Inhaltszusammenfassung zur Seite Nr. 1
2-684-953-11(1)
U
LCD Digital Colour TV
Operating Instructions
Before operating the TV, please read the “Safety
information” section of this manual.
Retain this manual for future reference.
KDL-46S2000 KDL-46S2010
KDL-40S2000 KDL-40S2010
KDL-32S2000 KDL-32S2010
KDL-32S2020 KDL-26S2000
KDL-26S2010 KDL-26S2020
For useful information about Sony products
© 2006 Sony Corporation
Inhaltszusammenfassung zur Seite Nr. 2
Introduction NOTICE FOR Thank you for choosing this Sony product. Before operating the TV, please read this manual CUSTOMERS IN THE thoroughly and retain it for future reference. UNITED KINGDOM Trademark information is a registered trademark of the DVB Project A moulded plug complying with BS1363 is fitted to this Manufactured under license from BBE Sound, Inc. equipment for your safety and convenience. Licensed by BBE Sound, Inc. under one or more of the Should the fuse in the plug su
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Start-up Guide 4 Safety information .....................................................................................................................7 Precautions .............................................................................................................................10 Overview of the remote ........................................................................................................11 Overview of the TV buttons and indicators................
Inhaltszusammenfassung zur Seite Nr. 4
Start-up Guide 1: Checking the 2: Connecting an aerial/ accessories VCR Connecting an aerial only Remote RM-ED005 (1) Size AA batteries (R6 type) (2) Coaxial cable Mains lead (Type BF) (1) (supplied) Coaxial cable (1) Mains lead (supplied) Cable holder (1) Connecting an aerial and VCR Support belt (1) and screws (2) To insert batteries into the remote Mains lead (supplied) RF lead (not supplied) Notes Observe the correct polarity when inserting batteries. Dispose of batteries in an environme
Inhaltszusammenfassung zur Seite Nr. 5
Start-up Guide 3: Bundling the cables 5: Selecting the language and country/ region 2 1 2 4: Preventing the TV 3,4 from toppling over 3,4 1 Connect the TV to your mains socket (220- 240V AC, 50Hz). 2 Press 1 on the TV (top side). When you switch on the TV for the first time, the Language menu appears on the screen. When the TV is in standby mode (the 1 (standby) indicator on the TV (front) is red), press "/1 on the remote to switch on the TV. 2 3 1 Continued GB 5
Inhaltszusammenfassung zur Seite Nr. 6
3 Press F/f to select the language 1 Before you start auto-tuning the TV, insert displayed on the menu screens, then press a pre-recorded tape into the VCR . connected to the TV (page 4) and start play back. The video channel will be located and stored on the TV during auto-tuning. If no VCR is connected to the TV, this procedure is not required. Go to step 2. 2 Select “OK”, then press . 4 Press F/f to select the country/region in The TV starts searching for all available digital which yo
Inhaltszusammenfassung zur Seite Nr. 7
It is strongly recommended that you use Sony accessories for safety reasons: Safety information – KDL-46S2000/KDL-46S2010/KDL-40S2000/ KDL-40S2010: Wall-mount bracket SU-WL51 Mains lead – KDL-32S2000/KDL-32S2010/KDL-32S2020/ Unplug the mains lead KDL-26S2000/KDL-26S2010/KDL-26S2020: when moving the TV Wall-mount bracket SU-WL31 set. Do not move the It is strongly recommended that you use the official Sony TV set with the mains wall-mount bracket to allow adequate air circulation an
Inhaltszusammenfassung zur Seite Nr. 8
Leave some space around the TV set. Otherwise, air- Do not touch the mains lead and the TV circulation may be inadequate and cause overheating, set with wet hands. Doing so may cause which may cause fire or damage to the TV set. electric shock or damage to the TV set. 30 cm Moisture and flammable objects 10 cm 10 cm 15 cm Do not let this TV set get wet. Never spill liquid of any kind on the TV set. If any liquid or solid object does fall through openings in the cabinet, do not operat
Inhaltszusammenfassung zur Seite Nr. 9
Lightning storms Corrosion For your own safety, do not touch any If you use this TV set near the seashore, salt may corrode part of the TV set, mains lead, or metal parts of the TV set and cause internal damage or fire. aerial lead during lightning storms. It may also shorten the life of the TV set. Steps should be taken to reduce the humidity and moderate the temperature Damage requiring service of the area where the TV set is located. If the surface of the TV set cracks, do not touch it un
Inhaltszusammenfassung zur Seite Nr. 10
Handling and cleaning the screen surface/cabinet of the TV set Precautions To avoid material degradation or screen coating degradation, observe the following precautions. LCD Screen Do not push on the screen, scratch it with a hard object, or throw anything at it. The screen may be damaged. Although the LCD screen is made with high-precision Do not touch the display panel after operating the TV set technology and 99.99% or more of the pixels are effective, continuously for a long per
Inhaltszusammenfassung zur Seite Nr. 11
Overview of the remote 1 "/1 – TV standby Switches off the TV temporarily and on from standby mode. 2 A/B – Dual Sound (page 24) 3 Coloured buttons In digital mode (page 16, 18): Selects the options at the bottom of the Favourite and EPG digital menus. In Analogue Text mode (page 14): Used for Fastext. 4 / – Info / Text reveal In digital mode: Displays brief details of the programme currently being watched. In analogue mode: Displays information such as current channel number and scr
Inhaltszusammenfassung zur Seite Nr. 12
Overview of the TV buttons and indicators 1 (page 20) 2 / – Input select/OK In TV mode (page 19): Selects the input MENU source from equipment connected to the TV sockets. In TV menu: Selects the menu or option, and confirm the setting. 3 2 +/-/ / Increases (+) or decreases (-) the volume. In TV menu: Moves through the options left ( ) or right ( ). 4 PROG +/-/ / In TV mode: Selects the next (+) or previous (-) channel. In TV menu: Moves through the options up ( ) or down ( ).
Inhaltszusammenfassung zur Seite Nr. 13
Watching TV Watching TV 3 Press the number buttons or PROG +/- to Watching TV select a TV channel. To select channel numbers 10 and above using the number buttons, enter the second and third digits 1 within two seconds. To select a digital channel using the Digital Electronic Programme Guide (EPG), see page 16. In digital mode An information banner appears briefly. The following icons may be indicated on the banner. : Interactive service is available (MHEG Digital Text) : Interactive serv
Inhaltszusammenfassung zur Seite Nr. 14
To access Digital Text To change the screen mode manually to Many broadcasters provide a Digital Text service. suit the broadcast Digital Text offers graphically rich contents, Press repeatedly to select Smart, 4:3, Wide, compared to Analogue Text. Zoom, or 14:9. Select a digital channel which provides Digital Text, then press /. Smart* When a broadcaster provides a dedicated Digital Text channel, select this channel to access Digital Text. To navigate through Digital Text, follow the in
Inhaltszusammenfassung zur Seite Nr. 15
Watching TV Tips Alternatively, you can set “Auto Format” to “On”. The TV will automatically select the best mode to suit the broadcast (page 25). You can adjust the position of the picture when selecting 14:9 or Zoom. Press F/f to move up or down (e.g., to read subtitles). Some characters and/or letters at the top and the bottom of the picture may not be visible in Smart mode. In such a case, you can select “Vertical Size” using the “Screen” menu and adjust vertical size to make it
Inhaltszusammenfassung zur Seite Nr. 16
Checking the Digital Electronic Programme Guide (EPG) * 1 In digital mode, press to display the Digital Electronic Programme Guide (EPG). 2 Perform the desired operation, as shown in the following table. Note Programme information will only be displayed if the TV station is transmitting it. Digital Electronic Programme Guide (EPG) * Please note that this function may not be available in some countries. To Do this Turn off the EPG Press . Move through the EPG Press F/f/G/g. Watch a current
Inhaltszusammenfassung zur Seite Nr. 17
Watching TV To Do this Set a programme to be displayed 1 Press F/f/G/g to select the future programme you want to automatically on the screen when it starts display. – Reminder 2 Press . 3 Press F/f to select “Reminder”. 4 Press to automatically display the selected programme when the programme starts. A c symbol appears by that programme’s information. Note If you switch the TV to standby mode, it will automatically turn itself on when the programme is about to start. Set the time and dat
Inhaltszusammenfassung zur Seite Nr. 18
Using the Favourite list * The Favourite feature allows you to select programs from a list of up to 8 channels you specify. To display the Favourite list, see “Navigating through menus” (page 20). Favourite list * Please note that this function may not be available in some countries. To Do this Create your Favourite list for the first time A message appears asking if you want to add channels to the Favourite list when you select “Digital Favourites” in the “MENU” for the first time. 1 Press
Inhaltszusammenfassung zur Seite Nr. 19
Watching TV Using the Tools menu Press TOOLS to display the following options when Viewing pictures from viewing pictures from connected equipment other than PC. connected equipment Options Description Power Saving See page 27. Switch on the connected equipment, then perform one of the following operation. Picture Mode See page 21. For equipment connected to the scart sockets using a Sound Mode See page 23. fully-wired 21-pin scart lead Auto Clock Set (in Allows you to switch to digital St
Inhaltszusammenfassung zur Seite Nr. 20
Using MENU Functions Navigating through menus “MENU” allows you to enjoy various convenient features of this TV. You can easily select channels or external inputs with the remote. Also, settings for your TV can be changed easily using “MENU”. 1 Press MENU to display the menu. 2,3 1 2 Press F/f to select an option. 3 Press to confirm a selected option. To exit the menu, press MENU. Menu Description Launches the Favourite list. For details about settings, see page 18. Digital Favourites (only in
