Inhaltszusammenfassung zur Seite Nr. 1
COLOUR
TELEVISION
SP43L2HX
SP50L2HX
SP61L2HX
SP46L5HX
SP56L5HX
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE (PIP)
TELETEXT
Inhaltszusammenfassung zur Seite Nr. 2
Safety Instructions ENG ◆ Do not expose the television to extreme temperature conditions or to extreme humidity conditions. ◆ Do not expose the television to direct sunlight and other sources of heat. ◆ Do not expose the television to any liquids. ◆ Never put objects of any kind into the television, and do not place a water-containing vessel on the television. ◆ During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. ◆ Do not step on
Inhaltszusammenfassung zur Seite Nr. 3
ENG Contents ◆ FOREWORD ■ Safety Instructions......................................................................................... 2 ■ Caution .......................................................................................................... 2 ■ Replacing the Lamp....................................................................................... 5~6 ◆ CONNECTING AND PREPARING YOUR TELEVISION ■ Control Panel of Your Television.......................................................
Inhaltszusammenfassung zur Seite Nr. 4
ENG Contents (continued) ◆ USING YOUR TELEVISION ■ Adjusting the Sound Settings ........................................................................ 37 ■ Adjusting the Volume Automatically .............................................................. 37 ■ Setting the Dolby Pro Logic........................................................................... 38 ■ Adjusting Your Dolby Preferences................................................................. 39 ■ Setting the External Sound..
Inhaltszusammenfassung zur Seite Nr. 5
Replacing the Lamp (SP43L2HX/SP50L2HX/SP61L2HX) ENG 1 Use a screwdriver to remove the screw. 2 Remove the Lamp cover. 3 Use a screwdriver to remove the screws securing the Lamp. There are 2 screws: one on the up and one on the down. When the screws have been completely unfastened, they will still be connected to the body of the Lamp. 4 Separate the Lamp from the engine by holding the handle and pulling it out. 5 To reinstall the Lamp, follow these steps in reverse order. A Projection TV lamp i
Inhaltszusammenfassung zur Seite Nr. 6
Replacing the Lamp (SP46L5HX/SP56L5HX) ENG 1 Use a screwdriver to remove the screw. 2 Remove the Lamp cover. 3 Use a screwdriver to remove the screws securing the Lamp. There are 2 screws: one on the up and one on the down. When the screws have been completely unfastened, they will still be connected to the body of the Lamp. 4 Separate the Lamp from the engine by holding the handle and pulling it out. 5 To reinstall the Lamp, follow these steps in reverse order. A Projection TV lamp is a consu
Inhaltszusammenfassung zur Seite Nr. 7
Control Panel of Your Television The actual configuration on your TV may be different, depending on ➢ ENG your model. SP46L5/56L5HX a b c d LED Indicators e f SP43L2/50L2HX SP61L2HX a b a e b c c d d f e LED Indicators f ( a ) Input Source Selection ( d ) Volume Adjustment ( b ) Menu Display ( e ) Confirm your choice (Store or Enter) ( c ) Channel Selection ( f ) Power On/Off 7
Inhaltszusammenfassung zur Seite Nr. 8
Control Panel of Your Television (continued) ENG ( :On, :Blinking, :Off) TIMER LAMP STAND BY/TEMP Indication Standby mode. A timer pilot lights when Timer Auto On or Off is selected. Normal operation. Normal operation (when Timer Auto On or Off is selected). Lamp is warming up. The normal picture comes on after 25 seconds. The normal picture comes on after 25 seconds. (when Timer Auto On or Off is selected) Air vent cover in the rear of the TV is not properly installed. Inside temperature of th
Inhaltszusammenfassung zur Seite Nr. 9
Connection Panel of Your Television The actual configuration on your TV may be different, depending on ➢ ENG your model. Side of the TV SP43L2HX/50L2HX/61L2HX SP46L5HX/56L5HX a c b ( a ) Video Input a ( b ) Audio Inputs ( c ) S-Video Input b c Rear of the TV e j d b g i f a h c S-VIDEO 1 S-VIDEO 2 a) 75 Ω f) COMPONENT 1 / COMPONENT 2 Coaxial connector for Aerial or Cable Video (Y/PB/PR) and audio (L/R) inputs for Network. Component. (480i/480p, 576i/576p, 720p, 1080i) b) MONITOR OUT / AV1 / AV2
Inhaltszusammenfassung zur Seite Nr. 10
Connecting to an Aerial or Cable Television Network ENG To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In the first three cases, connect the aerial or network input cable to the 75 Ω coaxial socket on the rear of the television. Rear of the TV 2 If you are using an indoor aerial, you may need to turn it when tuning your television until you obtain a picture tha
Inhaltszusammenfassung zur Seite Nr. 11
Connecting Additional Speakers ENG To take advantage of the surround sound system, connect additional speakers. The speaker terminals are located on the rear of the television: ◆ Two for the left-hand surround speaker (marked L) ◆ Two for the right-hand surround speaker (marked R) To improve the quality of the sound, connect the: ➢ ◆ Red wire to the red terminal ◆ Black wire to the black terminal Inserting the Batteries in the Remote Control You must insert or replace the batteries in the remote
Inhaltszusammenfassung zur Seite Nr. 12
Infrared Remote Control ENG POWER ON/OFF WHEN YOU PRESS A BUTTON , ‘ ’ APPEARS ALONG WITH SELECED MODE (TV, VCR, CATV, DVD OR STB) AND REMAINING BATTERIES ON LED PICTURE EFFEECT SELECTION PICTURE SIZE MAKE THE REMOTE CONTROL WORKS FOR TV, VCR, CABLE-BOX (CATV), DVD PLAYER, OR SET-TOP BOX (STB) DIRECT CHANNEL SELECTION SWITCH REPEATEDLY BETWEEN THE LAST TWO CHANNELS DISPLAYED ONE OR TWO-DIGIT CHANNEL SELECTION NEXT CHANNEL/ VOLUME INCREASE TELETEXT NEXT PAGE TEMPORARY SOUND SWITCH-OFF EXTERNAL I
Inhaltszusammenfassung zur Seite Nr. 13
Switching Your Television On and Off ENG The mains lead is attached to the rear of your television. 1 Plug the mains lead into an appropriate socket. The main voltage is indicated on the rear of the television ➢ TV and the frequency is 50 or 60Hz. 2 Press the “ I ” button (On/Off) on the side of the television. Result: The Standby indicator on the side of the television lights up. 3 Press the POWER() button on the remote control to switch the television on. Result: The programme that you were wa
Inhaltszusammenfassung zur Seite Nr. 14
Becoming Familiar with the Remote Control ENG The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Display the on-screen menu system The following table presents the most frequently used buttons and their functions. Button Viewing Function Menu Function Used to display the next - stored channel. Used to display the - previous stored channel. to Used to display the corresponding channels. For double digit channels, the second digit must be ➢ pushed immediately after the
Inhaltszusammenfassung zur Seite Nr. 15
Plug & Play Feature ENG When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following Plug & Play settings are available. Press ENTER to start Plug & Play. 1 If the television is in Standby mode, press the POWER() button Start Exit on the remote control. Result: The message Plug & Play is displayed. It flickers for a little while, and then the Language menu is Language automatically displayed. English 2 Select the appropriate l
Inhaltszusammenfassung zur Seite Nr. 16
Plug & Play Feature (continued) ENG If you want to reset this feature... 1 Press the MENU () button. Result: The main menu is displayed. 2 Press the † or … button to select Setup. Result: The options available in the Setup group are displayed. 3 Press the ENTER() button. 4 Press the † or … button to select Plug & Play. Press the ENTER() button. Result: The message Plug & Play is displayed. TV Setup 5 For further details on how to set, refer to the opposite page. Time √ √ Plug & Play √ √ Language
Inhaltszusammenfassung zur Seite Nr. 17
Storing Channels Automatically ENG You can scan for the frequency ranges available to you, (availability depends on your country). Automatically allocated programme TV Channel numbers may not correspond to actual or desired programme Area : Australia √ √ numbers. However you can sort numbers manually and clear any Auto Store √ √ channels you do not wish to watch. Manual Store √ √ Edit √ √ √ √ Fine Tune 1 Press the MENU ()button. Ch. Scan √ √ LNA : Off √ √ Result: The main menu is displayed. Mo
Inhaltszusammenfassung zur Seite Nr. 18
Storing Channels Manually ENG You can store up to television channels, including those received via cable networks. TV Channel Area : Asia/W.Europe √ √ When storing channels manually, you can choose: Auto Store √ √ Manual Store √ √ ◆ Whether or not to store each of the channels found Edit √ √ √ √ ◆ The programme number of each stored channel which Fine Tune Ch. Scan √ √ you wish to identify LNA : Off √ √ Move Enter Return 1 Press the MENU ()button. Result: The main menu is displayed. Manual Sto
Inhaltszusammenfassung zur Seite Nr. 19
Storing Channels Manually (continued) ENG 7 If you know the number of the channel to be stored, see the Manual Store following steps. Prog. Color System Sound System ◆ Press the œ or √ button to select Channel. 1 AUTO BG ◆ Press the † or … button to select C (Air channel) or S (Cable Channel Search Store channel). C -- 887MHz ? ◆ Press the √ button. œ œ √ √ Move Adjust Return ◆ Press the numeric buttons (0~9) to select indicate the required number. Manual Store If no sound or abnormal sound,
Inhaltszusammenfassung zur Seite Nr. 20
Skipping Unwanted Channels ENG ◆ Skipping unwanted channels You can exclude the channels of your choice from the channel TV Channel scan operation. When you scan through the stored channels, Area : Asia/W.Europe √ √ those that you have chosen to skip are thus not displayed. All Auto Store √ √ channels that you do not specifically choose to skip are Manual Store √ √ Edit √ √ displayed during scanning. √ √ Fine Tune Ch. Scan √ √ LNA : Off √ √ 1 Press the MENU () button. Move Enter Return Result: