Inhaltszusammenfassung zur Seite Nr. 1
echo™ 100 and echo 150
owner’s manual
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Introduction ......................... 1 Manual Conventions .................. 1 Registering Your Device ............ 1 © 2011 Garmin Ltd. or its subsidiaries Contacting Garmin Product Support................................................................................................................. 1 All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage med
Inhaltszusammenfassung zur Seite Nr. 3
Introduction Contacting Garmin Product Support Introduction Contact Garmin Product Support if you have any questions about this product. WArnInG See the Important Safety and Product Information guide in the product box • In the USA, go to www.garmin.com/support, or contact Garmin USA by for product warnings and other important information. phone at (913) 397.8200 or (800) 800.1020. This manual includes information for the echo™ 100 and echo 150 • In the UK, contact Garmin (Europe) Ltd. by
Inhaltszusammenfassung zur Seite Nr. 4
Getting Started Configuring the Initial Device Settings Getting Started Before you can use the device the first time, you must configure a series of initial settings. You must also configure these settings when restoring Keys original factory settings. You can update each of these settings later. 1. Select a language. 2. Select the units in which to measure depth. 3. Select the units in which to measure temperature. 4. Select Done. Adjusting the Contrast 1. From the Sonar screen, select MENU >
Inhaltszusammenfassung zur Seite Nr. 5
Getting Started Setting the Beeper You can set when the device makes audible sounds. 1. From the Sonar screen, select MENU > Setup > Alarms > Beeper. 2. Select an option: • To have the device beep when you select an item and when an alarm is triggered, select On. • To have the device beep only when alarms are triggered, select Alarms Only. Turning On the Device Automatically You can set the device to turn on when power is applied. Otherwise, press to turn on the device. From the Sonar scree
Inhaltszusammenfassung zur Seite Nr. 6
Using the echo 100 and echo 150 Adjusting the range of the Depth Scale Using the echo 100 and echo 150 You can adjust the range of the depth scale that appears on the right side of the screen. This setting determines how deep the sonar will search for Sonar Screen returns. The sonar screen shows a full-view graph of sonar readings from a transducer. The depth scale ➊ indicated on the right of the screen shows 1. From the Sonar screen, select MENU > Range. the screen depth as the screen scrol
Inhaltszusammenfassung zur Seite Nr. 7
Using the echo 100 and echo 150 Adjusting the Zoom on the Sonar Screen Setting the Gain to Auto Automatically 1. From the Sonar screen, select MENU > Gain. You can adjust the zoom of the Sonar screen by selecting the span of the 2. Select an option: view and locking the screen to the contour of the water bottom. For example, • To display the sonar screen with higher sensitivity and to show if you select a span of 10 meters, the device will display an area from the weaker signals and more noi
Inhaltszusammenfassung zur Seite Nr. 8
Using the echo 100 and echo 150 Setting the Battery Voltage Alarm Selecting a Frequency for the echo 150 You can set an alarm to sound when the battery reaches a specified low When using a dual frequency transducer, you can select a frequency for the voltage. echo 150 Sonar screen when using a dual frequency transducer. 1. From the Sonar screen, select MENU > Setup > Alarms > Battery > NOTE: The echo 100 operates only at 200 kHz. On. You can show data from a 200 kHz sonar signal or data from a
Inhaltszusammenfassung zur Seite Nr. 9
Appendix Viewing System Information Appendix From the Sonar screen, select MENU > Setup > System > System Information. Specifications Specification Measurement Setting the Language Display 4 in. (102 mm) diagonal, 256 × 160 pixels, 1. From the Sonar screen, select MENU > Setup > System > Language. 8-level gray 2. Select the language. Temperature Range From 5°F to 158°F (from -15°C to 70°C) Compass Safe 10 in. (250 mm) Cleaning the Outer Casing Distance Frequency echo 100: 200 kHz Notice echo
Inhaltszusammenfassung zur Seite Nr. 10
Appendix Software License Agreement BY USING THE ECHO 100 OR ECHO 150, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited license to use the software embedded in this device (the “Software”) in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in G
Inhaltszusammenfassung zur Seite Nr. 11
Inhaltszusammenfassung zur Seite Nr. 12
© 2011 Garmin Ltd. or its subsidiaries Garmin International, Inc. st 1200 East 151 Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK Garmin Corporation nd No. 68, Jangshu 2 Road, Sijhih, Taipei County, Taiwan www.garmin.com January 2011 Part Number 190-01312-00 Rev. A Printed in Taiwan
