Inhaltszusammenfassung zur Seite Nr. 1
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 1
Note
●
External speakers(PSN5042) and stand(SMN5040) are sold
List of Parts
separately.
Once you have unpacked your PDP with WIRELESS HOME AV CENTER,
Accessories
check to make sure that you have all the parts shown here. If any piece is
missing or broken, call your dealer.
Wireless signal cable Speaker Cables
Antenna Cable
Remote Control/
(MD39-00108A) (BN39-00530A)
AAA Batteries (BN39-00333A)
(MD59-00355A)
Power Cord Owner’s Instructions
Ferri
Inhaltszusammenfassung zur Seite Nr. 2
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 2 Turning the PDP On and Off Press the POWER ON button on the remote control. The PDP will be turned on and you will be ready to use its features. You can also use the POWER ( ) button on the front of the PDP. You can use the POWER ON button to turn on the WIRELESS HOME AV CENTER. The WIRELESS HOME AV CENTER and the PDP each have their own respective POWER ON/OFF button, but when you turn off the PDP, the WIRELESS HOME AV CENTER will turn off als
Inhaltszusammenfassung zur Seite Nr. 3
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 3 Connecting the PDP to the WIRELESS HOME AV CENTER Connecting the PDP to the WIRELESS HOME AV CENTER Make sure your PDP, A/V receiver and WIRELESS 1 HOME AV CENTER are turned off and unplugged. Install the WIRELESS HOME AV RECEIVER onto 2 the bracket located at the top of the PDP’s rear panel, in the direction of the arrow (as illustrated). Connect the Wireless Signal cable from the WIRELESS SIGNAL INPUT Video Signal 3 and Audio/Control ports on
Inhaltszusammenfassung zur Seite Nr. 4
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 4 Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. Plug the antenna lead into the AIR terminal on the 1 WIRELESS HOME AV CENTER. Use the antenna cable included in the product package. Connecting Cable TV You can connect different cable systems to your WIRELESS HOME AV CENTER, including cable without a Cable box, and cable with a Cable box that des
Inhaltszusammenfassung zur Seite Nr. 5
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 5 Connecting a Camcorder WIRELESS HOME AV CENTER Camcorder Audio cable S-Video cable Video cable Connect a Video/Audio cable between the VIDEO or S-VIDEO / L - AUDIO - R jacks to the WIRELESS HOME AV CENTER and the VIDEO or S-VIDEO / AUDIO output jacks on the camcorder. (Note: For better video, use an S-VIDEO cable.) Please be sure to match the color coded input terminals and cable jacks. Connecting a DVD Player (480i, 480p) WIRELESS HOME AV CENT
Inhaltszusammenfassung zur Seite Nr. 6
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 6 Connecting a DTV Receiver (480i, 480p) WIRELESS HOME AV CENTER DTV Receiver Component cable Audio cable Connect the cable or antenna to the antenna input jack on the DTV receiver. 1 Connect the Y, Pb, Pr (COMPONENT) input jacks on the WIRELESS HOME AV CENTER 2 to Y, PB, PR output jacks on the DTV receiver using a component cable. Connect the AUDIO L/R(COMPONENT) input jacks on the WIRELESS HOME AV CENTER to the 3 AUDIO output jacks on the DTV re
Inhaltszusammenfassung zur Seite Nr. 7
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 7 Connecting to a second TV WIRELESS HOME AV CENTER TV Audio cable Video cable Connect the Video/Audio cables between TV out / L - AUDIO - R jacks on the WIRELESS HOME AV CENTER to VIDEO / L - AUDIO - R input jacks on the second TV. ● Please be sure to match the color coded input terminals and cable jacks. ● TV OUT works only for the AIR and Cable input sources. It does not work for the external input sources because of content protection. Conne
Inhaltszusammenfassung zur Seite Nr. 8
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 8 Operation Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the WIRELESS HOME AV CENTER (i.e., an antenna or a cable system). TV Channel Select Antenna : Air √ Auto Program √ 1 Add/Delete √ Press the MENU button. Press the ▲ or ▼ button to select “Ch
Inhaltszusammenfassung zur Seite Nr. 9
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 9 Remote Control Buttons Œ POWER ON button ˜ CH (Channel) / buttons Changes channels. Turns the PDP and WIRELESS HOME AV CENTER on. ¯ INFO button You have to turn on the PDP and Displays information on the PDP the WIRELESS HOME AV CENTER screen. respectively. ˘ EXIT button ´ ANTENNA button Exits the menu. Alternates the input between Air and Cable. ¿ UP/DOWN/LEFT/RIGHT buttons ˇ Number buttons Controls the cursor in the menu. Select the channe
Inhaltszusammenfassung zur Seite Nr. 10
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 10 Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center. WIRELESS HOME AV CENTER Problem Possible Solution Poor picture quality Try another channel. Adjust the antenna. Check all wire connections. Poor sound quality or no sound. Try another channel. Adjust the antenna. Make sure the “MUTE” butt
Inhaltszusammenfassung zur Seite Nr. 11
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 11 Troubleshooting PDP (Continued) Problem Possible Solution PDP set is turned on and the message “No Wireless Signal or Please Check WIRELESS HOME AV CENTER Power” appears. Cause 1: The WIRELESS HOME Solution 1: Turn on the PDP set and then turn on the AV Center as they have AV CENTER is turned off. separate power supplies. Cause 2: The message still appears Solution 2: Check if AV Receiver’s LED at the top of PDP set and the AV despite the
Inhaltszusammenfassung zur Seite Nr. 12
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 12 Troubleshooting PDP (Continued) Problem Possible Solution The message “Not supported sound format” appears. Cause: Digital Audio rather than Solution: AV Center cannot handle the Audio Mode except AC-3. Switch the input AC-3 (such as DTS, MPEG-1 or to AC-3, or alternatively select Set-Up in the Menu, move to Sound In/Out then MPEG-2) was entered for Audio switch Digital Input to Lt/Rt. when SPDIF Input is selected in the Component Mode resultin
