Inhaltszusammenfassung zur Seite Nr. 1
GB
LCD TELEVISION
INSTRUCTION MANUAL
DLT-19W4T
DLT-22W4T
DLT-20J1T
DLT-20J3T
DLT-20J9T
Helpline Number: 0870 100 2525
Inhaltszusammenfassung zur Seite Nr. 2
Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. T he lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi- cient magnitude to constitute the risk of an electric shock. T he exclamation p
Inhaltszusammenfassung zur Seite Nr. 3
Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain them safely for future reference. Follow all operations and instructions accordingly. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning Unplug the TV f
Inhaltszusammenfassung zur Seite Nr. 4
Impor tan t Safeguards 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, ex- treme care should be taken from touching such power lines or circuits as contact with them might be fatal. 13. Overloading Do not overload wall outlets and extension leads as this can result in a risk of fire or electric shoc
Inhaltszusammenfassung zur Seite Nr. 5
Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. Ignoring or disregarding the contents of this section and im- proper operation of the product may result in the person’s WARNING death or serious injury. In case of an accident, please unplug the unit from the outlet immediately. To reduce the risk of electric Do not put any object
Inhaltszusammenfassung zur Seite Nr. 6
Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. Ignoring or disregarding the contents of this section and improper operation of the product may result in the per- CAUTION son’s death or serious injury. Please keep the user’s manual in a safe place for future reference. Do not view the TV too close- Refer servicing to qualified ly
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents Installation and Maintenance Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Install Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Parts of the Remote Control . . . . . . . . . . . . . . . . . . . . . . . 10 Name of Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Preparation
Inhaltszusammenfassung zur Seite Nr. 8
Supplied Accessories Make sure that the following accessories are provided with the product. Remote control Instruction manual Batteries Cover Stand Base * 2 x 1,5V AAA Frame Stand * *) - Screws, Cover Stand Base and Frame Stand are only for DLT-19W4T and DLT-22W4T. For installing stand, see page 9.
Inhaltszusammenfassung zur Seite Nr. 9
Install Stand This page is only for DLT-19W4T and DLT-22W4T. 1. Insert Frame Stand into the Cover Stand Base and insert two screws (Ø3 x 12mm ) in the hole at the bottom of the stand and tighten. * Please insert two screws in the hole at the bottom of the stand. 2. Place the TV faced down on a soft cloth or cushion on a table and insert the assemble stand into the metal at the bottom of the TV. 3. Insert two screws (Ø4 x 14 mm) into the holes indicated and tighten.
Inhaltszusammenfassung zur Seite Nr. 10
Parts of the Remote Control 1. MUTE : Press this button, and the sound goes off. Press again, and the sound returns. 2. POWER : TV on/off button in STANDBY mode. 3. DVB/Analogue : Each time you press this button, the TV will toggle between DVB & RF Analogue. Also you can come back to the cur- rent TV mode from any External mode. 4. AV : Each time you press this button, the TV will cycle through: TV AV1 AV2 Component HDMI PC TV 5. SLEEP : Sleep Timer setting. SLEEP
Inhaltszusammenfassung zur Seite Nr. 11
Parts of the Remote Control 16. LANGUAGE (digital mode only): Moves to multi audio language selection. See page 31. 17. FAVOURITE (digital mode only): Moves to Favourites channel. See page 29. 18. PREV PR : Previous PROGRAMME button in TV mode. 19. MENU : Menu display button. 20. ASPECT : Selects the screen aspect ratio. See page 37. 21. NORMAL : The NORMAL button changes picture mode as follows: Normal Movie Favourite Dynamic Normal 22. RECALL : You can recall the present mo
Inhaltszusammenfassung zur Seite Nr. 12
Name of Each Part Front LED Indicator LED Indicator DLT-19W4T; DLT-22W4T DLT-20J1T; DLT-20J9T Remote Sensor Remote Sensor AV PR Up/Down Volume Up/Down Volume Up/Down PR Up/Down AV Menu Power On/Off Power On/Off Remote Sensor LED Indicator DLT-20J3T
Inhaltszusammenfassung zur Seite Nr. 13
Name of Each Part Rear DLT-19W4T / DLT-22W4T DLT-20J1T / DLT-20J3T / DLT-20J9T (1) Component (2) SCART sockets (3) HDMI inputs (4) Headphone jack (5) Audio Input (L+R) Socket (6) Video Input Socket (7) Digital Audio out coaxial (8) PC Input (9) PC Audio (10) CI socket (11) Aerial jack
Inhaltszusammenfassung zur Seite Nr. 14
Preparation Inserting Batteries into the Remote Control Unit To load the batteries, turn the remote control handset over and open the battery compartment. Insert the batteries (Two 1.5V, type R03 or AAA). Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment. Note: To avoid damage from possible battery leakage, remove the batter- ies if you do not plan to use the remote control handset for an ex- tended period of time. batteries Mains Connection 1.
Inhaltszusammenfassung zur Seite Nr. 15
Antenna Connection Aerial Connection CONNECTING THE TV DIRECTLY TO AN AERIAL Connect an aerial cable (75 ohm coaxial cable) to the Aerial terminal on the back of the TV set. DLT-20J1T / DLT-20J3T / DLT-20J9T Aerial Aerial terminal DLT-19W4T / DLT-22W4T Aerial cable
Inhaltszusammenfassung zur Seite Nr. 16
Antenna Connection Aerial connection with VCR/DVD Connect your aerial cable to the RF (aerial) IN terminal on the VCR/DVD. Connect the RF OUT terminal of the VCR/DVD to the Aerial terminal on the TV set with an RF cable. Note: If you wish to use only the Aerial (RF) connection, then you should store the VCR/DVD channel on pro- gramme number “ZERO” using the “Manual tuning” function (See page 25). If your VCR/DVD has this fa- cility. Now you can watch the VCR/DVD in TV mode by selecting the
Inhaltszusammenfassung zur Seite Nr. 17
External Equipment Connection External Equipment Connection When you connect with a component video cable, please check the colour of the cable between the DVD and TV set. Note: However this will only produce Video output. There- 1. The meaning of the component marking. fore you must ensure separate Audio cables are con- - ‘Y’ is a symbol for ‘Luminance’ nected to the PC AUDIO input. - Pb is a symbol for ‘Picture Blue’ or B-Y 3. Be sure that even if you
Inhaltszusammenfassung zur Seite Nr. 18
PC Connection When connecting with PC(D-Sub) cable. 1. First adjust resolution of the PC (refer to table in page 19). Using the PC’s original monitor. 2. Then disconnect your monitor from your PC and connect between PC and TV set using the D-sub and Audio ca- ble as shown in the picture below. 3. Turn on the PC and TV set. 4. Select PC mode by pressing the “AV” button on the remote control or ” ” button of the TV set. When connecting with a HDMI cable. 1. First adjust resolution of the
Inhaltszusammenfassung zur Seite Nr. 19
Multimedia Connection Notes Common notes finger or an object like a pen for a long time.It may cause - If you turn on the TV when the TV is cold, small „flicker- some temporary distortion effects on the screen. ing” phenomenon can happen. But this is normal and - Red, Green or Blue spots may appear on the screen. is no malfunction of LCD TV. But monitor performance is not effected. - Please do not touch or press the LCD screen with your PC Connection Notes - If possible please use the b
Inhaltszusammenfassung zur Seite Nr. 20
Digital Amp. Connection If you connect the coaxial output to a digital AMP, you can listen to surround sound, and output will be to the below table.
