Inhaltszusammenfassung zur Seite Nr. 1
Digital Imaging System
Operating Instructions
(For Copy & Network Scan Functions)
Model No. DP-180
Before operating this equipment, please read these instructions completely
and keep these operating instructions for future reference.
English
Getting To Know
Appendix Problem Solving Network Scanner Function Making Copies Before Starting
Your Machine
Inhaltszusammenfassung zur Seite Nr. 2
Getting To Know Your Machine Useful Office Functions Copy Fax/Email • Copy up to FLS size originals. • Plain Paper High-speed Super • Capable of copying text/photos/ G3 compatible Fax with JBIG halftone originals. compression. • Quick-Scan • Quick Memory Transmission Scan/File • Email Function capability. • Monochrome/Colour scanner capability. Print • Scanning resolution up to: Monochrome : 600 dpi • Printer controller standard, Color : 300 dpi printer resolution 300 or 600 •A document can be s
Inhaltszusammenfassung zur Seite Nr. 3
Operating Instructions Outline ● Precautions (See pages 7-13) ● Quick Operation Chart, Adding Paper (See pages 14, 15) Getting To Know ● Problem Solving, Memory Full, Your Machine Replacing Toner Cartridge, Removing Misfed Paper, Error Codes (U Code/J Code) (See pages 15-21) ● Control Panel Key/Indicator Names Before Starting (See pages 22, 23) ● Operating Instructions for making copies Making Copies (See pages 24-33) ● Changing the Initial Machine Modes Function ● General, Copier, Printer and S
Inhaltszusammenfassung zur Seite Nr. 4
Getting To Know Your Machine Symbols/Icons The following Symbols/Icons are used throughout this operating instructions manual. Place original(s) on the ADF Getting to know your machine Before starting Place original on the Platen (Book) When making copies Place original on the Platen (Sheet) Press any Hard Key on the Control Panel When setting the machine modes Press Hard Key When scanning document(s) Input numbers ● Number of Copies, etc. Input text with a keyboard Problem solving Go to next st
Inhaltszusammenfassung zur Seite Nr. 5
Getting To Know Your Machine Table of Contents Getting to Know Your Machine Useful Office Functions .................................................................................................................. 2 Multi-Tasking Job Table .................................................................................................................. 2 Operating Instructions Outline ...................................................................................................... 3 Symbol
Inhaltszusammenfassung zur Seite Nr. 6
Getting To Know Your Machine Table of Contents Network Scanner Document Scanning ..................................................................................................................... 46 ■ Document Scanning ....................................................................................... 46 Address Book ................................................................................................................................ 48 ■ Adding your PC's IP Address ............
Inhaltszusammenfassung zur Seite Nr. 7
Getting To Know Your Machine Precautions ■ Laser Safety LASER SAFETY This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. ■ Caution Label 7 Getting To Know Your Machine
Inhaltszusammenfassung zur Seite Nr. 8
Getting To Know Your Machine Precautions For Your Safety To prevent severe injury and loss of life, read this section carefully before using the Panasonic DP-180 to ensure proper and safe operation of your machine. ■ This section explains the graphic symbols used in this Operating Instructions manual. WARNING: Denotes a potential hazard that could result in serious injury or death. CAUTION: Denotes hazards that could result in minor injury or damage to the machine. ■ This section also explains t
Inhaltszusammenfassung zur Seite Nr. 9
Never touch a power cord with wet hands. Danger of electric shock exists. If the power cord is broken or insulated wires are exposed, contact your Service Provider for a replacement. Using a damaged cord can cause fire or electric shocks. Stop operation immediately if your machine produces smoke, excessive heat, unusual noise, or smell, or if water is spilt onto the machine. These conditions can cause fire. Immediately switch Off and unplug the machine, and contact your Service Provider. Do not
Inhaltszusammenfassung zur Seite Nr. 10
Getting To Know Your Machine Precautions CAUTION Do not place a magnet near the safety switch of the machine. A magnet can activate the machine accidentally, resulting in injuries. Do not use a highly flammable spray or solvent near the machine. It can cause fire. When copying a thick document, do not use excessive force to press it against the document glass. The glass may break and cause injuries. Never touch a labelled area found on or near the heat roller. You can get burnt. If a sheet of pa
Inhaltszusammenfassung zur Seite Nr. 11
For Your Safety ■ The maximum power consumption is 1000 W. A properly wired (grounded), dedicated, 4A, 220-240V AC outlet is required. Do not use an extension cord. The power cord on this machine must be used to disconnect the main power. Please ensure that the machine is installed near a wall outlet and is easily accessible. Caution Note: Unplug the power cord from the wall outlet before removing covers. Supplies ■ Store the Toner Cartridge and paper in cool areas with low humidity. 2 2 ● Use h
Inhaltszusammenfassung zur Seite Nr. 12
Getting To Know Your Machine Precautions Installation For U.K. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362 Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when th
Inhaltszusammenfassung zur Seite Nr. 13
■ Key Operator Password ● The Initial Machine Modes can be checked or changed with the Function Modes, however, these modes require the Key Operator Password. For Key Operator : When setting up this machine, please consult with the authorized service provider, and decide on the Key Operator Password together, then record it and keep it in a safe place for future reference. ■ Dept. (Departmental) Code When the Department Counter function is set up, the Dept. (Department) Code INPUT DEPT. CODE inp
Inhaltszusammenfassung zur Seite Nr. 14
Getting To Know Your Machine Operation Chart ■ Quick Operation Chart 1 2 Face Up From ADF If set in other function mode Original Guide* Tray or Adjust to the (Max. 50 A4 original's width size originals) *Hold the guides by the center when adjusting the width. Turn the Power From Switch on the Platen Left side of the Original Guides machine to the Face Down Adding Paper ON position. ● If the original is not positioned properly, a portion of the original Pull the Exit Tray may not be copied. until
Inhaltszusammenfassung zur Seite Nr. 15
3 4 5 Reduction/ Enlargement only A4 ->A4 [A4 1] A4 ->A5 [A4 1] ZOOM:100% COPIES:001 ZOOM: 71% COPIES:001 Number of Copies Select desired settings (Max. 999) (See pages 24-33) ■ Copying onto Transparency Film (OHP), Thick Paper Stock, etc. (except thin paper) Before Pressing Start Key Making Copies 1 Open rear cover. 2 Catch the ejected copy (do not pull). When finished close the rear cover. 3 NOTE: Do not open the Rear Cover when copying thin paper as it may cause a paper jam. Catch Rear
Inhaltszusammenfassung zur Seite Nr. 16
Getting To Know Your Machine Operation Chart ■ Problem Solving ● Replacing Toner Cartridge and/or Drum Unit 1 Low Toner Warning Low Toner message will follow this progression: (Replace the New Toner before toner runs out) Toner is Low. TONER IS RUNNING LOW 1 U13 Machine can make less than 500 copies*. * Based on 5% coverage. (See page 11) Front Cover WARNING TONER LOW Toner is nearly Empty. 2 LESS THAN 50 PAGES Machine can make less than 50 copies. 4 OUT OF TONER Toner is Empty. 3 U13 Machine s
Inhaltszusammenfassung zur Seite Nr. 17
2 3 1 To replace the Toner Cartridge: Drum/Toner Unit Drum/Toner Unit Perform steps (4 - 14). (Skip step 6) 2 To replace the Drum Unit: Perform steps (4 - 18). (Skip steps 5, 7 and 10) 4 3 To replace the Toner Cartridge and Drum Unit: Perform steps (4 - 18). To replace the Toner Cartridge only: For replacing the Drum Unit: 5 6 7 Drum 8 Shake 10-15 times Protective Sheet New Drum Unit Tape and Protective Cover Clean the excess toner with a soft cloth. (ATTENTION) ● Do not remove the (ATTENTION) p
Inhaltszusammenfassung zur Seite Nr. 18
Getting To Know Your Machine Operation Chart ■ Problem Solving ● Removing Misfed Paper (Paper Feed/Paper Transport/Automatic Duplex Unit Area) J44, J82, J83: 1 2 (Ex.) REMOVE MISFED PAPER J44 Rear Cover Misfed Paper NOTE: 6 7 The J## Code indicates the most Misfed Paper Pin Pin probable Jam location. If the jam message reappears after the jam is cleared, paper is most likely jammed at other location(s). Check the Jam Error Codes Table on page 20 for other check points and remove all Paper Releas
Inhaltszusammenfassung zur Seite Nr. 19
3 4 5 Rear Paper Tray Cover 6 Paper Tray Rear Cover 8 9 Front Cover Paper Tray 3 4 5 Drum/Toner Unit Misfed Paper 6 Misfed Paper 8 (ATTENTION) ● Do not scratch or touch the surface of the Front Cover OPC Drum (Green) with bare hands. The OPC Drum is sensitive to light. To prevent optical exposure problems, do not expose the OPC Drum to direct sunlight or bright light. 3 4 5 Misfed Paper Paper Transport Knob ADF Cover Remove Misfed Paper Remove Misfed Paper 19 Getting To Know Your Machine
Inhaltszusammenfassung zur Seite Nr. 20
Getting To Know Your Machine Operation Chart ■ Problem Solving ● User Error Codes (U Code) U20/U21 U90 U01 U13 U16 Code Check Points Code Check Points U01 Front Cover is open. U20 ADF Cover is open. U13 Low Toner. (See page 16) U21 ADF was opened while feeding a document. U16 Drum Unit/Toner Cartridge is not installed U90 Battery requires replacement. correctly. (See page 58) ● Jam Error Codes (J Code) Code Check Points Code Check Points J00 1 Remove paper from the Sheet Bypass. J70, Remove misf
