Inhaltszusammenfassung zur Seite Nr. 1
2-681-874-11(1)
LCD Digital Color TV
Operating Instructions
KDL-26S2000 KDL-32S2000
KDL-40S2000 KDL-46S2000
© 2006 Sony Corporation
Inhaltszusammenfassung zur Seite Nr. 2
Owner’s Record The model and serial numbers are located at the rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. Contacting Sony If, after reading the following instructions, you have additional questions, service ® needs, or required technical assistance related to the use of your Sony TV, please visit our website or call one of the following numbers: http://www.sony.com/TVs
Inhaltszusammenfassung zur Seite Nr. 3
s Do not install the TV in a hot or humid WARNING NOTIFICATION place, or in a place subject to excessive To reduce the risk of fire or electric shock, do This equipment has been tested and found to dust or mechanical vibration. not expose this apparatus to rain or moisture. comply with the limits for a Class B digital s Avoid operating the TV at temperatures device, pursuant to Part 15 of the FCC Rules. below 41°F (5°C). These limits are designed to provide reasonable s If the TV is trans
Inhaltszusammenfassung zur Seite Nr. 4
Trademark Information TruSurround XT, SRS and ( ) symbol are trademarks of SRS Labs, Inc. Important TruSurround XT technology is incorporated under license from SRS Labs, Inc. Manufactured under license from BBE Sound, Inc. Safety Licensed by BBE Sound, Inc. under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. Macintosh is a trademark licensed to Apple Computer, Inc., registered in Instructions the U.S.A and othe
Inhaltszusammenfassung zur Seite Nr. 5
grounding conductors, location of antenna discharge unit, connection to USE grounding electrodes, and requirements for the grounding electrode. For the TV with a three-wire grounding type AC Antenna Grounding According to the National power cord plug (Class 1 unit) Electrical Code, ANSI/NFPA 70 This TV must be connected to an AC power socket outlet with a protective earthing connection. AC power cord Antenna lead-in wire If you damage the AC power cord, it may result in a fire or an electric
Inhaltszusammenfassung zur Seite Nr. 6
Objects and ventilation holes VENTILATION Never push objects of any kind into the TV through the The slots and openings in the TV are provided for necessary ventilation. cabinet slots as they may touch dangerous voltage points To ensure reliable operation of the TV, and to protect it from overheating, or short out parts that could result in a fire or an electric these slots and openings must never be blocked or covered. shock. Never spill liquid of any kind on the TV. Unless proper ventilat
Inhaltszusammenfassung zur Seite Nr. 7
Placing on a stable surface INSTALLATION When installing or removing, using the If you place the TV on an unstable surface, the TV may Wall-Mount Bracket, be sure to use qualified fall and cause injury or damage. contractors. Wall mount installation requires the use of a Wall-Mount Bracket. If not properly secured during installation or removal from the Wall-Mount Bracket, the Fall TV may fall and cause serious injury. Please Do not hang anything on the TV. use a qualified contractor when
Inhaltszusammenfassung zur Seite Nr. 8
SERVICING Damage requiring service If the surface of the TV cracks, do not touch the TV until you unplug the AC power cord. Otherwise electric shock may result. Servicing Do not attempt to service the TV yourself since opening the cabinet may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Replacement parts When replacement parts are required, be sure the service technician certifies in writing that he/she has used replacement parts sp
Inhaltszusammenfassung zur Seite Nr. 9
Contents Getting Started Welcome to the World of .............................................................................11 Connecting the TV .........................................................................................................11 Cable System or VHF/UHF Antenna System............................................................11 Cable Box/Digital Cable Box .....................................................................................12 Cable System and VHF/UHF Ant
Inhaltszusammenfassung zur Seite Nr. 10
Inhaltszusammenfassung zur Seite Nr. 11
Getting Started Getting Started TM Welcome to the World of Thank you for purchasing this Sony LCD Digital Color Television. This manual is for model KDL-26S2000, KDL-32S2000, KDL40S2000 and KDL-46S2000. Be sure to check the supplied accesories against the list on page 46. Connecting the TV To display clear crisp pictures, you must connect your TV correctly and select the correct Wide Mode to display the picture in the correct aspect ratio (see “Changing the Wide Screen Mode” on page 21). I
Inhaltszusammenfassung zur Seite Nr. 12
Getting Started Cable Box/Digital Use this hookup if s You subscribe to a cable TV system that uses scrambled or encoded Cable Box signals requiring a cable box to view all channels, and s You do not intend to hook up any other audio or video equipment to your TV. 75-ohm coaxial cable (supplied) Cable Rear of TV VHF/UHF input z To change channels using the cable box, set your TV to channel 3 or 4 depending on the cable box channel output. Auto Scan will fix the IN OUT channel automatic
Inhaltszusammenfassung zur Seite Nr. 13
Getting Started Getting Started Satellite Receiver and Cable/Antenna Satellite antenna Satellite Receiver cable CATV/Antenna VHF/UHF cable (supplied) HD/DVD IN VIDEO IN (1080i/720p/480p/480i) 1 3 4 5 S VIDEO S VIDEO Y OPTICAL OUT PB VIDEO (yellow) S VIDEO cable VIDEO PR AUDIO OUT(VAR/FIX) L (MONO) L AUDIO-L AUDIO AUDIO (white) R A/V cable R AUDIO-R (red) Rear of TV If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. Run the
Inhaltszusammenfassung zur Seite Nr. 14
Getting Started When Connecting to Optional Equipment Left side Rear 7 6 VIDEO 2 IN 4 RGB 1 R-AUDIO-L S VIDEO AUDIO VIDEO PC IN IN 2 L (MONO) 5 R AUDIO 0 HD/DVD IN VIDEO IN 3 qa (1080i/720p/480p/480i) 3 1 S VIDEO 4 5 Y OPTICAL OUT 6 PB VHF/UHF 9 VIDEO PR (VAR/FIX) AUDIO OUT L (MONO) L 7 qs AUDIO AUDIO 8 R R Item Description 1 VIDEO 2 IN Connects to the S VIDEO output jack on your camcorder or other video equipment that has S VIDEO S VIDEO. Provides better picture quality than composite video
Inhaltszusammenfassung zur Seite Nr. 15
Getting Started Getting Started Item Description 5 HDMI IN 6 HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital HDMI/ audio/video interface between this TV and any HDMI-equipped audio/video equipment, such R-AUDIO-L as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high-definition video, plus digital audio. If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN (with HDMI-to-DVI cable or adapter) jack,
Inhaltszusammenfassung zur Seite Nr. 16
Getting Started Installing the TV Preventing the TV Attaching the Support Belt from Toppling Over 1 Screw the support belt (supplied) to the TV stand with a wood screw (supplied). 2 Attach the support belt to the stand with the securing screw (supplied) using a coin, etc. 3 Adjust the length by pulling the support belt towards you while holding the TV stand. Be sure to take measures to prevent the TV from toppling over and causing injury. The supplied wood screw may not be used depending on
Inhaltszusammenfassung zur Seite Nr. 17
Getting Started Getting Started Bundling the You can bundle the connecting cables as illustrated below. Connecting Cables 1 2 3 Do not bundle the AC power cord with other connecting cables. Adjusting the This TV can be adjusted within the angles shown below. Viewing Angle of the TV Adjust the angle left and right (swivel) Top view 15° 15° 15° 15° Front When adjusting the angle, hold the stand with one hand to avoid slipping or tipping the TV. 17
Inhaltszusammenfassung zur Seite Nr. 18
Getting Started Setting Up the Channel List - Initial Setup After you finish connecting your TV, you need to run Initial Setup, which automatically sets up available channels. The Initial Setup screen appears when you turn on your TV for the first time. If you do not want to set up the channels at this time, you can do it later by selecting the Auto Program option in the Analog and Digital Setup settings (see pages 37 and 38). POWER 1 Press to turn on the TV. The Initial Setup screen appear
Inhaltszusammenfassung zur Seite Nr. 19
Basic Operations Basic Operations Remote Control Button Description 1 TV/VIDEO Press repeatedly to cycle through the video inputs. See page 32 on setting up the video input labels, 1 including the Skip function. 2 2 SLEEP Press repeatedly until the TV displays the time in minutes 3 (Off, 15, 30, 45, 60, 90 or 120) that you want the TV to remain 4 on before shutting off. To cancel Sleep Timer, press SLEEP 5 repeatedly until Sleep Off appears. 3 FREEZE Press once to display a frozen image of t
Inhaltszusammenfassung zur Seite Nr. 20
Basic Operations Button Description Program information in the guide is provided by the broadcasters. As a result, it may sometimes include qs only the channel number, without a program title or description. Using the Program Options Setting The Program Options setting allows you to customize the program settings on the currently tuned channel. Alternate Each program has a main video and audio Audio stream (the video or audio that you see or hear 6 (When when the channel is first tuned), a
