Inhaltszusammenfassung zur Seite Nr. 1
LCD TV
OWNER`S MANUAL
MODELS: L26A16
L32A16
L37A16
L42A16
L26A18
L32A18
L37A18
L42A18
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
Inhaltszusammenfassung zur Seite Nr. 2
Congratulations on your purchase, and welcome to the "" family ! Dear Haier product owner: Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Haier "" family, you`re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. Thanks for investing in a Haier p
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. 1. Retain these Instructions ---the safety and operating instruc
Inhaltszusammenfassung zur Seite Nr. 4
Important Safety Instructions a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have been fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require
Inhaltszusammenfassung zur Seite Nr. 5
Table of Contents Warning ............................................. 1 Picture Adjustment ................................. 22 Important Safety Instructions................ 2Sound ................................... Adjustment 23 Buttons and interface location.............. 5 Time setting............................................ 25 Front control panel............................ 5 Function menu........................................ 26 Rear control panel............................
Inhaltszusammenfassung zur Seite Nr. 6
VIDEO R AUDIO L Buttons and interface location -This is a simplified representation of front panel. -Here shown may be somewhat different from your TV. Front control panel TV/AV MENU VOL- VOL+ Video AV2 CH- Audio R Audio L CH+ CH- CH+ VOL- VOL+ TV/AV MENU 1. CH+/- : program minus and plus, menu options. 2. VOL+/-: volume decrease and increase, menu reset and entry. 3. TV/AV: all input source display. 4. MENU: menu display. 5. Remote control signal receive window. 6. POWER and in
Inhaltszusammenfassung zur Seite Nr. 7
Buttons and interface location Rear Control panel Power Cord Socket Antenna Input This TV operates on AC DVD/DTV Input Connect cable or antenna signals power. The voltage is (Component ) PC VIDEO Input to the TV, either directly or through indicated on the Connect a component Connect the monitor your cable box. video/audiodevice to Specifications page. output connector from these jacks. Never attempt to operate a PC to the jack Audio input Earphone jack: the TV on DC power. for li
Inhaltszusammenfassung zur Seite Nr. 8
Remote control Inserting Batteries 1.Slide open the 2.Load two AA alkaline 3.Replace the cover of the cover of the battery batteries in the compartment. battery compartment. compartment on the paying attention to the polarity back of the remote diagram in the battery controller. compartment.(plus and minus poles to respective mark) Precautions Make sure that two AA alkaline batteries As strong light may interfere the are loaded. The batteries must be of the signals, change you
Inhaltszusammenfassung zur Seite Nr. 9
Keys of remote control - The remote controller cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction STILL I/II (NICAM) Picture static SLEEP PIP(No available) Displaying sleep time, Power Off/Standby adjustable any other programmed MUTE STILL MUTE equipment off. Switches the sound on or off SLEEP PIP DISPLAY SCAN SCAN Program scan button DISPLAY Display ON/OFF ABC@ DEF Digits GHI$ MNO J
Inhaltszusammenfassung zur Seite Nr. 10
Remote control Effective range -Here showns may be somewhat different from your TV, is only the graphic solution, please take material object as. above 20 20 45 right 45 below left front 8m Ensure the remote control is pointed toward the remote control window on the display. No obstacles should be placed between the remote control and the remote control window. The effective receiving scope for the signal is 8 meters to the front of the OO remote control window, and 45 to the left or
Inhaltszusammenfassung zur Seite Nr. 11
External Equipment Connections Antenna Connection Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different. Mixer outdoor additional antenna purchase Antenna input 75 standard coaxial type ANT IN 75 coaxial cable 300 twin-lead cable Plug Antenna adapter (additional purchase) Note * It is recommended that you'd better use 75 coaxial cable to
Inhaltszusammenfassung zur Seite Nr. 12
External Equipment Connection NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. Choose the connection which is best for you. VCR connection - To avoid picture noise (interference), leave an adequate distance between the VCR And TV. 1. Connect the SCART cab
Inhaltszusammenfassung zur Seite Nr. 13
External Equipment Connections DVD connection How to connect 1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the HDTV IN jacks on the TV and connect the DVD audio outputs to the HD-AUDIO jacks on the TV, as shown HD-AUDIO Y Pb/Cb Pr/Cr in the figure. IN2 SCART2 SCART1 P C / D V I ANT IN Y/C R G B AUDIO IN IN1 2. If your DVD only has an SCART output Y P b / C b P r / C r HD-AUDIO jack, connect this to the SCART input on the TV. as shown in the figure. How to use 1. Tur
Inhaltszusammenfassung zur Seite Nr. 14
External Equipment Connections PC connection How to connect another resolution, change the refresh rate to another rate or adjust the 1. To get the best picture quality, adjust the PC brightness and contrast on the menu graphics card to ( 1024x768),60Hz. until the picture is clear. If the refresh 2. Use the TV`s PC IN port for video rate of the PC graphic card can not be connections, depending on your PC changed, change the PC graphic card or connector. consult the man
Inhaltszusammenfassung zur Seite Nr. 15
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. Note Prolonged use of headphones at a high volume may damage your hearing. ANT IN You will not receive sound from the speakers when you connect headphones to the system. Power source TO USE AC POWER SOURCE Use the AC polar
Inhaltszusammenfassung zur Seite Nr. 16
Set up your TV -There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow. -In the manual, the OSD(on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation. Switching ON/OFF the TV set 1 first, connect power cord correctly and the power indicator will light . 2 If the indicator is lighting in red, press the digit buttons or CH+/- button on the remote controller aga
Inhaltszusammenfassung zur Seite Nr. 17
Tuning menu This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Automatic search 1 Press MENU button and then use CH+/- button to select the TUNING menu. MENU 2 Press VOL+/- button and then use CH+/- PICTURE Tuning Program button to select Country, and use VOL+/- AUDIO Country England ADJ
Inhaltszusammenfassung zur Seite Nr. 18
Tuning menu Manual search If excessive channel signals of unwanted programs are received in local area, manual search function is recommended. 1 Press MENU button and then use CH+/- button to select the TUNING menu. MENU PICTURE Tuning Program 2 Press VOL+/- button and then use CH+/- button to AUDIO Country England ADJUST Auto Search select Tuning Program. TUNING Program Table FUNCTION TIMER 3 Press VOL+/- button to enter the submenu. 4 Press CH+/- button to select Manual
Inhaltszusammenfassung zur Seite Nr. 19
Tuning menu Program Table 1 Press MENU button and then use CH+/- button to select the TUNING menu. MENU 2 Press VOL+/- button and then use CH+/- PICTURE Tuning Program AUDIO button to select Program Table. Country England ADJUST Auto Search TUNING Program Table FUNCTION 3 Press VOL+/- button to enter the submenu. TIMER You can press CH.LIST button again to enter the submenu. 4 Press CH+/- button to select the edited Program Table channel, and press button corresponding to
Inhaltszusammenfassung zur Seite Nr. 20
Tuning menu If the colour of some channel is abnormal Usually this should be set in the auto position. However if the colour displayed on the screen are incorrect, you can manually select the correct colour system. 1 Press MENU button and then use CH+/- button to select the TUNING menu. MENU 2 Press VOL+/- button and then use CH+/- button to select Program Table. PICTURE Tuning Program AUDIO Country England ADJUST Auto Search 3 Press VOL+/- button to enter the submenu. TUNING
