Inhaltszusammenfassung zur Seite Nr. 1
1-Line Alpha/Numeric Pager
Operating Guide
UPZZ01659ZZ
Inhaltszusammenfassung zur Seite Nr. 2
FCC Information Your pager might cause TV or radio interference even when it is operating properly. To determine whether your pager is causing the interference, turn it off. If the interference goes away, your pager is causing the interference. Try to eliminate the interference by moving the pager away from the receiver. If you cannot eliminate the interference, the FCC requires that you stop using your pager. Modifying or tampering with your pager’s internal components can cause a malfunction a
Inhaltszusammenfassung zur Seite Nr. 3
Contents Introduction...............................2 Using this Owners Guide .......................3 Controls.................................4 Display Indicators ...........................5 Belt Clip/Holster ............................6 Illuminated Display...........................7 Care and Maintenance.........................7 Installing and Using a Battery.....................8 Installing the Battery........................8 Low Battery Alarm/Warning ....................9 Memory Saver..
Inhaltszusammenfassung zur Seite Nr. 4
Introduction Congratulations on your purchase of the CONTAQ I ALP 9080 one-line alpha/numeric pager. This compact, state-of-the-art pager has many features including: o 22 Notebook Memo Locations o A Mail Drop Location o 19 Personal Message Locations o Clearvue™ Illuminated Display o Multiple Alert Tones o Silent or Vibrate Alerts o Time/Date Alarms o Out-of-Range Indicator To ensure that you understand all of the pager’s features and capabilities, please read this Operating Guide carefully befo
Inhaltszusammenfassung zur Seite Nr. 5
Using this Owners Guide o Throughout this Operating Guide the action (such as: press a key) is first, followed by a display of the results. Example: PressN, you will see: o If you want to cancel or exit a mode, press . O o If (while setting any function) you do not press any key for about 8 seconds, the display returns to standby. If this happens, start over at step 1. o When you see only the key in a description, f you can usually use either the key to scroll f forward or the key to scroll back
Inhaltszusammenfassung zur Seite Nr. 6
Controls [ To stop the page alert, press any key. To light the display, press and hold any key for two seconds. 1. Backward Scroll Key ( ) f 2. Enter/Menu Key (N) 3. Forward Scroll Key ( ) k 4. Speaker 5. Display (see next page) 6. Power/Escape Key ( ) – hold to turn power on/off O or press and release to return display to standby. 7. Strap attachment 4
Inhaltszusammenfassung zur Seite Nr. 7
Display Indicators 1. Out-of-Range Indicator and first character of the 12-Character Display 2. Alert 3. Alarm 4. Time 5. Options 6. Mail Drop/Info Service Message 7. Delete 8. Repeat 9. Month/Day 10. 12-Character Display 11. Message Status Indicator 5
Inhaltszusammenfassung zur Seite Nr. 8
Belt Clip/Holster o Line up the groove on the pager back with the groove on the holster. It fits in the holster only one way. o Slide the pager into the holster. It fits securely. o Use the spring clip to attach the holster to your belt or pocket. o You can view your messages while the pager is in the holster. o To use the function keys, slide the pager out of the holster. 6
Inhaltszusammenfassung zur Seite Nr. 9
Illuminated Display o Turn on your pager. o At the standby display, press and holdN, f or for about two (2) seconds. k o The display lights for about five (5) seconds. [ Heavy use of the Clearvue™ illumination shortens battery life. Care and Maintenance o Keep the pager dry. If it gets wet, wipe it dry immediately. o Use and store only in normal temperature environments. o Keep the pager away from dust and dirt. o To clean the pager, wipe occasionally with a damp cloth. Do not use harsh chemical
Inhaltszusammenfassung zur Seite Nr. 10
Installing and Using a Battery Your pager requires one AAA battery for power. Caution: Always use a battery of the specified size and type. Installing the Battery 1. Release the battery compartment lock. Slide and lift off the battery cover. 2. Insert a AAA battery in the compartment according to the polarity symbols (+ and -) marked inside. 3. Match the dots, slide the battery cover on and slide the lock-tab down. 8
Inhaltszusammenfassung zur Seite Nr. 11
Low Battery Alarm/Warning If the battery power is low, BATTERY LOW appears in the display once an hour while a low-beep sounds for 4 seconds. [ When the battery low indicator appears, replace the battery as soon as possible to keep your pager working at peak performance. Memory Saver Your pager’s built-in memory saver stores messages and settings for at least two minutes while you change the battery or after the battery loses power. Power On/Off o To turn power on, press and hold for about a O s
Inhaltszusammenfassung zur Seite Nr. 12
About Your Pager’s Functions There are six choices in the function menu: a Alert Set - change alert type. b Alarm Menu - set alarm for time and date. c Time Menu - set the time and date. q Option Menu - time stamp, quick view, sample alert and word wrap. a Message File - view and/or delete mail drop and memo messages. g Delete All - deletes all personal and mail drop messages. 10
Inhaltszusammenfassung zur Seite Nr. 13
Set the Time and Date Setting the Time From the standby display, go to Time Set (as shown): 1. To select the hour, press or until you f k reach the hour you want. 2. To store your selection and move to the minutes display, pressN. 3. To set the minutes and choose between 12 or 24 hour mode, press or . f k 4. To store your selection in memory, pressN. The display returns to standby. 11
Inhaltszusammenfassung zur Seite Nr. 14
Setting the Date From the standby display, go to Date Set (as shown): 1. To select the month, press or until you f k reach the month you want. 2. To store your selection and move to the day display, pressN. 3. To select the day, press or until you f k reach the day you want. 4. To store your selection in memory, pressN. The display returns to standby. 12
Inhaltszusammenfassung zur Seite Nr. 15
Choosing the Alert Type Go to the Alert Set Menu (as shown): To listen to the tones as you select them, set Sample Alert under the Options Menu on page 19. 1. To cycle through the alert types, press or . f k 2. To store your selection in memory, pressN. 3. To toggle between Auto Reset (alert tone stops after 8 seconds) and Non-stop (alert tone sounds until you press any key), press or . f k The Silent alert does not use the Auto Reset or Non-stop options. 4. To store your selection in memory, pr
Inhaltszusammenfassung zur Seite Nr. 16
Using the Alarms You can set the pager to sound an audible or vibrate alarm at the same time every day, and/or at a specific time on a certain date. When a set alarm time arrives – even if the pager is turned off – the pager repeatedly sounds a unique alert tone (different than any message alert tone pattern) or vibrates for about 20 seconds. To stop the alarm sooner, press any key. o The bell icon appears in the display when you turn on any one of the two alarms (daily and/or date). o The bell
Inhaltszusammenfassung zur Seite Nr. 17
Setting a Time Alarm To set an alarm for a specific time every day: Example: Every day at 5:54 p.m. From the standby display, go to Time Alarm (as shown): 1. To set the alarm on or off, pressf or . k 2. To enter your selection, pressN. 3. To select the hour, press or until you f k reach the hour you want. 4. To store your selection and move to the minutes display, pressN. 5. To set the minutes, press or until you f k reach the minute you want. PressN. 6. To set the alarm alert type (AUDIO ALARM
Inhaltszusammenfassung zur Seite Nr. 18
Setting the Date Alarm To set an alarm for a specific date and time: Example: February 14, at 5:54 p.m. From the standby display, go to Date Alarm (as shown). 1. To set the alarm on or off, pressf or . k 2. To enter your selection, pressN. 3. To select the month, repeatedly press or . f k 4. To store your choice and move to the next selection, pressN. 5. To set the day, hour, minutes, and alarm alert type (AUDIO ALARM or VIB ALARM), repeat steps 3 and 4. 6. To store the date alarm settings in me
Inhaltszusammenfassung zur Seite Nr. 19
Choose and Change Options o Time Stamp o Quick View o Sample Alert o Word Wrap [ To “escape” from any Option menu, press . O [ When ? appears above the selected option, that option is on. Time Stamp On or Off Time stamp adds the day, time and date that a message came in. From the standby display, go to Time Stamp (as shown): 1. PressN. The current setting appears. (The default setting is on.) 2. To change the setting, press or . f k 3. To store the selected setting and return to standby, pressN.
Inhaltszusammenfassung zur Seite Nr. 20
Quick View On or Off Quick View lets you set your pager to automatically display each message when you receive it. From the standby display, go to Quick View (as shown): 1 PressN. The current setting appears. 2. To change the setting, press or . f k (The default setting is on.) 3. To store the selected setting and return to standby, pressN. 18
