Inhaltszusammenfassung zur Seite Nr. 1
DIGITAL LED LCD TELEVISION
INSTRUCTION MANUAL
Model: LET32T1000HF
LET42T1000HF
LET39Z18HF
LET46Z18HF
Please read this manual carefully before operating the unit, and keep it
for future reference.
Inhaltszusammenfassung zur Seite Nr. 2
Contents Contents How to Adjust Volume.......................................................15 Safety Warnings 2 Adjusting Picture Settings................................ 15 Welcome ............................................................... 2 Changing the Picture Setting .........................................15 Important Information........................................ 2 Adjusting Sound Setting................................... 16 Changing the Sound Setting ........................
Inhaltszusammenfassung zur Seite Nr. 3
Safety Warnings Safety Warnings Welcome Thanks for buying this 32"/39"/42"/46" Full HD Digital LED LCD TV. This guide will help you to set up and begin using your TV. En Firstly, check the contents of your box with the parts checklist below: 32"/39"/42"/46" Full HD Digital LED LCD TV Remote control AAA battery ×2 Instruction Manual Warranty TV Stand Screws for TV stand Component audio adapter Cover bottom Now you can get started! Important Information READ ALL INSTRUCTIONS BEFORE USE
Inhaltszusammenfassung zur Seite Nr. 4
Safety Warningss Do not locate the product close to water or oil(ie, cooking oil or lubricating oil), which may cause fire hazards. EN-3 Digital LED LCD Television Instruction Manual
Inhaltszusammenfassung zur Seite Nr. 5
Safety Warnings En Digital LED LCD Television Instruction Manual EN-4
Inhaltszusammenfassung zur Seite Nr. 6
Aboutyour LED LCD TV About Your LED LCD TV Installing the Stand Only 32"42" LED LCD Model (Put your TV on the table with its rear cabinet facing upwards.) 1. Put the stand on the TV set 2. Screw the stand in the positions with the screws supplied (4 x B4 x 16). Screws:4xB4X16 EN-5 Digital LED LCD Television Instruction Manual
Inhaltszusammenfassung zur Seite Nr. 7
About your LED LCD TV Installing the Stand Only 39"46" LED LCD Model (Put your TV on the table with its rear cabinet facing upwards.) En 1. Put the rear board on the stand neck, and fix the rear board with the screws supplied (4 x B4 x 12F). Back Front Screws: 2xB4X12F Screws: 2xB4X12F 2. Put the rear board on the rear cabinet of TV, and fix the rear board with the screws supplied (4 x M4 x 14). Screws: 4xM4X14 Digital LED LCD Television Instruction Manual EN-6
Inhaltszusammenfassung zur Seite Nr. 8
About your LED LCD TV Front Control Panel 32" 42" 39" 46" 1 2 3 4 5 6 7 Toggles between all the available input 4 CH- TV channel down. 1 INPUT sources. 5 VOL+ Press to increase the volume. MENU Press to select the main menu. 2 6 VOL- Press to decrease the volume. 3 CH+ TV channel up. 7 POWER EN-7 Digital LED LCD Television Instruction Manual
Inhaltszusammenfassung zur Seite Nr. 9
About your LED LCD TV Rear Terminals Control En 13 12 11 10 9 8 7 HDMI1 IN HDMI2 IN HDMI3 IN PC AUDIO SCART 1 2 3 4 5 6 1 HDMI1 IN input 7 YPbPr input 2 HDMI2 IN input 8 AV input 3 HDMI3 IN input 9 ANTENNA input 10 COAXIAL 4 PC input 11 USB PC input 5 Common Interface AUDIO 12 6 SCART input 13 Earphone output Digital LED LCD Television Instruction Manual EN-8 YPbPr VIDEO R-AUDIO-L ANT IN COAXIAL USB COMMON INTERFACE
Inhaltszusammenfassung zur Seite Nr. 10
About your LED LCD TV Get to Know Your Remote Control When using the remote control, aim it towards the remote sensor on the TV. POWER 1 No Function 2 No Function 3 Picture Mode 4 5 Sound Mode 6 Display Information abc def 7 Sleep Button 8 DTV Audio/NICAM ghi jkl mno 9 Screen Button pqrs tuv wxyz 10 Channel List 11 Display or Close Subtitle 12 Numerical Keys 13 Source 14 Q.View 15 Volume Selection 16
Inhaltszusammenfassung zur Seite Nr. 11
About your LED LCD TV Refer to the DVD player user guide for operating Connecting Your TV instructions. Antenna Connection Connect your aerial to the back of the TV into the ANTENNA IN socket. En DVD Improve Your Signal To improve picture quality in a poor signal area, use a signal amplifier (not supplied). Connect a DVD Player or VCR to Your TV Connect Your PC to the TV There are two ways in which you can connect a DVD player or VCR to your TV. Make sure that both the TV and You can use your
Inhaltszusammenfassung zur Seite Nr. 12
About your LED LCD TV Do not throw away the battery with common domestic Preparation of Your according to local regulation. Remote Control Getting Started Battery Installation Setting up Place the remote control face down, then open the cover of the battery compartment. Location You will need to place your TV near your plug socket (so the power cable can comfortably reach) and within reach of your aerial socket or extension lead. Connection Install two AAA batteries. (The + and - symbol of t
Inhaltszusammenfassung zur Seite Nr. 13
Getting Started HOME MODE Auto Search (Antenna or Cable) Press button to select HOME MODE and press OK button to enter the Language menu. Press MENU button. Press button to select language and press OK button to enter the Country menu. Press button to select Tuning , press button Press button to select Country and press to enter. OK button to enter the Tuner mode menu. Press button to select Tuner MODE and press OK button to enter the Channel Scan menu. En Press button to select Tuner
Inhaltszusammenfassung zur Seite Nr. 14
lect Enter Select Exit Getting Started Once a channel is located, you can press OK button Press EXIT button to stop auto search during to save it. searching. Press EXIT button to exit. Note It may take a few moment to complete the Auto Search. Analog Manual Search Press Menu button to exit DTV search ,ATV search will go on. Follow the below steps when you need a manual search. Press MENU button , Press button to select Digital Manual Search(Cable) Tuning , press button to enter. Press butt
Inhaltszusammenfassung zur Seite Nr. 15
Getting Started Press button to select the number position you want to remove to, press OK button to con rm. Skip You can press the EXIT button to cancel the changes Press MENU button. at anytime. Press button to select Tuning , press OK button to enter. Edit En Press button to select Channels . Press OK button to enter the sub-menu. Press button to select Edit . Press OK button to enter the sub-menu. Press button to select Skip . Press button to Press Ok button to enter the menu you want
Inhaltszusammenfassung zur Seite Nr. 16
Getting Started Insert the CAM correctly, then Smart Card to the CI Using Your TV slot that is located at the side of the TV. CI Slot How to Select the TV Program CAM Smart Card Using Program number button Enter the channel number with the number keypad on the remote control. Using P+/P- button. Turn on the TV and it will display the below message Press the P+/P- button to select a channel number. if the CA module is detected. Wait for few moments until the card is activated. How to Adjust Vo
Inhaltszusammenfassung zur Seite Nr. 17
Getting Started MPEG NR MENU button to return to the previous menu. To adjust the level of MPEG NR.Press button to Mode Medium or strong. This will select the picture mode. Select Standard/ Active Contrast /User/Vivid/Eco/Cinema/sport according to the program. To adjust the level of luminance of the picture. You can quickly select the desired mode by P.MODE Press button to set Active Contrast as On / Off. button on the remote control. En Brightness Adjusting Sound This will adjust the ligh
Inhaltszusammenfassung zur Seite Nr. 18
Getting Started SPDIF Type Language This will control the SPDIF Type. To select the menu language. Press button to select SPDIF Type. Screen Mode Press button to set SPDIF Type. As OFF, Auto,PCM. To set the picture proportion, press button to select Auto/16:9/4:3/Zoom1/Zoom2 . You can SPDIF Delay quickly select the desired mode by SCREEN button on To adjust the sound to make the video and audio the remote control. playing at the same time. This func tion ac tives
Inhaltszusammenfassung zur Seite Nr. 19
Getting Started Time Subtitle Type Press OK button to enter the submenu. Press button to set Subtitle Type as Normal and Hearing Impaired. Teletext To set the mode of Teletext. Digital Teletext Language En To adjust the default digital Teletext language. Decoding Page Language To adjust the decoding page language. Auto Synchronization: Press button to Audio Language to set the time manually. Audio Language 1st Date: Press button to select the position and Press button to set Audio La
Inhaltszusammenfassung zur Seite Nr. 20
Getting Started HOTEL SETTING System Lock Press MENU button and press1,0,0,1,0,8 button to enter Press button to select System Lock. the menu: Press button to set On or Channel B Lock Press button to select the channel you want to lock. Parental Guidance Press button to select parental lock. Press button to select OFF or 4-18 to limit the age of children who will watch TV. Hotel Mode Operation: Clear ALL Turn on/off the Hotel Mode. Press button to select Clear Lock mode. Max Volum
