Bedienungsanleitung Metra Electronics 99-9104

Inhaltszusammenfassung zur Seite Nr. 1

INSTALLATION INSTRUCTIONS FOR PART 99-9104
APPLICATIONS
AUDI A3
2006-2010
99-9104
KIT FEATURES
• DIN Head Unit Provision With Removable Pocket
KIT COMPONENTS
A) Radio Housing B) Pocket
Harness & Antenna Connections (sold seperately)
• 40-VW10 - VW Antenna Adapter
B
A
TOOLS REQUIRED:
(2) 86-9001 Head unit removal tools I Small Flat Blade Screwdriver
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION

Inhaltszusammenfassung zur Seite Nr. 2

99-9104 TABLE OF CONTENTS Dash Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Inhaltszusammenfassung zur Seite Nr. 3

DASH DISASSEMBLY 99-9104 AUDI A3 2006-2010 A 1 Disconnect the negative battery terminal to prevent an accidental CD LOAD short circuit. AS FM MENU AM TONE SAT RDS 2 Insert the long ends of Metra’s 86- TAPE SCAN 9001 head unit removal tools (Figure B) into the slots in the factory head unit and pull the unit out. (Figure A) 3 Disconnect the wiring. B 1

Inhaltszusammenfassung zur Seite Nr. 4

99-9104 KIT ASSEMBLY AUDI A3 2006-2010 DIN HEAD UNIT PROVISION A 1 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure A) 2 Slide the aftermarket head unit into the DIN cage until secure. (Figure B) Slide the included pocket into the 3 Radio Housing until secure. (Figure C) B 4 Install kit assembly into dash. C 2

Inhaltszusammenfassung zur Seite Nr. 5

99-9104 FINAL ASSEMBLY FINAL ASSEMBLY A A) Strip wire ends back 1/2" B B) Twist ends together C) Solder C D) Tape D Locate the factory wiring harness in the dash. Metra recommends using the 1 proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper operation. Reassemble radio and dash assemblies in reverse order of disassem

Inhaltszusammenfassung zur Seite Nr. 6

99-9104 NOTES 4

Inhaltszusammenfassung zur Seite Nr. 7

99-9104 NOTES 5

Inhaltszusammenfassung zur Seite Nr. 8

99-9104 INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV. 04/29/10 © COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION INST99-9104