Bedienungsanleitung Haier R-Series HL32R1

Inhaltszusammenfassung zur Seite Nr. 1

Haler °
TFT-LCD TV
OWN E R'S MAN UAL
Please READ this manual carefully before
operating yourTV, and retain itfor future
refe re nc e
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii,,,
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
HL42XR1
HL32R1
HL26R1
HL42XK1
HL32K1
HL26K1
HL32XK1

Inhaltszusammenfassung zur Seite Nr. 2

Warning The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK The exclamation point within an equilateral triangle is DO NOT REMOVE COVER (OR BACK). intended to alert the user to the presence of important NO USER SERVICEABLE PARTS INSIDE. REFER SER

Inhaltszusammenfassung zur Seite Nr. 3

Safety Instructions FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no

Inhaltszusammenfassung zur Seite Nr. 4

Safety Instructions SAY T TRUCTIO Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember torecord the modeland serial number. Theyare on label in back ofthe unit. Model number serial number Date of purchase Staple your receipt to your manual. You will need it to obtain warranty service. 4 TV LCD-TFT

Inhaltszusammenfassung zur Seite Nr. 5

Introduction Contents Video Menu Warning .......................................... 2 How to selectpicture mode .................................. 21 Safety Instructions ............................ 3 How to customizeyour own picturestatus ............. 21 introduction VGA Set ..................................... 22 Co nt ro Is ......................................... 6 Audio Menu Connection Options .............................. 7 How to selectaudio mode .....................................

Inhaltszusammenfassung zur Seite Nr. 6

Introduction Controls / s sas np fed represe taro of e /Vfro t pa e sdepa e co fro butte sa dsde puts TV Side pa_se/c©nt_"els and cen_'_ectiens /- H L26R 1/H Lg2R 1/H L42XR 1 ............ I ,![! ® _ ® r _ ® @ '_) -- O _../ ..................... (_) 8 /% ii g- '_.j @ r- °<_ _ , 2 + Fs \l ..................... (_) o ,¢_

Inhaltszusammenfassung zur Seite Nr. 7

Introduction Connection Options ® ® '\ / ©L I DVl AUDIO © fh ,\ j, ® © Y Pb Pr L-AUDIO-R VGA AUDIO VGA © i L-AUDIO -R L-AUDIO -R S-VIDEO L-AUDIO-R J ©® ® @@ @ @ 1. Digital Audio Output: Connect vat ous types ef d@tat asdo equipment NOTE: In standby mode, these ports will not work. 2. DVi Audio In: Whet/ s '/(_ _/©Y:/to H©F_ _sdapter;connect the {_udo si{_n_sto these iacks 3. Antenna Input: Connect cable or antenna signals to the TV, either directly or through your cable box. 4. HDMI In: Co nect

Inhaltszusammenfassung zur Seite Nr. 8

Introduction Universal Remote control The remote control cannot be operated unless the batteries are properly loaded. When using the remote control, aim it atthe remote sensor on the TV. 1 .POWER Function introduction Press to turnon and off the TV. 2.TV DVD SETBOX CABLEVCRAUD To select one of the system modes in which the remote control can be used. O .......... 3.PICTURE Press repeatedly tocycle through theavailable picture modes. 4. AUDIO Press to cyclethrough differentsound settings. 5.INPUT

Inhaltszusammenfassung zur Seite Nr. 9

Installation Accessories .@ i Haier= __o Q (_ TFT=LCD TV OWNER'S MANUAL Remote control Owner's manual Alkaline battery(AAA) x 2 Antenna Connection [Vrece/) o (u_!_ y w depe d o you _!_te _!_ y/)e _!_te _!_ oc_!_to _!_d _!_te _!_ l) s o _ Multi-family Dwellings/Apartments (Connect to waltantenna socket) Wall Antenna Socket Bronze Wire / RF Coaxial Wire(75 ohm) I VHF Antenna _ Turn clockwiseto tighten UHF Antenna Bronze Wire Single-family Dwellings/Houses (Connect to walt jack for outdoor antenna)

Inhaltszusammenfassung zur Seite Nr. 10

Installation External Equipment Connections NOTE: All cables shownare not includedwith theTV. Choose Your Connection There are several ways to connect your television, depending on the components you wantto connectand the quality of the signal you want to achieve. The following are examplesof some different ways toconnect your TVwith differentinput sources. Connecting aVCR Toavoid picture noise(interference), leave anadequate distance between theVCR andTV. Connection Option 1 Set VCRoutput switc

Inhaltszusammenfassung zur Seite Nr. 11

nstaltation Externa| Equipment Connections External A/V Source Setup How to connect Connect the audio and video cables from the external equipment's output jacks to the TVinput jacks, as shown in the figure. When connecting the TVto external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio @@@@ Right = red). 0 0 C:: @@@@ O How to use Pb Pr L-AUD!O-R VGA AUDIO VGA 1. Select the input source with using the INPUT button on the remote control. 2. PressA/V button to sel

Inhaltszusammenfassung zur Seite Nr. 12

Installation Externa| Equipment Connections Connecting a DTV(digital TV) This TV can receive Digital Over-the-air/Cable signals withoutan external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p, 1080i). How to connect UsetheTV'sCOMPONENT,VGAorHDMI jack forvideo connections, dep

Inhaltszusammenfassung zur Seite Nr. 13

Installation Connecting a computer Howtoconnect 1. To getthe bestpicture quality, adjustthe VGAgraphics card to 1024x768. 2. Usethe TV'sVGAor DVI (Digital Visual lnterface)Audio IN port foraudio connections, depending on your computer connector. II If the graphic card on the computer does not output analog and digital RGBsimultaneousty, connect only one of either VGAIN or HDMI IN todisplay the VGAon theTV. !11If the graphic card on the computer does output analog and digital RGB simultaneously,

Inhaltszusammenfassung zur Seite Nr. 14

Installation Externa| Equipment Connections HDMI and DVI input When the source device(DVD player or SetTop Box) supports HDMI How To Connect 1. Connect thesource device toHDMI portof thisTV withan HDMI cable(notsupplied with thisproduct). 2. No separated audio connection is necessary. How To Use If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p. If the source device does not support Auto HDMI, you need to set the o

Inhaltszusammenfassung zur Seite Nr. 15

Installation Cable sample o. \\\\ \ HDMI Cable (not supplied withthe product HDMI to DVl Cable (not supplied withthe product Analog Audio Cable (Stereo to RCA type) (not supplied withthe product Owner's Manual 15

Inhaltszusammenfassung zur Seite Nr. 16

Installation Connecting Headphones You can connecta set of headphones to your set if you wish to watch a TV programme withoutdisturbing the otherpeople in theroom. Plug a setof headphones intothe 3.5mm mini-jack socket onthe side panetof the set. t Power source AC Outlet TOUSEAC POWERSOURCE Wider Hole Use theAC polarized line cord provided for and Blade operation onAC. Insert theAC cordptug into a standard potarizedAC outlet. Polarized AC Cord Plug 16 TV LCD-TFT

Inhaltszusammenfassung zur Seite Nr. 17

Installation Removing the table stand and installing a wall mount bracket HL26R1 Use 4X M6 screws to secure the wall Remove 4X M4 screws securing the stand to the TV, then remove the stand. bracket (not supplied)to the backof yourTV. HL32R1 Use 4X M6 screws to secure the wall Remove 6X M4 screws securing the stand to the TV, then remove the stand. bracket (not supplied)to the backof yourTV. HL42XR1 Remove 5X M4 screws securing the Use 4X M5 screws to secure the wall stand to the TV, then remove

Inhaltszusammenfassung zur Seite Nr. 18

Operation Operation In the manual, the OSD (on screen display) may be different fromyour TV's, because it is just an exampleto help you with theTV operation. There are several options you might need to set up in order for yourTVtoworkproperly. Read the instructions that follow. Initial Setup: Set according to the screen display. Switching On/Off the TV set 1. First, connect power cord correctly. 2. Select the viewing source by using INPUT button on the remote control. 3. When finished usingthe T

Inhaltszusammenfassung zur Seite Nr. 19

Operation Channe| menu II This TV set has two methods to set channels, which are respectively Channel Scan, Channel Skip. II In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV to set channel. Note The Channel menu will beontyoperated in normaITVmode. _ Video Tuner Antenna 4b Channel Scan Channel Scan [_Db j_-:}>) Audio Channel Skip [_Db 1. Press MENU button and then use A/Y button to select O. Channel menu. Function 2. Pressl_ or ENTER

Inhaltszusammenfassung zur Seite Nr. 20

Operation Select the desired program 1. Using CH+/- buttons. II Press CH+ button to select a channel number in number increasing direction. II Press CH- button to select a channel number in number decreasing direction. Note If skip is ON on one channel, press CH+/- button, the channel will not appear. 2. Also can enter channel number directly, eg:2-0. Select the desired sound Press VOL-/+ buttons on the remoteor the front of the TV set to adjust the volume level. The range is 0-100. Volume ] 3O