Inhaltszusammenfassung zur Seite Nr. 1
LCD TELEVISION
INSTRUCTION MANUAL
DLT-26C2
DLT-26C3
DLT-32C1
DLT-32C2
DLT-32C3
DLT-37C3
Inhaltszusammenfassung zur Seite Nr. 2
Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. T he lightning flash with arrowhead symbol, within an equilateral triangle, is in- tended to alert the user to the presence of uninsulated “dangerous voltage” with- in the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock. T he exclamation point w
Inhaltszusammenfassung zur Seite Nr. 3
Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain them safely for future reference. Follow all operations and instructions accordingly. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning Unplug the TV fr
Inhaltszusammenfassung zur Seite Nr. 4
Important Safeguards 13. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 14. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric
Inhaltszusammenfassung zur Seite Nr. 5
Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. Ignoring or disregarding the contents of this section and improper operation of the product may result in the person’s death or seri- WARNING ous injury. In case of an accident, please unplug the unit from the outlet immediately. To reduce the risk of electric shock, do not remove
Inhaltszusammenfassung zur Seite Nr. 6
Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. Ignoring or disregarding the contents of this section and improper operation of the product may result in the person’s death or seri- CAUTION ous injury. Please keep the user’s manual in a safe place for future reference. Do not put volatile substance-such as benzene, Do not spill
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents Installation and Maintenance Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Video Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Camcorder & Video Game Connection. . . . . . . . . . . . . . . . . . . . 14 DVD player/STB(Set Top Box) Connection . . . . . . . . . . . . . . . . . . 15 PC Connection . . . .
Inhaltszusammenfassung zur Seite Nr. 8
Supplied Accessories Make sure that the following accessories are provided with the product. MUTE POWER DVB/Analog AV MULTIMEDIA ABC DEF 123 GHI JKL MNO 456 PQRS TUV WXYZ 78 9 PICTURE 0 VOL PR MENU PR VOL OK/SELECT GUIDE SUB TITLE CANCEL/EXIT AC CORD STILL RECALL ASPECT EDIT SLEEP S.EFFECT MGDI AC cord Instruction manual Remote controller Microfiber Sheet (Only 32C1) Cable Holder (only 32C1, 26/32/37C3) Batteries Ferrite core Cover Bottom Ferrite core (32C1, 26/32C2, 26/32C3) (When you install
Inhaltszusammenfassung zur Seite Nr. 9
Supplied Accessories The method of wire arrangement (32C1, 26/32/37C3) 1. Assemble the cable holder enclosed on the back of TV (picture 1). (ASSEMBLY METHOD: After you push the ”A” (prominence part of cable holder) in the hole, rotate the cable holder clockwise as an angle of 90°. You can separate in reverse order of assembly.) 2. Open the cable holder (picture 2), you can open the cable holder that press and push “B” part. 3. After arrange lines with the cable holder, lock the ”B” agai
Inhaltszusammenfassung zur Seite Nr. 10
Antenna Connection Indoor Antenna Connection 1. Connect the feeder cable of the antenna to the combining adapter. WHEN THE IMAGE IS NOT CLEAR : Unclear screen image and bad reception may be a cause of wrong antenna con- nection. Be sure to check its direction and place when installing. 2. Connect the combining adapter to the antenna input at the left side of the TV set. WHEN USING THE COMBINING ADAPTER : You may obtain the combining adapter at your closest Service Center. Left side of the T
Inhaltszusammenfassung zur Seite Nr. 11
Antenna Connection CTV Antenna Connection Such community TV Antenna installation may be found in most of co-op apartments. When a coaxial cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right. Antenna socket on the wall Antenna socket at the left side of the TV set ANT/CABLE When a feeder cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right. Antenna socket on the wall Antenna socket at the lef
Inhaltszusammenfassung zur Seite Nr. 12
Antenna Connection Outdoor Antenna Connection Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses. Single Antenna Connection Antenna socket at the left side VHF Antenna of the TV set Back of the tv set UHF Antenna ANT/CABLE Separate Antenna Connection. VHF Antenna In case of coaxial cable In case of feeder cable ANT/CABLE UHF Antenna ANTENNA combining Adapter (Separate purchase) 12
Inhaltszusammenfassung zur Seite Nr. 13
Video Connection Connecting with an External Source You may connect an S-Video input to enjoy clearer and brighter picture images. You can make the connection with the AV3 input. Note : If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is recom- mended for better picture quality. Connecting with SCART VIDEO 1. Prepare the scart lead for picture / sound. 2. Connect the SCART input / output terminal of video with the SCART1(AV1), SCART2(AV2), input/o
Inhaltszusammenfassung zur Seite Nr. 14
Camcorder & Video Game Connection Watching the Camcorder Recording or Video Game on TV 1. Prepare the S-video and RCA connector. 2. These connectors connect to S-video or AV 3 as shown in the picture below. 3. Turn on the TV set and camcorder/video game. 4. Select AV3 or S-video mode, using the ”AV” button of the Remote controller or “ ” button of the TV set. Back of the tv set Camcorder Video game Note : If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connec
Inhaltszusammenfassung zur Seite Nr. 15
DVD player / STB (Set Top Box) connection When connecting with a component cable and Euro SCART cable Back of the tv set DVD Note : • When you connect with the component video, please check the colour of the cable between the DVD and TV set. When connecting with a S-VHS cable and RCA cable Back of the tv set DVD Note : I f your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is recom- mended for better picture quality. 15
Inhaltszusammenfassung zur Seite Nr. 16
DVD player / STB (Set Top Box) connection When connecting with a HDMI cable Back of the tv set Set Top Box When connecting with a component cable Back of the tv set Set Top Box Note : • When you connect with the component video, please check the colour of the cable between the Set Top Box and TV set. 16
Inhaltszusammenfassung zur Seite Nr. 17
PC Connection When connecting with PC(D-Sub) cable. 1. Adjust PC resolution to available resolution in LCD TV. 2. Connect between PC and TV set using the D-Sub and Audio cable like below the picture. 3. Turn on the PC and TV set. 4. Select PC mode by pressing ‘Multimedia’ button on the remote control or ” ” button of the TV set. Back of the tv set PC When connecting with a HDMI cable. 1. Adjust PC resolution to available resolution in LCD TV. 2. Connect between PC and TV set using the HDMI and
Inhaltszusammenfassung zur Seite Nr. 18
PC Connection PC CONNECTION NOTES: 1) The resolution of the TV set is the best at 1360 x 768 (WXGA). 2) If there is a [Vertical Frequency] setting menu in the [Screen] Menu of the PC, adjust the frequency to 60Hz. 3) If the PC resolution is too high, it may be hard to read letters. Select a suitable resolution. 4) HDMI input port receives only Digital Signal. 5) Depending on the graphic card when plug & unplug the HDMI connection, the screen may not display correctly. Restart the computer if t
Inhaltszusammenfassung zur Seite Nr. 19
Cable TV Broadcasting Connection External Input Connection Source Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver. You may make the connection to any of the Component input and SCART input AV1, AV2. Input Cable TV Broadcasting Station CATV Receiver Antenna Input Connection Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver.
Inhaltszusammenfassung zur Seite Nr. 20
Connect with the Dolby Digital AMP. If you connect the optical output to a Dolby digital AMP, you can listen to better sound. Optical output Dolby Digital AMP L Woofer Center R Surround L Surround R 20
