Inhaltszusammenfassung zur Seite Nr. 1
LCD colour TV KLV-L23M1
2-176-409-11(2)
LCD Colour TV
GB
Operating Instructions
Before operating the TV, please read the “Safety Information” section of this manual.
Retain this manual for future reference.
DE
Bedienungsanleitung
Lesen Sie vor der Inbetriebnahme des Fernsehgeräts bitte den Abschnitt
„Sicherheitsinformationen“ in dieser Anleitung. Bewahren Sie die Anleitung zum
späteren Nachschlagen auf.
FR
Mode d’emploi
Avant d’utiliser le téléviseur, lisez la section « Consignes de sécuri
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i.e. marked with or ) must be used. When an alternative type of plug is used it should be fitted with a 5 AMP fuse, otherwise the circuit should be protected by a 5 AMP fuse at the distribution board. If the plug supplied with this equipment has a d
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents Operating Instructions .........................................................................................................3 Safety Information .................................................................3 Other Functions Precautions .............................................................................8 Sleep Timer Function ...........................................................32 Screen Memo Function .......................................................
Inhaltszusammenfassung zur Seite Nr. 5
Operating Instructions Safety Information For Safety Mains lead Medical institutions Unplug the mains lead when moving the Do not place this unit in a place where unit. Do not move the unit with the medical equipment is in use. It may mains lead plugged in. It may damage cause malfunction of medical the mains lead and result in fire or instruments. electric shock. If the unit has been dropped or damaged, have it checked immediately by qualified service personnel. Installation Carrying I
Inhaltszusammenfassung zur Seite Nr. 6
Installation and Moving Ventilation Outdoor use Never cover the ventilation holes in the Do not install this unit outdoors. If the cabinet. It may cause overheating and unit is exposed to rain, it may result in result in fire. Unless proper ventilation is fire or electric shock. If the unit is provided, the unit may gather dust and get exposed to direct sunlight, the unit may dirty. For proper ventilation, observe the heat up and this may result in damage to following: the unit. Do not in
Inhaltszusammenfassung zur Seite Nr. 7
Power Sources Overloading Mains lead protection This unit is designed to operate on a 220– Pull out the mains lead by the plug. Do 240 V AC supply only. Take care not to not pull on the mains lead itself. connect too many appliances to the same mains socket as this could result in fire or electric shock. Wiring Unplug the mains lead when wiring cables. Be sure to unplug the mains lead for your safety, when hooking up. Mains Cleaning Do not use a poor fitting mains socket. Insert the Clean
Inhaltszusammenfassung zur Seite Nr. 8
Additional Safety Information Electric shock Broken glass Do not touch the unit with wet hands. Doing so may cause electric Do not throw anything at the unit. The screen shock or damage the unit. glass may explode by the impact and cause serious injury. Protruding location Oils Do not install the unit in locations where it may protrude. If you Do not install this unit in restaurants that use oil. Dust absorbing oil install the unit in the following locations, it may result in injury. may ent
Inhaltszusammenfassung zur Seite Nr. 9
LCD Screen Mains lead Although the LCD screen is made with high-precision If you damage the mains lead, it may technology and 99.99% or more of the pixels are effective, black result in fire or electric shock. dots may appear or bright points of light (red, blue, or green) Do not pinch, bend, or twist the mains may appear constantly on the LCD screen. This is a structural lead excessively. The core lines may property of the LCD panel and is not a malfunction. be exposed or cut, causing
Inhaltszusammenfassung zur Seite Nr. 10
Precautions Precautions concerning ventilation Leave space around the unit. Otherwise, adequate air-circulation may be blocked causing overheating, which may cause fire or damage to the unit. When installing the unit on the wall 30 cm 10 cm 10 cm Leave at least this much space. 10 cm When installing the unit using a stand 30 cm 10 cm 10 cm Leave at least this much space. Never install the unit as follows: Air circulation is blocked. Air circulation is blocked. Wall Wall 8 Precautions
Inhaltszusammenfassung zur Seite Nr. 11
Viewing the TV comfortably To view the TV comfortably, the recommended viewing position is from four to seven times the screen’s vertical length away from the TV. View the TV in moderate light, as viewing the TV in poor light taxes your eyes. Watching the screen continuously for long periods of time can also tax your eyes. Installing the unit Use the specified wall-mount bracket or stand. Do not install the unit in places subject to extreme temperature, for example in direct sunlight, o
Inhaltszusammenfassung zur Seite Nr. 12
Overview Checking the Accessories Supplied Remote Control Coaxial Cable (1): Size AA Batteries RM-Y1102 (1): (R6 Type) (2): Do not remove ferrite cores. Mains Lead Mains Lead (Type C-6) (1): (Type BF) (1): Use this mains lead if you use the Use this mains lead if you use unit outside the United the unit in the United Kingdom. Kingdom. Refer to “NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM” on page 1 when using this mains lead. This mains lead may not be supplied depending on the co
Inhaltszusammenfassung zur Seite Nr. 13
Overview of the TV Buttons and Indicators To open the front panel of your TV, pull down the hooks TV Front Panel of the panel just under the mark, and draw down the panel. Remote control sensor (Sleep) indicator GB (Power) switch and (Power/Standby) indicator PROG (Channel) +/– buttons 2 (Volume) +/– buttons (Input Select) button i (Headphones) jack Status of the indicators (Power/Standby) indicator lights up in green The power of the TV is on. (Power/Standby) indicator lights up in r
Inhaltszusammenfassung zur Seite Nr. 14
Overview of the Remote Control Buttons a Switching the TV to the standby mode: Press this button to temporarily turn off the TV and switch it to the standby mode (the (Power/Standby) indicator on the TV lights up in red). Press it again to switch on the TV from the standby mode. To save energy, we recommend switching the TV off completely when the TV is not in use. If no signal is received or no operation is performed in the TV mode for 10 minutes, the TV automatically switches to the stand
Inhaltszusammenfassung zur Seite Nr. 15
n Selecting channels: Press these buttons to select the next or previous channel. o Adjusting the TV volume: Press these buttons to adjust the volume of the TV. p Recording programmes on your VCR: If the VCR is selected, press this button to record programmes. q Selecting the TV mode: Press this button to switch off Teletext or video input. r Selecting a picture mode: Press this button repeatedly to change the picture mode. For more details, refer to “Picture Adjustment” on page 22. s Selecting
Inhaltszusammenfassung zur Seite Nr. 16
Installation Inserting Batteries into the Remote Control Make sure you insert the supplied batteries observing the correct polarity. Always remember to dispose of used batteries in an environmentally friendly way. Do not use different types of batteries together or mix old and new batteries. 14 Installation
Inhaltszusammenfassung zur Seite Nr. 17
Removing the Cable Covers 1 Push the hooks and draw the cable covers towards you. 2 Detach the cable covers from the hooks of the side of the TV. GB Installation 15
Inhaltszusammenfassung zur Seite Nr. 18
Connecting an Aerial and a VCR Use the supplied mains lead (Type C-6 or Type BF, see page 10). Use the supplied coaxial cable for aerial connection. Do not connect to the mains before all connections are complete. Connecting an aerial AC IN Connect the supplied mains Connect the supplied coaxial cable. lead (Type C-6 or Type BF). Connecting a VCR with an aerial AC IN VCR IN OUT Scart lead is optional. Connect the supplied mains lead (Type C-6 or Type BF). For more details regarding VCR
Inhaltszusammenfassung zur Seite Nr. 19
Attaching the Cable Covers Please attach the cable covers to the TV after connecting the cables. 1 Attach the cable covers to the hooks of the side of the TV. 2 While pressing the hooks, push the cable covers onto the TV until it clicks. GB Bundling the cables You can store the cables in the back of the TV. Put the cables from both sides together and secure them with the clip at the bottom. Clip Installation 17
Inhaltszusammenfassung zur Seite Nr. 20
Adjusting the viewing angle of the TV You can adjust the angle to avoid the reflection of light and get a better view of the TV. When you adjust the angle, make sure that the cables are not caught between the TV and the stand. If some of the cables get caught, divide them into two groups at the clip and pull them in the opposite direction to free them up. When adjusting the angle, hold the stand with your hand so that it does not come loose or fall off. Be careful not to catch your fingers
