Inhaltszusammenfassung zur Seite Nr. 8
� � � � � � � � � � � � � � � � � � � � ������������������������������������������������������ � � � � � � � � � � � � � � � � � � � � � � � � � � ������������������������������������ � � � Adjusting the Position, Size, Fine Picture, Picture Adj ...... � � � � � � � � � � � � � � � � � � � � ������������������������������������������� � � ������� � � � � � � � � � � � � � � � � � � � � ���������������������������������������������� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Inhaltszusammenfassung zur Seite Nr. 9
Inhaltszusammenfassung zur Seite Nr. 10
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � CAUTION This device needs to be attached to a stand or other mounting hardware. Be sure to use a stand or other mounting hardware that is designed specifically for this product. DO NOT USE THE BOTTOM CARTON AS A TEMPORARY OR PERMANENT STAND. (See Drawing A) When installing or carrying, use the Drawing B handles attached to the upper back Drawing A of the display. You can attach your optional mount or stand to the plasma display in t
Inhaltszusammenfassung zur Seite Nr. 11
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ���������� ������ ����� � ������ � ���������� ������������� ���������� ������ ����� � ������ � ���������� ������������� � � � � � � � � POWER � LEFT/ and RIGHT/+ Push this button to turn the displays main power on or � � Functions as the ADJUST ( � / ) buttons in the On- off. Screen Menu mode. � REMOTE SENSOR WINDOW � VOLUME and Receives the signals from the remote control. Adjusts the volume. Functions as the ADJUST ( �/ �) b
Inhaltszusammenfassung zur Seite Nr. 12
COMPONENT 1 RGB2/COMPONENT2 MONITORLINK INPUT 2 INPUT 1 R/Cr/Pr G/Y B/Cb/Pb H V MONITORLINK CONTROL INPUT 3 � � � � � � � � � � � � � � � � � � C D E F G H A B I A AC IN F RGB2 / COMPONENT2 Connect the included power cord here. COMP2: You can connect DVDs, High Definition sources, Cable Boxes, etc. B EXT SPEAKER L and R here. Connect speakers (optional) here. Maintain the correct This input can be set for use with an polarity. Connect the (positive) speaker wire to the RGB or component source
Inhaltszusammenfassung zur Seite Nr. 13
� ADJUST ( � / � / � � / �) � � � � � � � � � � � � � � Use these buttons to select items or settings and to adjust settings or switch the display patterns. � EXIT Press this button to exit the MAIN MENU. Press this button during the display of the sub menu to return to the previous menu. � MUTE Press this button to mute the audio. ����� ���� � VOLUME ( ) ����� � Press this button to adjust audio volume. ������ � � ZOOM ( ) Press this button to enlarge or reduce the image. � � CONTRAST Press thi
Inhaltszusammenfassung zur Seite Nr. 14
Operating Range � � � � � � � � � � � � � � � � � � � � � � � � � � � � � * Use the remote control within a distance of about 7 m/ 23ft. from the front of the displays remote control sensor Battery Installation and Replacement and at horizontal and vertical angles of up to approximately Insert the 2 AAA batteries, making sure insert them with 30°. the proper polarity. * The remote control operation may not function if the displays remote control sensor is exposed to direct 1.Remove the remot
Inhaltszusammenfassung zur Seite Nr. 15
����� ������� ����������� ��������������� ������� ������� ������� ��� ������� � � ����� ������� ������� ������� � � � � � � � � � � � ������������������������ �������� � � �� ��������������� ������������������ ���������������� ����������� ����������� ����������� ������������������������ ��������������� ������������������� ������������������������ � ��������������������������������������������������� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ���
Inhaltszusammenfassung zur Seite Nr. 16
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � Connecting your PC or Macintosh computer to your plasma Use common RCA cables* (not provided) to connect your display will enable you to display your computers screen VCR to your plasma display. To make these connections, image for an impressive presentation. The plasma display simply: supports the signals described on page 34. To connect a PC or Macintosh simply: 1. Turn off th
Inhaltszusammenfassung zur Seite Nr. 17
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � MonitorLink and MonitorLink Control � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1. Connect a HDMI to HDMI cable from the MONLINK OUTPUT of a Mitsubishi HD-6000 Receiver/Controller 5 4 3 2 1 to the MONLINK input on the plasma display. A HDMI 10 9 8 7 6 15 14 13 12 11 to HDMI cable and a RS-232C cable are included in the HD-6000 accessory box. Pin No
Inhaltszusammenfassung zur Seite Nr. 18
� � � � � � � � � � � � � � � � Using the cable clamps provided with the plasma display Back of the unit bundle and attach the signal and audio cables to the back panel. mounting hooks/mounting holes To attach To detach 1. 2. ����� cables ������������� 9 9
Inhaltszusammenfassung zur Seite Nr. 19
Basic Operations POWER INFO ON: To check the settings: 1. Plug the power cord into an active AC power outlet. 1. The screen changes each time the INFO button is pressed. 2. Press the Power button located underneath the right side of the front panel. 2. If the button is not pressed for approximately three The displays POWER/STANDBY indicator turns green seconds, the menu turns off. and the plasma display is on. DIGITAL ZOOM OFF: Digital zoom specifies the picture position and enlarges the picture
Inhaltszusammenfassung zur Seite Nr. 20
To cancel the off timer: SLEEP/OFF TIMER To set the off timer: 1. Press the SLEEP button twice in a row. The off timer can be set to turn the power off after 30, 60, 2. The off timer is canceled. 90 or 120 minutes. OFF TIMER 0 1. Press the SLEEP button to start the timer at 30 minutes. 2. Press the SLEEP button to the desired time. 3. The timer starts when the menu turns off. → 30 → 60 → 90 → 120 → 0 OFF TIMER 30 Note: After the power is turned off with the off timer ... A slight current i
Inhaltszusammenfassung zur Seite Nr. 1
Owner’s Guide
Mitsubishi Plasma Display PD-5050 & PD-6150
Inhaltszusammenfassung zur Seite Nr. 2
IMPORTANT SAFETY INSTRUCTIONS (PD-5050/PD-6150) Read before operating equipment 1. Read these instructions. 17. Tilt/Stability - All televisions must comply with 2. Keep these instructions. recommended international global safety standards for 3. Heed all warnings. tilt and stability properties of its cabinets design. 4. Follow all instructions. • Do not compromise these design standards by 5. Do not use this plasma display near water. applying excessive pull force to the front, or top, of 6. Cl
Inhaltszusammenfassung zur Seite Nr. 3
Important Information Precautions Warnings and Safety Precautions Please read this manual carefully before using your Mitsubishi The Mitsubishi plasma display is designed and plasma display and keep the manual handy for future reference. manufactured to provide long, trouble-free service. No maintenance other than cleaning is required. Use a soft dry cloth to clean the panel. Never use CAUTION solvents such as alcohol or thinner to clean the panel RISK OF ELECTRIC SHOCK surface. DO NOT OPEN
Inhaltszusammenfassung zur Seite Nr. 4
Recommendations to avoid or minimize uneven phosphor NOTE: aging: When you connect a computer to this monitor, use an RGB cable including the ferrite cores on both ends of the cable. Like all phosphor-based display devices and all other gas If you do not do this, this display will not conform to plasma displays, plasma displays can be susceptible to uneven mandatory FCC standards. phosphor aging under certain circumstances. Certain Attaching the ferrite cores: operating conditions, such as the c
Inhaltszusammenfassung zur Seite Nr. 5
WARNING: Do not leave stationary or letterbox images on-screen for extended periods of time. Mix types of pictures shown. Uneven phosphor aging is NOT covered by your warranty. The normal use of a TV should include a mixture of TV Still or stationary images may be received from broadcasters, picture types. The most frequently used picture types should cable channels, satellite channels, DVD discs, video tapes, fill the screen with constantly moving images rather than laser discs, on-line service
Inhaltszusammenfassung zur Seite Nr. 6
Cleaning Safeguards Plasma Display Screen & Cabinet Please follow the cleaning safeguards listed below to prevent damage to your Plasma Display and retain this document for future reference. IMPORTANT: No Abrasives! DO NOT use any kind of abrasive cloth or cleaner or ammonia on the Plasma Display’s screen or cabinet. Cleaning Your Plasma Display Normally, light dusting with a dry, non-abrasive cloth will clean your Plasma Display. If cleaning beyond this is needed, please follow these guidelines
Inhaltszusammenfassung zur Seite Nr. 7
Introduction Introduction to the PD-5050/ Contents of the Package Plasma display PD-6150 Plasma Displays Power cord Mitsubishi’s PD-5050/PD-6150 plasma displays are a Remote control with two AAA Batteries seamless blend of cutting-edge visual technology and Owner’s guide sophisticated design. The displays sleek techno-art lines blend Registration Card in well with most environments. The displays crisp, vivid Safety metal fittings* image quality will transform data from any graphic me