Inhaltszusammenfassung zur Seite Nr. 1
PANTONE COLOR 432 U PANTONE COLOR 432 U
Inhaltszusammenfassung zur Seite Nr. 2
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the i
Inhaltszusammenfassung zur Seite Nr. 3
DECLARATION OF CONFORMITY For the following product : All of Digital sigange HYUNDAI IT provides Manufactured at : (factory name, address) 1. Hyundai IT Corp. 1229 In-ri, Apo-eup Gimcheon, Gyeongsangbuk-do 740-860 Rep. of Korea 2. Hyundai IT Corp. San 136-1 Ami-ri, Bubal-eub, Ichon-si, Kyungki-Do, 467-860 Rep. of Korea We herewith confirmed to comply with the requirements set put in the Council Directive on the Approximation of the Lows of the Member States relating to Electromagnetic Compat
Inhaltszusammenfassung zur Seite Nr. 4
DIGITAL SIGNAGE Contents Major features ...............................................................................................2 Safety Information ........................................................................................2 Be sure to understand ..................................................................................5 Check the product list ...................................................................................6 Proper location for product installation
Inhaltszusammenfassung zur Seite Nr. 5
DIGITAL SIGNAGE This product has been designed to enable the user ease of use, and display information Major features effectively and conveniently. • TFT LCD Module adopted D320ML(I/G) / D400ML / D420ML(I/G/P/T) / D460ML(I/G/P/T/H) / D468ML(I/G/P/T/H) / D460SL(I) : 1366 x 768 WXGA (HD) D405ML(I/G) / D407ML(I/G/P/T) / D425ML(I/G/P/T)/ D465ML(I/G) / D467ML(I/G/P/T) / D525ML(I/G) / D825ML(I/G) / D525SL(I) / D705ML(I/G) / D705SL(I) / D825SL(I) : 1920 x 1080 WUXGA (Full HD) • Vivid digital color
Inhaltszusammenfassung zur Seite Nr. 6
DIGITAL SIGNAGE - The main plug of the power supply cord shall remain readily operable. - An apparatus with CLASS I construction shall be connected to a Mains socket outlet with a protective earthing connection. - Make sure that the power cord and other cables are correctly plugged in. - Plug the power cord correctly into the end, do not wobble/jiggle, it may cause electric shock fire. - Do not touch the power cord with wet hands, it may cause electric shock. - Overloaded AC outlets a
Inhaltszusammenfassung zur Seite Nr. 7
DIGITAL SIGNAGE - Do not hang on or jump to the product or mounting rack. - When the product is left unused for a long time, be sure to unplug the power cord. - In the case of damage or br eakage do not attempt to self repair, please contact local service engineer. - For D460SL(I), D525SL(I), D705ML(I/G), D705SL(I), D825SL(I), install the product on the flat surface and secure the wheels not to move itself or fall down. - For D460SL(I), D525SL(I), D705ML(I/G), D705SL(I), D825SL(I), make
Inhaltszusammenfassung zur Seite Nr. 8
DIGITAL SIGNAGE Be sure to understand Image quality of the product CAUSE Due to the nature of LCD's property, Afterimage can occur. Afterimage appears when identical frames / images are displayed continuasly. If displayed for prolonged periods of time this can become permanent. PREVENTION When you display a freeze frame for a long time, lower the brightness and contrast (Brightness, 70/ Contrast, 80). Also it can be prevented by using moving frame. COUNTERMEASURES Temporary
Inhaltszusammenfassung zur Seite Nr. 9
DIGITAL SIGNAGE Please check the following components provided with the product after you open the box. Check the product list Remote control & batteries Power Cord Base Frame Type User's manual D-SUB Cable HDMI to DVI Cable (Option) HDMI cable RS232C Cable (Option) Kiosk Type (Landscape) Kiosk Type (Portrait) please check the following components provided with the product after you open ! the box and contact the dealer if any missing. ** The contents may vary depending on models and sometime
Inhaltszusammenfassung zur Seite Nr. 10
DIGITAL SIGNAGE 1. Locate the product at least 30cm away from the electric appliance or heating product. Please check the following components provided with the product after you open the box. Proper location for Check the product list 2. The product must be placed at least 10cm away from the wall and ground. product installation 3. Keep the product out of direct ray of light and locate screen not to be reflected by the sunlight. 4. Make sure the mounting rack firmly tightened before ins
Inhaltszusammenfassung zur Seite Nr. 11
DIGITAL SIGNAGE Title and function of each 1 Remote control receiving sensor. 5 M enu button : to display menu or exit from the menu. 2 Power display LED red-stand by/ Green-working. 6 select button. part 3 ~ 0 OSD button. 7 To move down in OSD menu. 3 Power button ; to turn the power on or off. 8 T o move up in OSD menu. Control Panel 4 Input selection button : to select other connected 9 To move left and control the volume down in OSD menu. device. 0 To move right and control the
Inhaltszusammenfassung zur Seite Nr. 12
DIGITAL SIGNAGE Terminal panel AC IN PC D-SUB OUT COMPONENT OUT (Y Pb Pr) 1 7 # AC POWER SWITCH UPGRADE CVBS IN 2 8 $ HDMI IN PC AUDIO IN CVBS OUT 3 9 % HDMI OUT RS-232C OUT COMPONENT AUDIO IN (L R) 4 0 ^ SPEAKER OUT RS-232C IN COMPOSITE AUDIO IN (L R) 5 ! & PC D-SUB IN COMPONENT IN (Y Pb Pr) 6 @ $ ^ 1 2 5 8 0 @ 3 4 6 7 # % & 9 ! ** The locations of connectors may vary depending on models. - The items no. 12–17 are optional items. - When you select the "Source"button on the remote con
Inhaltszusammenfassung zur Seite Nr. 13
DIGITAL SIGNAGE Remote control 1 To turn the power on or off. 1 2 Move up in OSD menu. 2 3 To move left or control the volume down in OSD menu. 4 3 4 To move right or control the volume up in OSD menu. 6 5 To move down in OSD menu. 5 7 6 Select in OSD menu. 9 7 Display the menu screen. 8 8 Close the menu screen. 9 Convert the input signal. How to insert batteries 1 2 3 Pull while pressing at rear lid. Insert the batteries into proper polarities Use after the lid closed. (+,-). 10/36 DID
Inhaltszusammenfassung zur Seite Nr. 14
DIGITAL SIGNAGE How to Connecting Kiosk PC or Source (Satellite receiver, Camcorder etc.) 11/36 DID_eng.indb 11 2009-09-15 오후 8:24:24 English
Inhaltszusammenfassung zur Seite Nr. 15
DIGITAL SIGNAGE How to Connecting Digital RGB(HDMI) 1 2 1. Please ensure that the power to the device is switched off, then connect each cable one after another before restoring power. when connect HDMI to HDMI cable 1 when connect DVI to HDMI cable 2 – must utilize device with DVI signal output from peripheral device 2. Connect the power code to the product. 3. Turn on the power of the product and peripheral device. Screen shows up within 10 seconds. 4. Select "HDMI" input b
Inhaltszusammenfassung zur Seite Nr. 16
DIGITAL SIGNAGE Support timing for Horizontal frequency Vertical frequency NO Resolution HDMI (KHz) (Hz) 1 480p 640 x 480p 60 2 576p 720 x 576p 50 3 720p 1280 x 720p 50 / 60 4 1080i 1920 x 1080i 50 / 60 5 640 x 480 31.47 59.94 6 640 x 480 37.88 60.32 7 1024 x 768 48.36 60 1. Please ensure that the power to the device is switched off, then connect each cable one 8 1360 x 768 47.70 60 after another before restoring power. 9 1360 x 768 64.00 60 when connect HDMI to HDMI cable 1 10 1600
Inhaltszusammenfassung zur Seite Nr. 17
DIGITAL SIGNAGE How to Connecting analog RGB (PC D-SUB) 1. Please ensur e that the power to the device is switched off, then connect each cable one after another before restoring power. 2. Connect D-SUB to D-Sub cable. Then tighten the scr ew of the cable after connecting PC D-SUB. 3. Connect the power cord to the product. 4. Turn on the power of the product and PC . The screen will appear within 10 seconds. 5. Select "PC" input by pressing "SOURCE" on OSD button or remote control. – HDMI
Inhaltszusammenfassung zur Seite Nr. 18
DIGITAL SIGNAGE Support timing for PC Horizontal frequency Vertical frequency NO Resolution (KHz) (Hz) 1 640 x 480 31.47 59.94 2 800 x 600 37.88 60.32 3 1024 x 768 48.36 60.00 4 1360 x 768 47.71 60.00 5 1280 x 1024 64.00 60.00 6 1600 x 1200 75.00 60.00 7 1920 x 1080 67.50 60.00 ! 5, 6 and 7 are only for Full HD 15/36 DID_eng.indb 15 2009-09-15 오후 8:24:25 English
Inhaltszusammenfassung zur Seite Nr. 19
DIGITAL SIGNAGE How to Connecting the component (Option) 1. Please ensure that the power to the device is switched off, then connect each cable one after another before restoring power. 2. Connect the component cables to Y, Pb, and Pr correctly. Connect BNC cable and tighten. 3. Connect the power cord to the product. 4. Turn on the power of the product and peripheral device . The screen will appear within 10 seconds. 5. Select "COMPONENT" input by pressing "SOURCE" on OSD button or
Inhaltszusammenfassung zur Seite Nr. 20
DIGITAL SIGNAGE Support timing for Horizontal frequency Vertical frequency NO Resolution component & AV (KHz) (Hz) 1 0i 0 x 0i 5. / 60 60 x 0p 5. / 60 0p 0 x 0p 5. / 60 3 56i 0 x 56i 50 56p 0 x 56p 50 5 0p 10 x 0p 5. / 60 / 50 6 100i 10 x 100i 5. / 60 / 50 100p 10 x 100p 60 / 50 ! 7 is only for Full HD 1/36 DID_eng.indb 17 2009-09-15 오후 8:24:25 English
