Inhaltszusammenfassung zur Seite Nr. 1
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: To reduce the risk of electric shock do not remove cover or back. No
user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with The exclamation point within
arrow-head within a triangle a triangle is intended to tell
is intended to tell the user the user that important
that parts inside the product operating and servicing
are a risk of electric shock to instructions are in the papers
persons. with th
Inhaltszusammenfassung zur Seite Nr. 2
Important Safety Instructions Dear JVC Customer 1) Read these instructions. Welcome to the JVC family of customers. We hope that you will have many years of enjoyment from All the safety and operating instructions should be read before the appliance is operated. your new Plasma Display Monitor. 2) Keep these instructions. The safety and operating instructions should be retained for future reference. To obtain maximum benefit from your set, please read these Instructions before making any adj
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents FCC STATEMENT FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 Important Safety Instructions .......................................3 ASPECT Controls .........................................................22 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the FCC STATEMENT ...........................................................6
Inhaltszusammenfassung zur Seite Nr. 4
Safety Precautions Safety Precautions CAUTION WARNING This Plasma Display Monitor is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. Set up (All of the following accessories are manufactured by JVC) Do not place the Plasma Display Monitor on sloped or unstable surfaces. ................................................... Speakers TS-C5000SPG The Plasma Display Monitor
Inhaltszusammenfassung zur Seite Nr. 5
Accessories Remote Control Batteries Requires two AA batteries. Accessories Supplied 1. Turn the transmitter face down. 2. Install the batteries as shown in 3. Replace the cove and slide in Press and slide off the battery the battery compartment. reverse until the lock snaps. cover. (Polarity + or – must match the markings in the compartment). Operating Instruction book Remote Control Transmitter Batteries for the Remote EUR646526 Control Transmitter (AA(R6) Battery × 2) INPUT SURROUND VOL NR PI
Inhaltszusammenfassung zur Seite Nr. 6
Basic Controls Connections INPUT – VOL + R - STANDBY G POWER ON Main Power On/Off Switch Volume Adjustment Input button Push the Volume Up “+” or Power Indicator (VIDEO (S-VIDEO)/COMPONENT, Down “–” button to The Power Indicator will light. RGB/PC Mode Selection) increase or decrease the Power-OFF .... Indicator not illuminated (The unit Push the “INPUT” button to select sound volume level. VIDEO(S-VIDEO)/COMPONENT or will still consume some power as long as the RGB/PC input signal mod
Inhaltszusammenfassung zur Seite Nr. 7
Connections Connections How to connect the speakers How to connect the AV Input Terminals VIDEO signal connection When connecting the speakers, be sure to use only the optional accessory speakers. (VCR) Refer to the speaker’s Installation Manual for details on speaker installation. 1 Audio Video OUT OUT RL Video input to Speakers (Optional accessories) BNC socket VIDEO BNC video cable AUDIO 2 2×RCA audio cables 1 Audio input to L/R sockets (VCR) L AUDIO VIDEO S-VIDEO R Audio Video AV IN 2 OUT OU
Inhaltszusammenfassung zur Seite Nr. 8
Connections Connections How to connect the COMPONENT/RGB Input Terminals How to connect the PC Input Terminals Component signals (Y, PB, PR) connection COMPUTER DVD Player L AUDIO AUDIO PC IN VD HD PR/CR/R PB/CB/B Y/G R Audio DVD (Y,PB, PR) OUT COMPONENT/RGB IN RL OUT YPB PR POWER / INPUT – VOL + R - ST G PO ANDBY WER ON RCA-BNC adapter plug Conversion adapter (if necessary) D-sub 15p RGB Y, PB, PR PC cable 3×RCA video cables AUDIO Audio 2×RCA audio cables 1/8" (3mm) stereo plug Aud
Inhaltszusammenfassung zur Seite Nr. 9
Connections Power ON/OFF and Input Signal Selection How to connect the SERIAL Terminals Power ON/OFF The SERIAL terminal is used when the Plasma Display Monitor is controlled by a computer. Connecting the plug to the Wall Outlet COMPUTER Push the POWER switch on the Plasma Display Monitor to turn the set on POWER-ON 6 7 8 9 SERIAL Power Indicator: Green 14 2 3 5 Example: The screen below is displayed for a while after RS-232C cable the Plasma Display Monitor is turned on. (setting condition is a
Inhaltszusammenfassung zur Seite Nr. 10
Power ON/OFF and Input Signal Selection On-Screen Menu Display from Remote Control Select the Input Signal INPUT To PICTURE adjust menu Press the INPUT button to select the input video signal desired from equipment such as (see page 28) a VCR which has been connected to the PICTURE Plasma Display Monitor. NORMAL NORMALIZE PICTURE MENU STANDARD Input signals will change as follows: PICTURE 0 BRIGHTNESS 0 For COMPONENT INPUT (see page 30) COLOR 0 INPUT R - STANDBY INPUT — VOL + TINT 0 G
Inhaltszusammenfassung zur Seite Nr. 11
On-Screen Menu Display from Remote Control ASPECT Controls To SOUND adjust menu (see page 26) The Plasma Display Monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema SOUND To SIGNAL screen for VIDEO format picture. NORMAL NORMALIZE (see page 31) AUDIO MENU STANDARD BASS 0 [ ] SIGNAL VIDEO TREBLE 0 ASPECT ASPECT button ( ) BALANCE 0 3D Y/C FILTER NTSC ON The aspect mode changes each time the ASPECT button COLOR SYSTEM AUTO SURROUND ON is pre
Inhaltszusammenfassung zur Seite Nr. 12
ASPECT Controls Adjusting PICTURE POS./SIZE Picture Explanation Mode Adjusting screen NORMAL will display a 4:3 picture at its standard 4:3 4 NORMAL size. 1 ASPECT NORMAL 3 Press to select the screen mode to adjust (see page 23). INPUT 4 16 ZOOM mode magnifies the central section of the picture. SURROUND ZOOM PICTURE 2 POS. /SIZE ZOOM 3 9 Press to display the PICTURE POS./ VOL SIZE menu. N R Press to select H-POS/H-SIZE/V-POS/ FULL will display the picture at its maximum size but 4 16 FULL V-SIZ
Inhaltszusammenfassung zur Seite Nr. 13
Adjusting PICTURE POS./SIZE SOUND Adjustment “ ” “ ” When the Position Left button is pressed When the Position Right button is pressed Press the SOUND button to display the SOUND menu. 1 H-POS INPUT Select to adjust each item. 2 SURROUND Press to select the desired adjustment menu. VOL “ ” “ ” When the Position Left button is pressed When the Position Right button is pressed Select the desired level by listening to the sound. NR H-SIZE “ ” “ ” PICTURE SOUND SET UP When the Position L
Inhaltszusammenfassung zur Seite Nr. 14
SURROUND Controls PICTURE Adjustments PICTURE SURROUND SURROUND Button PICTURE 1 Press the PICTURE button on the The benefits of surround sound are enormous. You can be NORMAL NORMALIZE Remote Control to display the completely enveloped in sound; just as if you were at a concert STANDARD PICTURE MENU PICTURE menu. hall or cinema. PICTURE 0 BRIGHTNESS 0 COLOR 0 The surround setting switches on and off each time the TINT 0 INPUT Select to adjust each item. SURROUND button is pressed. 2 SHARPNESS
Inhaltszusammenfassung zur Seite Nr. 15
PICTURE Adjustments SET UP for Input Signals Notes: Item Effect Adjustments (1) “COLOR” , “TINT” and “SHARPNESS” COMPONENT/RGB IN SELECT Selects the proper brightness and settings cannot be adjusted for “RGB” PICTURE density for the room. Less More and “PC” input signal modes. Select to match the signals from the source connected to the COMPONENT/RGB input terminals. (2) You can change the level of each Adjusts for easier viewing of dark pictures Y,
Inhaltszusammenfassung zur Seite Nr. 16
SET UP for Input Signals SET UP for Input Signals Select SIGNAL from the “SET UP” menu during RGB or PC input signal mode. COLOR SYSTEM / AUTO SIGNAL [ COMPONENT ] Press to select each item. Select SIGNAL from the “SET UP” menu during VIDEO (S-VIDEO) input CLAMP POSITION SET UP signal mode. (“SIGNAL [VIDEO]” menu is displayed.) COMPONENT/RGB-IN SELECT Press to adjust. SIGNAL [ RGB ] RGB Press to select the “COLOR SYSTEM” or SIGNAL SYNC H & V OSD LANGUAGE ENGLISH (US) “AUTO”. PULL-IN RAN
Inhaltszusammenfassung zur Seite Nr. 17
Troubleshooting Specifications Before you call for service, determine the symptoms and make a few simple checks as shown below. GD-V500PZU Power Source 120 V AC, 50/60 Hz Symptoms Checks Power Consumption Picture Sound Normal use Max. Amps 5.5 A Stand-by condition 2.4 W Electrical Appliances Power off condition 0.7 W Cars/Motorcycles Fluorescent light Plasma Display panel Drive method AC type Interface Noisy Sound 50-inch, 16:9 aspect ratio Contrast Ratio 3000:1 2 Volume Brightness Capability (P
Inhaltszusammenfassung zur Seite Nr. 18
Specifications GD-V500PZU Accessories Supplied Remote Control Transmitter EUR646526 Batteries 2 × AA Size Optional Supplied Speakers TS-C5000SPG Stand Unit TS-C50P1G Wall Mounting Unit TS-C50P6G Wall Mounting Unit TS-C50P2G (angled) Ceiling Suspension Unit TS-C50P3G Dimensions 47.6” (1210mm) × 28.5” (724 mm) × 3.9” (98mm) (W × D × H) 3.9" (98 mm) 47.6" (1210 mm) POWER / R - ST G POWER ON ANDBY INPUT — VOL + Weight (Mass) approx. 99.2 lbs (main unit only) approx. 109.3 lbs (with spea
