Inhaltszusammenfassung zur Seite Nr. 1
Owner’s Guide
Mitsubishi Plasma Display PD-4265 & PD-5065
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS (PD-4265/PD-5065) Read before operating equipment 1. Read these instructions. 17. Tilt/Stability - All televisions must comply with 2. Keep these instructions. recommended international global safety standards for 3. Heed all warnings. tilt and stability properties of its cabinets design. 4. Follow all instructions. • Do not compromise these design standards by 5. Do not use this apparatus near water. applying excessive pull force to the front, or top, of 6. Clean o
Inhaltszusammenfassung zur Seite Nr. 4
Important Information Precautions Warnings and Safety Precautions Please read this manual carefully before using your Mitsubishi The Mitsubishi plasma display is designed and plasma display and keep the manual handy for future reference. manufactured to provide long, trouble-free service. No maintenance other than cleaning is required. Use a soft dry cloth to clean the panel. Never use CAUTION solvents such as alcohol or thinner to clean the panel RISK OF ELECTRIC SHOCK surface. DO NOT OPEN
Inhaltszusammenfassung zur Seite Nr. 5
Recommendations to avoid or minimize uneven phosphor NOTE: aging: When you connect a computer to this monitor, use an RGB cable including the ferrite cores on both ends of the cable. Like all phosphor-based display devices and all other gas If you do not do this, this display will not conform to plasma displays, plasma displays can be susceptible to uneven mandatory FCC standards. phosphor aging under certain circumstances. Certain Attaching the ferrite cores: operating conditions, such as the c
Inhaltszusammenfassung zur Seite Nr. 6
WARNING: Do not leave stationary or letterbox images on-screen for extended periods of time. Mix types of pictures shown. Uneven phosphor aging is NOT covered by your warranty. The normal use of a TV should include a mixture of TV Still or stationary images may be received from broadcasters, picture types. The most frequently used picture types should cable channels, satellite channels, DVD discs, video tapes, fill the screen with constantly moving images rather than laser discs, on-line service
Inhaltszusammenfassung zur Seite Nr. 7
Cleaning Safeguards Plasma Display Screen & Cabinet Please follow the cleaning safeguards listed below to prevent damage to your Plasma Display and retain this document for future reference. IMPORTANT: No Abrasives! DO NOT use any kind of abrasive cloth or cleaner or ammonia on the Plasma Display’s screen or cabinet. Cleaning Your Plasma Display Normally, light dusting with a dry, non-abrasive cloth will clean your Plasma Display. If cleaning beyond this is needed, please follow these guidelines
Inhaltszusammenfassung zur Seite Nr. 8
Introduction Introduction to the PD-4265/ PD-5065 Plasma Displays Contents of the Package Mitsubishi’s PD-4265/PD-5065 plasma displays are a Plasma display with tabletop stand and bottom speakers seamless blend of cutting-edge visual technology and Power cord sophisticated design. The displays sleek techno-art lines blend Remote control with two AAA Batteries in well with most environments. The displays crisp, vivid Owner’s guide image quality will transform data from any graphic medium
Inhaltszusammenfassung zur Seite Nr. 9
Contents MONITORLINK ...................................................... 22 Installation ...................................................... 1 Image Adjust Settings Menu .................................... 22 General Instructions .................................................. 1 Adjusting the Position, Size, Fine Picture, Picture Adj ...... 22 Ventilation requirements for enclosure mounting........... 1 Set Up Settings Menu.............................................. 23 How to use th
Inhaltszusammenfassung zur Seite Nr. 10
Installation General Instructions CAUTION This device needs to be attached to the supplied stand and speakers. When carrying, use the handles attached to the upper back of the display. (PD-5065) The speakers and stand are not consumer removable and should only be removed by a qualified dealer or installer. Minimum ventilation requirements How to use the safety metal fittings To allow heat to disperse, leave space between surrounding and the screws for safety metal fittings objects as shown on th
Inhaltszusammenfassung zur Seite Nr. 11
Part Names and Function Front View MENU/ENTER VOLUME LEFT/- RIGHT/+ INPUT/EXIT MENU/ENTER VOLUME LEFT/- RIGHT/+ INPUT/EXIT 6 5 4 3 2 1 q REMOTE SENSOR WINDOW t VOLUME and Receives the signals from the remote control. Adjusts the volume. Functions as the ADJUST (▼/▲) buttons in the On-Screen Menu mode. w POWER/STANDBY Indicator When the power is on ............................. Lights green. y MENU/ENTER BUTTON When the power is in the standby mode ... Lights red. Display the main menu or selec
Inhaltszusammenfassung zur Seite Nr. 12
COMPONENT 1 RGB2/COMPONENT2 MONITORLINK INPUT 2 INPUT 1 R/Cr/Pr G/Y B/Cb/Pb H V MONITORLINK CONTROL INPUT 3 Side View Rear View C D E F G H I AB A AC IN F RGB2 / COMPONENT2 Connect the included power cord here. COMP2: You can connect DVDs, High Definition sources, Cable Boxes, etc. B EXT SPEAKER L and R here. Maintain the correct polarity. The (positive) speaker This input can be set for use with an wire is connected to the EXT SPEAKER terminal RGB or component source. (see page and the (ne
Inhaltszusammenfassung zur Seite Nr. 13
y ADJUST (▲ / ▼ / / ) Remote Control Use these buttons to select items or settings and to adjust settings or switch the display patterns. u EXIT Press this button to exit the MAIN MENU. Press this button during the display of the sub menu to return to the previous menu. i MUTE Press this button to mute the audio. SLEEP INFO o VOLUME ( ) FORMAT Press this button to adjust audio volume. ADJUST !0 ZOOM ( ) Press this button to enlarge or reduce the image. !1 CONTRAST Press this button to adjus
Inhaltszusammenfassung zur Seite Nr. 14
Operating Range How to use the remote control * Use the remote control within a distance of about 7 m/ 23ft. from the front of the display’s remote control sensor Battery Installation and Replacement and at horizontal and vertical angles of up to approximately Insert the 2 “AAA” batteries, making sure insert them with 30°. the proper polarity. * The remote control operation may not function if the display’s remote control sensor is exposed to direct 1.Remove the remote control’s back cover by ge
Inhaltszusammenfassung zur Seite Nr. 15
MONITORLINK COMPONENT 1 RGB2/COMPONENT2 INPUT 2 INPUT 1 R/Cr/Pr G/Y B/Cb/Pb H V MONITORLINK CONTROL INPUT 3 Connections VCR or Laser Disc Player INPUT 1-3 To video inputs on the plasma display Document Camera DVD Player IBM VGA or Compatibles Macintosh or Compatibles (Desk top type) Monitor adapter for Macintosh (not included) To Mini D-Sub 15 pin connector on the plasma display Mitsubishi HD Receiver/Controller (i.e. HD-6000) Set Top Box 6
Inhaltszusammenfassung zur Seite Nr. 16
Connecting Your PC or Macintosh Computer Connecting Your VCR Connecting your PC or Macintosh computer to your plasma Use common RCA cables* (not provided) to connect your display will enable you to display your computer’s screen VCR to your plasma display. To make these connections, image for an impressive presentation. The plasma display simply: supports the signals described on pages 35-38. To connect a PC or Macintosh simply: 1. Turn off the power to your plasma display and VCR. 1. Turn off t
Inhaltszusammenfassung zur Seite Nr. 17
MonitorLink™ Connections Pin Assignments for D-sub HD15 pin MonitorLink and MonitorLink Control RGB (Analog) Connector 1. Connect a HDMI to HDMI cable from the MONLINK OUTPUT of a Mitsubishi HD-6000 Receiver/Controller 5 4 3 2 1 to the MONLINK input on the plasma display. A HDMI 10 9 8 7 6 15 14 13 12 11 to HDMI cable and a RS-232C cable are included in the HD-6000 accessory box. Pin No. Signal (Analog) 2. Connect the L (left) and R (right) audio terminals from 1 Red the Mitsubishi Receiver/Cont
Inhaltszusammenfassung zur Seite Nr. 18
Cable Management for PD-4265 Push in the cables. Align the Align the POWER CORD cables, and with the support. close the clamp. To attach 1. Support is attached. 2. 3. Clamp is attached. Cable Management Cover assembly To attach 1. 2. 3. 4. Cable Management Depending on cable thickness and number of cables, the Cable Management Cover might not close. mounting hooks In this case, please remove the Cable Management Cover. When Cable Management Cover is removed, please fasten cables to back p
Inhaltszusammenfassung zur Seite Nr. 19
Cable Management for PD-5065 Push in the cables. Align the cables to inside of Align the support. cables, and close the clamp. To attach 1. 2. 3. Clamp is attached. Support is attached. Cable Management Cover assembly To attach 1. 2. 3. 4. Cable Management Depending on cable thickness and number of cables, the Cable Management Cover might not close. mounting holes In this case, please remove the Cable Management Cover. When Cable Management Cover is removed, please fasten cables to back
Inhaltszusammenfassung zur Seite Nr. 20
Basic Operations POWER MUTE To turn the unit ON and OFF: To cancel the sound: Press the MUTE button on the remote control to cancel 1. Plug the power cord into an active AC power outlet. the sound; press again to restore. 2. Press the POWER ON button (on the remote control) INFO to turn on the unit. To check the settings: The monitor’s POWER/STANDBY indicator will light 1. The screen changes each time the INFO button is up (green) when the unit is on. pressed. 3. Press the POWER STANDBY button (
