Inhaltszusammenfassung zur Seite Nr. 5
DX-LDVD22-10A_09-0042.book Page 1 Monday, March 9, 2009 1:17 PM 1 CHILD SAFETY It makes a difference how and where you use your flat panel display As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committ
Inhaltszusammenfassung zur Seite Nr. 6
DX-LDVD22-10A_09-0042.book Page 2 Monday, March 9, 2009 1:17 PM 2 Important safety instructions 18 The apparatus shall not be exposed to dripping or splashing, and Important safety instructions no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION RISK OF ELECTRIC Warnings SHOCK Electric shock hazard DO NOT OPEN To reduce the risk of electric shock, do not remove any cover or expose the device to rain or moisture. No user-serviceable parts are inside. T
Inhaltszusammenfassung zur Seite Nr. 7
DX-LDVD22-10A_09-0042.book Page 3 Monday, March 9, 2009 1:17 PM Installing the stand 3 Attachments recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eia.org to Use only attachments recommended by Dynex. find a recycler in your area. Outdoor antenna grounding Non-active pixels If an outside antenna or cable system is connected to your TV, make sure The LCD panel contains almost 3 million thin film transis
Inhaltszusammenfassung zur Seite Nr. 8
DX-LDVD22-10A_09-0042.book Page 4 Monday, March 9, 2009 1:17 PM 4 TV components Removing the stand # Component Description To remove the stand from the stand column: 5 Press to turn on your TV. Press again to put POWER button your TV in standby mode. 1 Lay your TV face down on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched. 6 Power indicator Lights blue when your TV is turned on. Lights red when your TV is in standby mode. 2 Adjust
Inhaltszusammenfassung zur Seite Nr. 9
DX-LDVD22-10A_09-0042.book Page 5 Monday, March 9, 2009 1:17 PM TV components 5 Remote control ## Component Description 6 AUDIO IN jacks Connect the audio output (L and R) from an AV device to these jacks. For more information, see “Connecting a VCR” on POWER INPUT DVD OPEN/CLOSE page 8. CCD MTS/SAP SLEEP PICTURE 7 S-VIDEO jack Connect an S-Video device to this jack. S-Video does not carry an audio signal, so you will need to connect audio cables from the device to the AUDIO IN jacks. 1
Inhaltszusammenfassung zur Seite Nr. 10
DX-LDVD22-10A_09-0042.book Page 6 Monday, March 9, 2009 1:17 PM 6 Using the remote control # Button Description # Button Description 7 CH+/CH- Press CH+ or CH- to go to the next or 33 SETUP Press to open the DVD General Setup Page. previous channel in the channel list. For more Press twice to open the DVD Preference Page. VOL+/VOL– information, see “Selecting a channel” on 34 Press to go to the next chapter on a DVD. NEXT page 11. 35 Press to go to the previous chapter on a DVD. Press VOL+
Inhaltszusammenfassung zur Seite Nr. 11
DX-LDVD22-10A_09-0042.book Page 7 Monday, March 9, 2009 1:17 PM Making connections 7 Tips: Aiming the remote control • The brand name is often visible on the front of the universal remote To use the remote control: control, and the model number is often visible on the back. • Point the remote control towards the remote sensor on the front • If your universal remote control isn’t listed on the chart, refer to your of your TV. The remote control’s range is about 26 ft. (8 m). universal remot
Inhaltszusammenfassung zur Seite Nr. 12
DX-LDVD22-10A_09-0042.book Page 8 Monday, March 9, 2009 1:17 PM 8 Making connections 5 Select the channel you want with the remote control for the Connecting an antenna or cable TV cable box. To connect an antenna, cable TV, or satellite TV box: 1 Connect one end of a 75 ohm cable (not included) to the RF OUT jack on the antenna or on the cable or satellite TV box. Back of TV ANT/CABLE IN Multi-family dwellings or apartments Connect to wall antenna outlet. Wall antenna outlet
Inhaltszusammenfassung zur Seite Nr. 13
DX-LDVD22-10A_09-0042.book Page 9 Monday, March 9, 2009 1:17 PM Making connections 9 For a better picture, you can connect an S-Video cable to the To play from the HDMI device: 1 Turn on your TV, then press INPUT select HDMI. S-VIDEO Out jack on the VCR and to the S-VIDEO IN jack on your TV. 2 Turn on the HDMI device, and set it to the correct output mode. See the HDMI device’s user guide for more information. 4 Connect an audio cable to the AV AUDIO OUT jacks on the VCR. 5 Connect the othe
Inhaltszusammenfassung zur Seite Nr. 14
DX-LDVD22-10A_09-0042.book Page 10 Monday, March 9, 2009 1:17 PM 10 Turning on your TV for the first time 3 Connect an audio cable to the AUDIO OUT jack on the computer, • Press CH+/CH- to highlight Auto Channels Search, then then connect the other end of the cable to the PC AUDIO IN jack press ENTER/VOL+ The Auto Channels Search sub-menu on the back of your TV. opens. Note: The audio cable should have a stereo mini plug. PICTURE AUDIO CHANNELS SETTINGS To play video from a computer: Channe
Inhaltszusammenfassung zur Seite Nr. 15
DX-LDVD22-10A_09-0042.book Page 11 Monday, March 9, 2009 1:17 PM Understanding the basics 11 Notes: Understanding the basics Depending on the signal source selected, you may see different options on your screen. The above menus are shown in TV mode. Turning your TV on or off Menu items that are not selectable are grayed out. Menus in this manual To turn your TV on or off (standby mode): are described in TV mode, unless otherwise indicated. 1 Plug the power cord into an AC power outlet. 2 Pr
Inhaltszusammenfassung zur Seite Nr. 16
DX-LDVD22-10A_09-0042.book Page 12 Monday, March 9, 2009 1:17 PM 12 Adjusting the picture Digital sub-channels Displaying additional information A digital TV signal transmits more data than an analog signal. This To display additional information: increase in data provides a better picture and sound with less static and •Press INFO to show an information banner. The information interference. The increased data capacity also lets broadcasters fit banner shows current program information su
Inhaltszusammenfassung zur Seite Nr. 17
DX-LDVD22-10A_09-0042.book Page 13 Monday, March 9, 2009 1:17 PM Adjusting the sound 13 • Color Temperature–Select Warm (increased red), • Clock—Adjust the clock setting of the picture Normal, or Cool (increased blue). • Phase—Adjusts the focus of stable images • Backlight–Adjusts the overall brilliance of the screen. • Reset Computer Settings—Resets computer settings to • Noise Reduction–Selects the noise reduction mode to factory default reduce picture noise (snow). Choose High, Middle, 6
Inhaltszusammenfassung zur Seite Nr. 18
DX-LDVD22-10A_09-0042.book Page 14 Monday, March 9, 2009 1:17 PM 14 Changing channel settings • STEREO—Select this option for programs broadcast in All available channels are automatically preset in order. After the stereo. search is completed, the first channel number displays on the • SAP—Select this option to listen to a secondary audio screen. This search automatically adds only the active channels in program, if available. your area to the TV's memory. It deletes any channels on which
Inhaltszusammenfassung zur Seite Nr. 19
DX-LDVD22-10A_09-0042.book Page 15 Monday, March 9, 2009 1:17 PM Changing channel settings 15 Setting up a favorite channel list Adding or changing a channel label You can create a favorite channel list so you can quickly browse through If a channel is not already labeled, you can label the channel to make it your favorite channels by pressing FAVORITE, then selecting a channel easier to identify. You can also relabel a channel that is already labeled. from the favorite channel list. To labe
Inhaltszusammenfassung zur Seite Nr. 20
DX-LDVD22-10A_09-0042.book Page 16 Monday, March 9, 2009 1:17 PM 16 Changing channel settings 3 Press CH+ or CH– to highlight Audio Only, press ENTER/VOL+ Checking the DTV signal strength to open sub-menu, then press CH+/- to select On. You can check the DTV signal strength to determine if you need to 4 Press EXIT to close the menu. adjust your antenna or digital cable input. The higher the signal Notes: strength, the less likely you are to experience picture degradation. To check the DTV
Inhaltszusammenfassung zur Seite Nr. 1
DX-LDVD22-10A_09-0042.book Page 1 Monday, March 9, 2009 1:17 PM
22" LCD TV/DVD Combo
DX-LDVD22-10A
USER GUIDE
Inhaltszusammenfassung zur Seite Nr. 2
DX-LDVD22-10A_09-0042.book Page ii Monday, March 9, 2009 1:17 PM ii Dynex DX-LDVD22-10A 22" LCD TV/DVD Combo Contents CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Cautions . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 3
DX-LDVD22-10A_09-0042.book Page iii Monday, March 9, 2009 1:17 PM iii Turning on Auto Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Setting parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Changing parental control settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Setting or changing the password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
DX-LDVD22-10A_09-0042.book Page iv Monday, March 9, 2009 1:17 PM iv
