Inhaltszusammenfassung zur Seite Nr. 1
Release 2.0
b
MW810
MOBILE WORKSTATION
MODEL F5218
VEHICLE INSTALLATION MANUAL
6802988C56-A
July 2012
© 2012 Motorola Solutions, Inc. All rights reserved.
@6802988C56@
Inhaltszusammenfassung zur Seite Nr. 2
i COMPUTER SOFTWARE COPYRIGHTS The Motorola Solutions products described in this instruction manual may include copyrighted Motorola Solutions com - puter programs stored in semiconductor memories or other media. Laws in the United States and other countries pre- serve for Motorola Solutions certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola Solutions
Inhaltszusammenfassung zur Seite Nr. 3
ii III. HOW TO GET WARRANTY SERVICE: Purchaser must notify Motorola Solutions representative or call Motorola Solutions Customer Response Center at 1-800-247-2346 within the applicable warranty period for information regarding warranty service. IV. WHAT THIS WARRANTY DOES NOT COVER: A) Defects or damage resulting from use of the Product in other than its normal and customary manner. B)Defects or damage from misuse, accident, water, or neglect. C) Defects or damage from improper stin te g, opera
Inhaltszusammenfassung zur Seite Nr. 4
iii righted Motorola Solutions software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola Solutions software. Motorola Solutions software may be used in only the Product in which the software was originally embodied and such software insuch Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, altera- tion, modification, reproduction, distribution,
Inhaltszusammenfassung zur Seite Nr. 5
iv References You may need to refer to the documents listed below for further information. Publication Description Number Motorola MW810 Mobile Workstation, Product Safety and RF Exposure for mobile 6802983C01 workstation with two-way radios installed in vehicles leaflet (multilingual) 6802988C57 Motorola MW810 Mobile Workstation, R2.0, User Guide 6802988C40 Motorola MW810 Mobile Workstation, R2.0, Quick Reference Guide (multilingual) 6802988C41 Motorola MW810 Mobile Workstation, R2.0, Softwa
Inhaltszusammenfassung zur Seite Nr. 6
v Using this Manual Who Should Use this Manual This manual is intended for trained service technicians, radio engineers, and technical operation support staff who install the 810 Mobile Workstation (MW810 Model F5218) in a vehicle. What is in this Manual This manual describes the tools and equipment, planning requirements, and product inspections necessary for a smooth installation of the MW810. Notational Conventions Throughout this publication, you will notice the use of warnings, cautions,
Inhaltszusammenfassung zur Seite Nr. 7
vi This page intentionally left blank
Inhaltszusammenfassung zur Seite Nr. 8
Contents References............................................................................................ iv Internet Web Sites................................................................................................. iv Using this Manual................................................................................ v Who Should Use this Manual ................................................................................ v What is in this Manual .................................
Inhaltszusammenfassung zur Seite Nr. 9
viii MW 810 Mobile Workstation Vehicle Installation Manual Interfaces to the MW810 Mobile Workstation CPU Box.................................... 33 Expansion Board Connections ............................................................................... 35 Video In Connection............................................................................................... 36 USB Connections ................................................................................................... 37 Ser
Inhaltszusammenfassung zur Seite Nr. 10
Introduction The Motorola Solutions MW810 Mobile Workstation series is Motorola Solutions highest- performing and most rugged data communication and computing solution. It is specifically designed for the harsh conditions of the mobile environment which is unsuitable for conventional laptop or desktop computers. The MW810 Mobile Workstation consists of th ree separate interconnected components: CPU Box, Display, and Keyboard. The system can be mounted in dual airbag-equipped vehicles with pr
Inhaltszusammenfassung zur Seite Nr. 11
2 MW810 Mobile Workstation Vehicle Installation Manual • Display units with high contrast and backlight offer outstanding performance even in the most difficult lighting conditions. Display design enables shortcuts to the most important user functions. • Connection to an Automatic License Plate Recognition (ALPR) system (option). The ALPR system captures an image of license plates, processes it and compares the plate number against data base or hot list. Each of the four optional ALPR cam
Inhaltszusammenfassung zur Seite Nr. 12
Introduction 3 TM •Intel® Core i7-3610QE 2.3 GHz Quad core processor TM •Intel® Core i5-3610ME 2.7 GHz Dual core processor TM •Intel® Core B810 1.6 GHz Celeron processor
Inhaltszusammenfassung zur Seite Nr. 13
4 MW810 Mobile Workstation Vehicle Installation Manual Installation This section describes the tools and equipment, planning requirements, and product inspections necessary for a smooth installation of the MW810 Mobile Workstation. Proper planning will help to ensure that the installation is completed without difficulty and that no damage occurs to the units or the vehicle. The MW810 Mobile Workstation is a reliable product when installed correctly. However, performance can be seriously impa
Inhaltszusammenfassung zur Seite Nr. 14
Installation 5 Planning Be sure to consider the following issues when planning the installation: • Keyboard and display location relative to air bag deployment zones • Environmental considerations • Electrical guidelines • Liquid Propane (LP) gas warning • Usability by driver/operator • Vehicle vendor instructions • Local vehicle authority regulations/design rules When installing the MW810 Mobile Workstation, make sure that the CPU Box Mounting Trunnion or any support is tightly anchored to t
Inhaltszusammenfassung zur Seite Nr. 15
6 MW810 Mobile Workstation Vehicle Installation Manual • To cool the MW810 Mobile Workstation, allow sufficient space around the CPU Box for free air flow. • Select a location for the CPU Box that permits routing the RF antenna cable as directly as possible. • If you are mounting the display on a plastic dashboard, you must first reinforce the dashboard; otherwise the weight of the display may crack or break the dashboard. • Do not mount the CPU Box on a flat or concave surface where the unit
Inhaltszusammenfassung zur Seite Nr. 16
Installation 7 Provided for your reference are several air ba g deployment zone templates from automobiles used in public safety roles (Figure 2, Figure 3 and Figure 4). Vehicles equipped with air bags: An air bag inflates with great force. DO NOT place objects, including communication equipment, in the area over the air bag or in the air bag ! deployment area. If the communication equipment is improperly installed and the Caution air bag inflates, this could cause serious injury. Copyrig
Inhaltszusammenfassung zur Seite Nr. 17
8 MW810 Mobile Workstation Vehicle Installation Manual . A B 127 mm 127 mm D C (5 in.) (5 in.) E F G H I J K 200 mm 200 mm (7.8 in.) (7.8 in.) 1 HEAD CURTAIN AND FRONT SEAT-MOUNTED SIDE IMPACT AIR BAG DEPLOYMENT ZONES VIEW FROM REAR SEAT, RIGHT SIDE IS MIRROR OF LEFT SIDE A. Vehicle center-line G. Head curtain air bag zone B. Headrest H. Bottom of door windows C. Center-line of occupant I. Front door handle D. E dge of headliner J. Front seat back thorax air bag zone E. D oo
Inhaltszusammenfassung zur Seite Nr. 18
Installation 9 . SIDE VIEW OF DRIVER SIDE AIR BAG DEPLOYMENT ZONE A. Top edge of windshield B. Top of instrument panel C. Inflated air bag – steering wheel D. Centerline of steering column at mid-tilt E. Driver air bag deployment zone F. Front of steering wheel SIDE VIEW OF PASSENGER SIDE AIR BAG DEPLOYMENT ZONE A. Top edge of windshield B. Inside rearview mirror C. Instrument panel top surface zone D. Passenger side air bag module trim panel – rear edge E. Inflated air
Inhaltszusammenfassung zur Seite Nr. 19
10 MW810 Mobile Workstation Vehicle Installation Manual Equipment Ventilation The display, keyboard and CPU Box are designed to operate properly in an ambient temperature range of -22°F to 158°F (-30°C to +70°C). The MW810 Mobile Workstation CPU must be installed in an area with adequate air flow to allow for proper ventilation. Installers must install the CPU in an unobstructed location in order to allow proper air flow (see Figure 5). It is imperative to avoid installing the CPU in an encl
Inhaltszusammenfassung zur Seite Nr. 20
Installation 11 • Insert rubber grommets in all drilled holes to protect cables. • Create permanent driplines (low points) on all cable routes before cables enter roof holes, to help prevent water intrusion. Electrical Guidelines The power range requirement for operating the MW810 Mobile Workstation is 13.8 VDC +/ - 20% in a 12V battery, 16.5A (maximum) system, negative ground vetting or 27.6 VDC +/- 20% in a 24V battery, 10A (maximum) system, negative ground vetting. Be sure that the vehic
