Inhaltszusammenfassung zur Seite Nr. 1
Easy-Fax 90si
Secure Facsimile Gateway
Reference Guide
www.
GateWay
GWFS Fax
.com
Systems, Inc.
Virginia, USA
Toll Free: 1-877-951-9800
Email: help@gwfs.com
http://www.gwfs.com
Revision 3.3
7 January 2005
Inhaltszusammenfassung zur Seite Nr. 2
90si Reference Guide CONTENTS 1.0 Configuring your STU-III for the 90si 3 1.1 AT&T Security Plus 3 1.2 AT&T, Lucent and General Dynamics 1100 (*1) 4 1.3 AT&T, Lucent, General Dynamics 1900 SDD (*1) 5 1.4 GE/RCA 2400 6 1.5 GE 9600 7 1.6 Motorola SECTEL 1000/1500 8 1.7 Motorola SECTEL MMT 1500 9 1.8 L-3 Communications STE 10 2.0 90si Status LED's 11 2.1 Power-up 11 2.2 Communications Errors 11 2.3 System Errors 11 2.4 Contact GFS Customer Service 11 3.0 Glossary of Secure Facsimile Terms 12 *1. Ga
Inhaltszusammenfassung zur Seite Nr. 3
90si Reference Guide 1.0 Configuring your STU-III for the 90si The most common cause of 90si operational problems are attributed to not having the STU-III's Secure Data port configured for "Synchronous" operation. The following sections provide step- by-step instructions for configuring various secure telephones for "Synchronous" operation as well as setting "speed" and "duplex" to provide optimum performance with the 90si. The "Press" column indicates which button on the secure telephone should
Inhaltszusammenfassung zur Seite Nr. 4
90si Reference Guide 1.2 AT&T, Lucent and General Dynamics 1100 Objective: To set Secure Data Mode for 9.6 Kbps, Full Duplex, Synchronous. While On or Off-Hook: Press Display MENU MAIN MENU / Secure Voice NEXT MAIN MENU / Secure Data SELECT Ex. SD:9.6 FDX, ASYNC / 2.4 Full Duplex NEXT (until...) 9.6 Full Duplex SELECT Async NEXT Sync SELECT SD:9.6 FDX, SYNC / previous menu MENU (standby display) Objective: To set MODEM; OUTPUT to -6 dBm and CONFIG to TRELLIS (*1) While On Hook and with Master C
Inhaltszusammenfassung zur Seite Nr. 5
90si Reference Guide 1.3 AT&T / Lucent / General Dynamics SDD 1900 Objective: To set Secure Data Mode for 9.6 Kbps, Full Duplex, Synchronous, 8 Data Bits. While On or Off-Hook, READY on or off: Press Display MENU MAIN MENU / Secure Data SELECT Ex. SD:9.6 H, ASYNC,8 / 2.4 Full Duplex NEXT (until...) 9.6 Full Duplex SELECT Ex. SD:9.6 F, ASYNC,8 / async NEXT SD:9.6 F, ASYNC,8 / sync SELECT SD:9.6 F, SYNC,8 / previous menu MENU On-Hook / Push Ready Objective: To set MODEM; OUTPUT to -6 dBm and CONF
Inhaltszusammenfassung zur Seite Nr. 6
90si Reference Guide 1.4 GE / RCA 2400 Objective: To set Secure Data Mode for 2.4 Kbps, Full Duplex, Synchronous. While On-Hook (to permanently change set-up): Press Display PROGRAM RCA STU-III Type I SET-UP (back of unit) Do You Want To Set term Options? * (YES) Do You Want To Set Standard Options # (NO) TONE Dialing in ON/OFF Change? # Comm. Mode FULL/HALF DUX Change? # Remote Capability is DISABLED # Configure Data Port? * (Example) Data Mode 2400 ASYNC Change? * (until...) Data Mode 2400 SYN
Inhaltszusammenfassung zur Seite Nr. 7
90si Reference Guide 1.5 GE 9600 Objective: To set Secure Data Mode for 9.6 Kbps, Full Duplex, Synchronous. While On-Hook (to permanently change set-up): Press Display MENU / DELETE GE STU-III Type I (then...) View KSD or ID? # (NO) Configure Terminal? * (YES) Control is Local/Change? # Dialing Mode/Tone Change? # Communication Mode/Full Duplex Change? # Initial Voice Rate/Voice = 4800 Change? # Ex. Data Mode 4800, ASYNC,/EC OFF Change? * Data = ASYNC Change? * Data = SYNC Change? # Data = 4800
Inhaltszusammenfassung zur Seite Nr. 8
90si Reference Guide 1.6 Motorola SECTEL 1000 / 1500 Objective: To set Secure Data Mode for 2.4/9.6 Kbps, Full Duplex, Synchronous. While Off-Hook and in CLEAR mode: Press Display PRGM Ex. DATA = 2400 ASYNC SCROLL (until...) DATA = SYNCHRONOUS PRGM PRGM (current call status displayed) While On-Hook: Press Display PRGM PRGM (enunciator in display) SCROLL PLEASE WAIT (and then) # for COMSEC * TO SET OPTIONS * PRESS SCROLL TO CONTINUE SCROLL (until...) Ex. DATA=2400 ASYNC # TO CHANGE # DATA=SYNCHRO
Inhaltszusammenfassung zur Seite Nr. 9
90si Reference Guide 1.7 Motorola SECTEL MMT 1500 Objective: To set Secure Data Mode for 9.6 Kbps, Full Duplex, Synchronous. While On-Hook: Press Display PRGM PRGM (enunciator in display) SCROLL (until...) USER OPTIONS # TO SELECT # PRESS SCROLL TO CONTINUE SCROLL (until...) Ex. DATA=2400 ASYNC # TO CHANGE # DATA=SYNCHRONOUS # TO CHANGE PRGM PRGM (current call status displayed) Note: Make sure that "HD" DOES NOT appear in the display. If it does, press the "HALF-DUPLEX" button to make it disappe
Inhaltszusammenfassung zur Seite Nr. 10
90si Reference Guide 1.8 L-3 Communications STE Objective: To set Secure Data Mode for 9.6 Kbps, Synchronous. For STE’s with software V2.3 or earlier. While On-Hook: Press Display MODE SECURE DATA: A9.6 (Asynchronous, 9.6 Kbps) CHANGE Secure Data Asynchronous CHANGE Secure Data Synchronous (Sets Synchronous) SCROLL Ex. 2.4 Kbps SCROLL (until...) 9.6 Kbps MODE (blank display, standby) For STE’s with software V2.4 and later. While On-Hook: Press Display MODE SECURE SIGNALING MODE: STE/STU SCROLL S
Inhaltszusammenfassung zur Seite Nr. 11
90si Reference Guide 2.0 90si Status LED's There are two LED's located on the front panel of the 90si. The following three sections explain what the various LED states indicate. 2.1 Power-up Note: Before applying power to the 90si, make sure that all cables are securely connected and that your commercial fax device is in Auto-Receive (Fax) mode and answers on 1 or 2 rings. There are a series of LED indications during the 90si power-up sequence. Before power is supplied to the unit, both LED's wi
Inhaltszusammenfassung zur Seite Nr. 12
90si Reference Guide 3.0 Glossary of Secure Facsimile Terms Listed below are definitions of words and terms used in the 90si User's and Reference Guides. Broadcast: A signaling option in the Mil-Std-161 mode in which the transmitting device does not look for any acknowledgements during a fax transmission. Commercial Fax Device: A Commercial-Off-The-Shelf (COTS) "standard" Group III fax machine or computer-based fax device. Dual Mode: A 90si configuration which allows the local fax machine to c
Inhaltszusammenfassung zur Seite Nr. 13
90si Reference Guide STU-III: Secure Telephone Unit Generation Three. STU-IIIA: Secure Telephone Unit Generation Three Version A. US Secure telephone that can connect with a STU-IIB. GateWay Fax Systems, Inc., www.gwfs.com, 1-877-951-9800 page 13/13
