Bedienungsanleitung Toastmaster PRO-OE3B3

Inhaltszusammenfassung zur Seite Nr. 1

TRANSMITTER PROGRAMMING GUIDE
Model : PRO-OE3B3
The transmitters included with the security system have been pre-programmed
at the factory, with each button pre-assigned to control a specific function of the
security system. Although the security system in the vehicle has either a 3 or 4
channel receiver, depending on the model, the transmitters included with the
system are capable of transmitting 7 distinct signals. This allows you to program
each transmitter to more than one vehicle in two car

Inhaltszusammenfassung zur Seite Nr. 2

PROGRAMMING THE TRANSMITTERS It is important to remember that during programming, each individual step of the procedure must be executed within 15 seconds of the previous step. When the 15 second time limit is allowed to expire, the system will automatically terminate the programming mode. This is indicated by a long chirp from the siren. NOTE: Some keyless entry systems will flash the interior light to indicate a stored code. Substitute the words light flash below where indicated sounding devic

Inhaltszusammenfassung zur Seite Nr. 3

14. Press and release the valet push-button switch once. 15. The dash LED will flash four times and the sounding device will beep four times, indicating the system is ready to accept programming for receiver's channel 4. 16. Press and hold any button combination as shown on the front cover of this guide until the sounding device emits a long beep, indicating the signal has been stored into memory. 17. If you have additional transmitters (up to 4) that need to be programmed, repeat step 16 for ea

Inhaltszusammenfassung zur Seite Nr. 4

ORDER FORM FOR 3 BUTTON TRANSMITTER MODEL NO. PRO-OE3B3 IMPORTANT : To help us expedite your order, please print all of the information legibly, and mail this form and your payment according to the instructions below. Note: Order Pad # 70 if your Lock & Unlock Icons are White Order Pad # 71 if your Lock & Unlock Icons are Red. Note: Transmitter model number found on back of case. ___________ 1. Name : ____________________________________________________ Address : ______________________________