Bedienungsanleitung Garmin RINO 120

Inhaltszusammenfassung zur Seite Nr. 1

Mounting the Transducer On a Trolling Motor
Assembling the Transducer
I
1. Slide the large Cable Tie through slot on the Transducer Mount with the ridges of
1. Insert the Rubber Washer and Plastic Spacer
M
the band facing up until equal lengths extend on both sides of the mount. (For
O
in the transducer at the same time. DO NOT
J
cold water or heavy timber/debris areas, a metal 4-5” worm gear clamp is recom-
lubricate the Rubber Washer.
R
K
mended.)
Fishfi nder 120
2. Route the cable tow

Inhaltszusammenfassung zur Seite Nr. 2

Using the Adjustment Menu The Fishfinder 120 is able to display a variety of useful information about the ARROW KEYS underwater environment. Below are a few things the unit helps you see. The UP and DOWN ARROW keys are used to The Adjustment Menu allows direct access to the Fishfi nder 120 Water Depth select items on the Adjustment Menu and Setup settings most commonly changed while using the unit. The unit displays water depth and can provide a warning Operational Instructions menu. The LEFT