2 Power Cord Video Signal Cable (D-SUB to D-SUB Cable) Clamper x 2 Screw (M4 x 10 ) x 2 Ferrite Core x 2 Band TM REMOTE CONTR
Inhaltszusammenfassung zur Seite Nr. 6
Attaching LCD Options You can attach mounting accessories to the LCD monitor in one of Ventilation Requirements for enclosure the following two ways: mounting To allow heat to disperse, leave space between surrounding objects as shown in the diagram to the right. 1. In the upright position * *Ambient temperature should be less than 40 deg C 2. Lay the screen face down Protective Sheet To avoid falling down Fasten the LCD monitor to a wall using a cord or chain which is sufficient to support th
Inhaltszusammenfassung zur Seite Nr. 7
Parts Name and Functions Control Panel 9 10 Button Location EXIT INPUT MUTE 8 7 6 5 4 3 2 1 1 POWER button ( ) 7 DOWN ( ) button Switches the power on/off. See also page 17. Activates the OSM menu when the OSM menu is turned-off. Acts as button to move the highlighted area down to select the adjustment with OSM menu. MUTE button 2 Switches the audio mute ON/OFF. 8 EXIT button Activates the OSM menu when the OSM menu is turned-off. 3 INPUT button Acts as EXIT button to move to previous
Inhaltszusammenfassung zur Seite Nr. 8
Parts Name and Functions –continued Terminal Panel AC IN connector 6 AUDIO IN 1,2,3 1 Connects with the supplied power cord. To input audio signal from external equipment such as a computer, VCR or DVD player. 2 RGB 1 IN (DVI-D) 7 To input digital RGB signals from a computer having a digital RGB AUDIO OUT output. To output the audio signal from the AUDIO IN 3 jack. * This connector does not support analog input. 8 VIDEO VIDEO IN connector (BNC and RCA): To input a composite video 3 RGB 2 IN (min
Inhaltszusammenfassung zur Seite Nr. 9
Parts Name and Functions –continued Wireless Remote Control 7 VOLUME UP button 5 4 3 Increase the audio output level. 8 VOLUME DOWN button Decrease the audio output level. 9 PIP (Picture In Picture) button 1 ON/OFF button: Toggle switches between PIP-ON/ POP-ON/OFF. INPUT button: Select the ‘picture in picture’ input signal. 2 CHANGE button: Replaces to the main picture and sub 6 picture. Sub Picture 9 R2 GB1R3 GBRD GBDO VD/H VIDE 7 ___ RGB1 10 8 ___ _ RGB2 13 11 ___ _ RGB3 14 _ _ ___ DVD
Inhaltszusammenfassung zur Seite Nr. 10
Parts Name and Functions –continued Operating Range for the Remote Control Caution Point the top of the remote control toward the LCD monitor's re- The remote control system may not function when direct sunlight mote sensor during button operation. or strong illumination strikes the remote control sensor of the LCD Use the remote control within a distance of about 7 m/23 ft. from monitor, or when there is an object in the path. the front of the LCD monitor's remote control sensor and at a hori-
Inhaltszusammenfassung zur Seite Nr. 11
Setup Procedure 1. Determine the installation location 6. Operate the attached external equipment CAUTION Display the signal on the external equipment you wish. Installing your LCD display must be done by a qualified techni- 7. Adjust the sound cian. Contact your dealer for more information. Make adjustments when adjustment of the volume is required. 8. Adjust the screen (See pages 19-27) CAUTION Make adjustments when adjustment of the screen display MOVING OR INSTALLING THE LCD MONITOR MUST BE
Inhaltszusammenfassung zur Seite Nr. 12
Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram Wiring Diagram Personal computer LCD monitor DVD player Personal computer HD or laser disc player VCR Equipment with LCD monitor (second monitor) digital interface Mounting Position of Ferrite Core Attaching the Ferrite Core Attach the Ferrite Core to PC Audio Cable and S-VIDEO Cable. Use o
Inhaltszusammenfassung zur Seite Nr. 13
Connections –continued Connecting the LCD Monitor to a PC Connecting your computer to your LCD monitor will enable you to display your computer's screen image. Some video cards may not display an image correctly. • To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the provided RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin). • To connect the RGB 3 DVD/HD IN connector (BNC) on the LCD monitor, use a signal cable (mini D-sub 15 pin to BNC x 5). Select RGB 3 f
Inhaltszusammenfassung zur Seite Nr. 14
Connections –continued ® Connecting to a Macintosh Computer ® Connecting your Macintosh computer to your LCD monitor will enable you to display your computer's screen image. Some video cards or drivers may not display images correctly. • To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the provided RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin). ® For older Macintosh computers, use Macintosh cable adapter to connect to your Macintosh's video port. NOTE: T
Inhaltszusammenfassung zur Seite Nr. 15
Connections –continued Connecting to a Computer with a Digital Output Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. • The RGB 1 IN connector also accepts a DVI-D cable. • Input TMDS signals conforming to DVI standards. • To maintain display quality, use a cable recommended by DVI standards. • The AUDIO IN 1, 2 and 3 can be used for audio input. For connection, select AUDIO 1, 2 or 3 from the AUDIO INPU
Inhaltszusammenfassung zur Seite Nr. 16
Connections –continued Connecting to a VCR or Laser Disc Player Connecting your VCR or laser disc player to your LCD monitor will enable you to display your VCR or laser disc player video. Refer to your VCR or laser disc player owner's manual for more information. • Video signals can be connected to either the VIDEO IN [RCA or BNC] or the S-VIDEO IN connector. NOTE: If S-VIDEO and RCA are both connected, S-VIDEO will have priority. • Video output will be from the OUT connector that has been set
Inhaltszusammenfassung zur Seite Nr. 17
Connections –continued Connecting to a DVD Player Connecting your DVD player to your LCD monitor will enable you to display your DVD video. Refer to your DVD player owner’s manual for more information. • To connect the RGB 3 DVD/HD In connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will need a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided). Some DVD players may have different connectors, such as C
Inhaltszusammenfassung zur Seite Nr. 18
Connections –continued Connecting to a Stereo Amplifier You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier owner's manual for more information. • Turn on the LCD monitor and the amplifier only after all hookups have been made. • Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and the audio input on the amplifier. • Do not reverse the audio left and right jacks. • The AUDIO IN 3 used for audio input. • The AUDIO OUT jack outputs sound f
Inhaltszusammenfassung zur Seite Nr. 19
Basic Operation –Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on or red in off mode. The monitor can be powered on or off using the following three options: 1. Pressing the power button. NOTE: Before operating the remote control, be sure to turn on the Main Power Switch on the LCD monitor. Power Button 2. Using the remote control NOTE: Before operating the remote control, be sure to turn on the Main Power Switch on the LCD monitor. REMOTE CONTROLLER RU-
Inhaltszusammenfassung zur Seite Nr. 20
Basic Operation –continued Power Indicator OSM Information RGB1, 2, 3 Power Indicator Status RGB2 Video Input mode 1024 x 768 Input signal Information Power ON Green ) 48kHz 60Hz Power OFF Red AUDIO : 1 Audio input mode SCREEN SIZE : FULL Picture Size mode Power Standby Red and Green DVD/HD When Using Power Management Function DVD/HD Video Input mode AUDIO : 3 Audio input mode The LCD monitor follows the VESA approved DPMS Power Man- SCREEN SIZE : WIDE Picture Size mode agement function. T
